Best Voltage Resistance

ANCEL BA101 12V 100-2000 CCA 220AH Automotive Battery Load Tester with ANCEL PB100 Circuit Probe Vehicle Diagnostic Volt Meter 12V/24V AC/DC Resistance Detector

Includes: 1x BA101 Battery Tester, 1x PB100 Circuit Tester.
Small compact design, fast scan and direct test results display are some of BA101’s benefits. It’s a simple and easy yet quick and accurate tool for analyzing the health of a 12V battery. It tells you everything about battery’s voltage, charge, cranking power, and how much life is left of it (level of Ohm resistance)..
It checks the alternator's charging and starter's cranking conditions. Vehicle charging system test is also available, including load voltage, unloaded voltage, ripple status and charging system status..
A MUST-HAVE TOOL - Designed for voltage & polarity testing, continuity testing, signal circuit testing, supply power/activating components, trailer lights & connections testing. It features red/green polarity indicators, follows & locates short circuits, and checks bad Ground contacts..
4 WORKING MODES - DC Voltage mode for reading the DC voltage with a resolution of 0.1 volts.
AC Voltage mode for reading the Max. voltage, the Min. voltage, and frequency.
Resistance mode for reading the resistance between the tip and auxiliary ground lead.
Diode mode for checking forward bias or reverse bias..

Check Stock

ANCEL PB100 Automotive 12/24V Power Circuit Tester Probe with ANCEL BA201 Car 12V 100-2000 CCA Battery Load Tester

...ailer lights & connections testing. It features red/green polarity indicators, follows & locates short circuits, and checks bad Ground contacts..
4 WORKING MODES - DC Voltage mode for reading the DC voltage with a resolution of 0.1 volts.
AC Voltage mode for reading the Max. voltage, the Min. voltage, and frequency.
Resistance mode for reading the resistance between the tip and auxiliary ground lead.
Diode mode for checking forward bias or reverse bias..
Easy to check the cranking and charging system condition. Cranking test displays cranking time, voltage and status, which helps you test and analyze the starting motor to check it works properly or not. Charging test displays load voltage, unloaded voltage, ripple status, charging system status to avoid damaging the battery and shortening its life greatly due to overcharging or incomplete charging..
Monitors the real-time voltage through the Waveform graph, displays current voltage, maximum and minimum voltage during ignition. According to analyze the values of discharge voltage, starting voltage, and charging voltage, you’ll know if the battery needs to be replaced or not..

Check Stock

ANCEL PB100 Automotive 12/24V Power Circuit Tester Probe with ANCEL BA301 6V 12V Battery Load Tester Car Cranking Charging System Test Tool

...ailer lights & connections testing. It features red/green polarity indicators, follows & locates short circuits, and checks bad Ground contacts..
4 WORKING MODES - DC Voltage mode for reading the DC voltage with a resolution of 0.1 volts.
AC Voltage mode for reading the Max. voltage, the Min. voltage, and frequency.
Resistance mode for reading the resistance between the tip and auxiliary ground lead.
Diode mode for checking forward bias or reverse bias..
Works on all 6V & 12V 100 - 2000 CCA lead-acid batteries, analyzes starter cranking and alternator charging condition. Cranking test to test and analyze the starting motor (cranking time, voltage, and status), and the charging test to check and analyze the charging system (load voltage, unloaded voltage, ripple status, charging system status)..
Features one-click "waveform" to record the voltage changes (current voltage, maximum and minimum voltage) in a graph during ignition. You'll know if the battery needs to be replaced or not through analyzing the values of discharge voltage, starting voltage, and charging voltage..

Check Stock

YXMY2020 Benchtop Digital Resistance Tester AT527 AC Low ohm Meter Battery Internal Resistance Meter for Testing Various Electronic Components

This instrument can test 0.0001mΩ~3.3kΩ resistance, 0.00001V~400.000V DC voltage, maximum resistance 33000 display digits, and maximum voltage 800000 display digits. The AT527/527B combines high-precision, high-resolution and ultra-high-speed measurement with 0.5% resistance accuracy and 0.01% voltage accuracy up to 70 times per second..
The instrument is used for professional sorting function, standard Handler (PLC) interface, separate output resistance HIGH / IN / LOW signal and voltage HIGH / IN / LOW signal, can fully cope with high-speed automatic sorting system to complete the automatic pipeline test, At the same time, the enhanced IO signal can directly drive the power relay and signal relay..
The instrument has built-in RS-232C interface and USB-232 interface. The instrument is equipped with universal data acquisition software, comes with database function and Excel..
The export function can be effectively applied to remote control and data acquisition and analysis..

