Best Vitrified Cbn Grinding Wheels

JET IBG-10, 10-Inch Industrial Bench Grinder (578010)

PLENTY OF POWER: Heavy-duty 1-1/2 HP motor spins wheels atr 1,800 RPM..
VERSATILITY: Fine (60-grit) and coarse (36-grit) vitrified grinding wheels..
ADAPTABLE: Pre-drilled base for mounting on a stand or workbench..
CSA/CUS CERTIFIED: This grinder follows strict guidelines and electrical requirements..
HEAVY-DUTY: Cast iron construction can handle demanding environments..

【Grinding wheel is optional:】 CBN or SDC. The CBN model is used for High speed steel material.
while the SDC model is used to grind alloy tungsten steel material..
【Angle adjustable:】 point angle 100° (90 ) ~ 135° , adjust the grinding angle by changing the positioning pin, and control accurately..
【11-Standard collet:】 Grinding range: ф3-ф13 (ф3, ф4, ф5, ф6, ф7, ф8, ф9, ф10, ф11, ф12, ф13).
【Upgrade:】Upgrade the knife seat for more accurate positioning.
upgrade the grinding seat for more convenient grinding, put it in the collet, and it can be completed once in 180 °.
【Strong DC motor:】 electronic control DC motor is stable frequency, strong horsepower, prolonged use and low noise..

Norton Gemini Aluminum Oxide bench grinder wheels are designed for general purpose bench and pedestal grinder applications on steel.
This aluminum oxide grinding wheel is designed with a vitrified bond for superb shape holding, providing resistance to wear.
Grinding wheels such as this one are a good choice for deburring and tool sharpening on bench and pedestal grinders, designed with telescoping bushings to fit most arbor hole sizes.
Designed as a tool sharpening wheel to be used with bench or pedestal grinders with operating speeds up to 2070 RPM.
Wheel Type is 01 with 12 x 2 x 1-1/2 In. dimensions and coarse alundum. Comes as a pack of 1 grinding wheel.

Easy to operate and does not need any prior sharpening experience,foolproof design able to sharpen drill bit within minutes.
Capable of setting the trimming angle to adjust the amount of material taken off on the center point of the drill bit,which will allow production of various drill bits to accommodate different material.
Capable of sharpening drill bit from 90°to 135°point angle of either a standard or split point..
Grinding wheel is optional: CBN or SDC. The CBN model is used for High speed steel material.
while the SDC model is used to grind alloy tungsten steel material.The machine comes with CBN grinding wheel as standard..
Capable of sharpening the front rake,front tip angle and clearance angle of drill bits.

Norton Premium Blue Bench and Pedestal Grinder Wheels are developed with ceramic alumina and a high-performance bond that delivers fast cuts with minimal burn.
This bench grinder is a good choice for deburring and tool sharpening on bench and pedestal grinders with operating speeds up to 5410 RPM.
Versatile on multiple surfaces including stainless steel, iron, super alloys and titanium.
Sized as a 6 inch grinder wheel with a vitrified bond, this grinding wheel is designed to have a long wheel life.
Dimensions: 6 x 3/4 x 1 Inches. Comes as a pack of 1 grinding wheels.

General purpose grinding wheels for use on bench, floor-stand and pedestal grinders.
Vitrified bonded for most economic and efficient in grinding of all types of steels.
Grinding is done on the wheel periphery only.
Aluminum oxide wheel grinds metal of high tensile strength, like steel and steel alloy.
Measures 6-inches diameter by 3/4-inches thickness.

Norton Gemini Bench and Pedestal Grinder Wheels are designed with quality, gray aluminum oxide for deburring and tool sharpening.
This bench grinder is a good choice for deburring and tool sharpening on bench and pedestal grinders with operating speeds up to 3600 RPM.
Versatile on multiple surfaces including stainless steel, hard and soft carbon steels, titanium, aluminum, brass and iron.
Sized as a 8 inch grinder wheel with a vitrified bond, this grinding wheel is designed to hold a superb shape and resistance to wear.
Wheel Type is 01 with a 8 inch diameter and Medium Grit. Dimensions: 8 x 1 x 1 Inches. Comes as a pack of 1 grinding wheels.

Norton Premium Bench and Pedestal Grinder Wheels are designed with quality, white aluminum oxide for deburring and tool sharpening.
This bench grinder is a good choice for deburring and tool sharpening on bench and pedestal grinders with operating speeds up to 4140 RPM.
This bench and pedestal wheel is specially designed for soft carbon steels, tool steels and super alloys.
Sized as a 6 inch grinder wheel with a vitrified bond, this grinding wheel is designed to hold a superb shape and resistance to wear.
Wheel Type is 01 with a 6 inch diameter and Very Fine Grit. Dimensions: 6 x 3/4 x 1 Inches with 3/4 inch thickness. Comes as a pack of 1 grinding wheels.

Advanced Material: The hardness of the CBN grinding wheel is much higher than that of ordinary abrasive, meaning that its cutting ability is stronger and sharper. Compared with diamond grinding wheels, it has more advantages in processing ferrous metals.
Broad Application: This Sharpening wheel is suitable for grinding and polishing products of various materials, such as woodturning tools, high manganese steel, alloy steel, chilled cast iron, high hardness, and soft and tough materials, which allows you to satisfy most of your daily needs.
Universal Match: Designed for use with 8-inch bench-type grinders 3600RPM (Maximum), work great on Bucktool bench grinder TDS-200DS and TDS-200C4HL, can also be matched with other brands 8” bench grinder and you have not to worry about its use restrictions.
User Experience: While sharpening high-speed steels, the grinding wheel not only has higher wear resistance and easier to maintain shape compared with ordinary abrasives but also its excellent thermal conductivity achieves cool cutting, generating much less heat.
No Maintenance: Due to the high wear resistance of the Cubic Boron Nitride coated wheel, the shape of the grinding wheel does not change much during use meanwhile it can be used for a long time and you do....