Best Viscosity Reducing Equipment

Strongest Wall Door Handle Stopper 2

  • FLEXIBLE AND DURABLE: Soft rubber Door Knob Wall Shield, your super noise reducing assistant! eco-friendly materials with good elasticity, excellent for reducing the impact noise of the contact surface. It also uses strong adhesive with good viscosity, hard to fall off..
  • SIZE AND COLOR: 1.96Diameter and with 0.20thickness, Transparent, suitable for most walls, can also be coated with decorative pigments..
  • EASY TO INSTALL:Self-Adhesive design, Match it with the position where the handle hits the wall, wipe the position to ensure it is Clean and Dry, remove the protective paper and then paste it..
  • WIDELY USED:These shock-absorbing soft rubbers can be widely used in many areas, for example, headboard, refrigerator doors, cabinet doors, toilet covers, drawers, table corners, etc..
  • REUSABLE:If you want to move them to another place, take them off, rinse them with water, dry them naturally, and then reattach them to the wall..
Check Stock

Silent Knight EVS-LOC

  • Revolutionary non-aerosol pyrotechnic delivery system with an ergonomic grip and sights for increased accuracy..
  • Superior ingredient formulation combines a powerful solution of 10% OC (2.4% capsaicinoid content) with benzyl alcohol for viscosity..
  • Delivery speed of 112 MPH keeps blasts on target, reducing the risk of blowback or drift..
Check Stock

Engine Armour - Engine, Transmission, Differential Reviver, Wear Reducer, and Mileage Booster - SAE Tested | Creates a Nano Ceramic Shield Coating over Internal Moving Parts (2oz - V4, V6 Passenger)

  • ...FICANTLY reduce soot build-up in DPF, turbo chargers and EGR valves as well as enhance engine performance - by promoting a more complete burn - thereby increasing torque, horsepower - reduced fuel consumption & emissions. We are not an oil additive but rather an inert liquid that WILL NOT mix with oil or change oil viscosity.  The effects of treatments extend PAST oil changes and can last as long as a year - depending on time and intensity of engine use..
  • Lab Reports consistently report SIGNIFICANT increases in torque, horsepower, fuel milage and reduced emissions.  Engine Armour Tech treatments not only deliver improvements in performance, but also reductions in operating costs and is proven to significantly reduce wear and increase the reliability and service life of equipment. When used in conjunction with traditional oil treatments, your machinery stand the best chance for long term reliability..
  • Engine Armour Tech ENHANCES Oil Performance by facilitating a more complete dispersion of engine oil on hot metal surfaces, providing more effective lubrication between moving metal components. INTERRUPTS the Soot & Carbon Cycle to reduce soot production by significantly reducing blow-by, increasing engine compression and boosting combustion efficacy, ....
Check Stock

Campbell Hausfeld Oil Compressor 16oz MP12 ST125312AV

  • High-quality, 30 weight, non-detergent, single viscosity oil provides necessary lubrication.
  • Ideal for all brands and models of oil-lubricated air compressors, this oil can prolong pump life by reducing valve carbon build up.
  • Finish your projects faster and easier with Campbell Hausfeld - The Air Power Expert.
Check Stock

West System 105A Epoxy Resin (32 fl oz) Bundle with 205A Fast Epoxy Hardener (7 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • BUNDLE INCLUDES: West System 105A Epoxy Resin (32 fl oz), 205A Fast Epoxy Hardener (7 fl oz), and 300 Mini Pumps Epoxy Metering Pump Set (3-Pack).
  • WEST SYSTEM EPOXY: Based on 105 Epoxy Resin, West System Epoxy is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • PRE-WARM THE RESIN AND HARDENER: Cold temperatures increase an epoxys viscosity, making it harder to dispense, mix and apply. Warming resin and hardener reduces their viscosity, so they flow easily through their dispensing pumps. To pre-warm, place the resin and hardener containers under a warming lamp or in a warm-water bath. Pre-warmed resins and hardeners will not cling as much to your mixing equipment.
Check Stock

Klein Tools 56117 Premium Synthetic Wax Wire and Cable Pulling Lubricant, 1-Quart Squeeze Bottle

  • increased load-bearing capacity, beyond 800-1000% higher than most conventional compressor oils.
  • thick, high durability film strength to prevent metal to metal contact even in high operating temperatures conditions.
  • offers both high temp continuous operation capabilities and arctic grade - 50 F.
  • multi viscosity keeps fluid requirements at a minimum eliminating the need for lower or higher viscosity oils due to temperature range.
  • Works exceptionally well on rotary, vane, screw, and reciprocal air compressors in severe service with high compression temperatures and long operating hours.
  • High purity base oils with top tier detergent pack guaranteed sludge free operation and exceptionally clean equipment.
  • exceptional bearing protection eliminates bearing vibrations and polish.
  • dramatically prolongs component life far beyond ordinary lubricants.
  • Not recommended for breathing air pumping compressors, oxygen compressors, or LPG compressors fitted on natural gas pipelines..
Check Stock

PolaDay Spearmint 9.5% 8pk (8 gels)

  • Minimizes plaque formation and enhances remineralisation to further reduce sensitivity.
  • The high water content of the gel reduces dehydration of the enamel and decreases patient sensitivity.
  • This reduces the tacky feeling and drying effect of the gel in turn reducing sensitivity further.
  • The high viscosity gel ensures it can be easily and securely placed into the tray and remains in the tray for the entire procedure.
  • The pleasantly flavored spearmint gel is both fresh and long lasting.
Check Stock

West System 105B Epoxy Resin (126.6 fl oz) Bundle with 205B Fast Epoxy Hardener (27.5 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • BUNDLE INCLUDES: West System 105B Epoxy Resin (126.6 fl oz), 205B Fast Epoxy Hardener (27.5 fl oz), and 300 Mini Pumps Epoxy Metering Pump Set (3-Pack).
  • WEST SYSTEM EPOXY: Based on 105 Epoxy Resin, West System Epoxy is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • PRE-WARM THE RESIN AND HARDENER: Cold temperatures increase an epoxys viscosity, making it harder to dispense, mix and apply. Warming resin and hardener reduces their viscosity, so they flow easily through their dispensing pumps. To pre-warm, place the resin and hardener containers under a warming lamp or in a warm-water bath. Pre-warmed resins and hardeners will not cling as much to your mixing equipment.
Check Stock

Mobil 1 Transmission Fluid - Dexron-VI - ATF - Synthetic - 1 qt - Set of 6

  • Backward compatible with previous DEXRON automatic transmission fluids and can be used as a much-improved replacement for older vehicles/transmissions originally using previous DEXRON fluids.
  • Improved performance over previous DEXRON fluids in: friction durability, viscosity stability, aeration and foam control, and oxidation resistance..
  • Designed for anti-wear protection and shear stability.
  • Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.
  • ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
Check Stock