Check Stock

Megger MIT515-US Insulation Tester, 10 Teraohms Resistance, 5kV Multi-Range Test Voltage

Insulation resistance meter measures voltage, current, capacitance, and insulation resistance in high-voltage electrical equipment.
Multiranging digital meter performs timed IR, PI, and DAR.
Memory includes time/date stamping of results and data logging.
Measures insulation resistance from 10 kilohms to 10 teraohms, voltage from 30 to 660V AC/DC, current from 0.01nA to 6mA, and capacitance from 10nF to 25 microfarads.
Safety rated to European Standard 61010-1 Category IV, 600V and is rated to IP65 to be dust-tight and protected against jets of water.

Check Stock

DUOYI Ground Digital Insulation Resistance Meters, 0-2000 Ohm DCV ACV Meter Megohmmeter Megohm

The ground resistance tester is a commonly used instrument for testing and measuring ground resistance. It is also a common tool for electrical safety inspection and grounding engineering completion acceptance. This product is suitable for grounding resistance measured by electric power, post and telecommunications, railway, petroleum, chemical, communication, mining as well as measuring low resistance conductor resistance..
High precision: Three-wire resistance compensation test method can eliminate the influence of lead resistance. Fast response: Display measurement data in approximately 5 seconds..
Withstand voltage protection: Grounding voltage file, can withstand 300VAC (1 minute), grounding resistance file, can withstand 200VAC (10 seconds)..
Three-speed measurement: 0-20 ohms (resolution 0.01 ohms), 0-200 ohms (resolution 0.1 ohms), 0-2000 ohms (resolution 1 ohm).
Indicator light guide:Power and Wiring indicator to guide the user to use correctly, power light: power indicator. Green light:Checking the test line correct or not, the 6th 5th battery installed correctly or not..

Check Stock

PA 5.0 Farad digital Power Capacitor

3 Digit Super Bright Blue Digital LED Voltage Display.
Audible Warning Tone for Reverse Polarity, Voltage Overload and Low Battery Voltage.8 Farads with digital voltage display.
Voltage Measurement Accurate to + / - 0.1 VDC.
Automatic Sleep Status When Volume Is Low Or There Is No Voltage Variation Present.
Capacitance: 8,000,000, Working Voltage: 16 VDC, Surge Voltage: 24 VDC.
Equivalent Series Resistance: 0.015 Ohm @ 100 Hz / 25°C, Capacitance Tolerance: + / - 10%.
Dimensions: 9 x 6 x 2, Unit Weight: 5.3 Lbs.

Check Stock

Amprobe AMB-45 Insulation Resistance Tester

Insulation resistance meter with built-in voltmeter to test insulation of wires, cables, transformers, and electrical motors.
Digital meter with automatic range selection.
Internal memory stores up to 4,000 test results for later download to a PC.
Measures voltage from 0 to 600V AC or DC and insulation resistance from 0 to 4,000 megaohms with 250, 500, and 1,000V DC test voltage.
Safety rated to European Standard EN 61010-1 Category III 600V and Category II 1,000V.
Internal memory to store measurements for future reference.
Insulation resistance with 250, 500 & 1000VDC test voltages: 0-4.000/40.00/400.0/4000MΩ ±3% Rdg ± 5 LSD 003c 2GΩ ±5% Rdg ± 5 LSD 003c4GΩ.
Low resistance: 0-400.0, 4000Ω 1% Rdg + 5 LSD.

Check Stock

DQGG 36V Lithium Li-ion Rechargeable Battery Replacement (36V-2.4Ah)

Universal size: 130*90*60mm and 135*75*60mm size can be used with my shop battery, suitable for 6.5 inches, 7 inches, 8 inches, 10 inches, A8/F1.
High Safety Performance: Equipped with intelligent circuit protection board, with overcharge protection, overdischarge protection, short circuit protection, overvoltage protection, load protection, high temperature protection, etc..
Service life: 1000 cycles or more, High temperature resistance (-85-392°F), high voltage resistance (≤600V), corrosion resistance, aging resistance, etc.Assembly method: 10S2P, Charging time: 1.5-2 hours, Weight: 2.1lb..

Check Stock