Best Vices And Clamping Tools

BESSEY KRE3524 PAIR 24' K Body REVO Parallel Bar Clamp Now With Hex Key Clamping

Two (2) 24" KRE3524 clamps: 24" of clamping capacity, a 3-3/4" throat depth, a 10" to 28-3/4" spreading capacity, and up to 1700 lbs. of clamping force!.
Newly-designed 2-part handle can receive a hex key or driver in its end to provide more clamping force if desired, or just easier clamping for those who have issues with wrist strength..
Improved operating jaw design means once you put it in place, it stays in place and is ready for clamping..
Comes equipped with three removable pressure caps for the clamping surfaces that are glue-, paint-, and solvent-resistant and help provide protection for delicate work-pieces.
and two adjustable and removable work-piece supports on the bar prevent any contact between the bar and your project..
Easily converts to spreader without tools!.

Check Stock

Kreg K5 Pocket-Hole Jig

The new Kreg Jig K5 is packed with features your are sure to appreciate.
It comes with a convenient front-mounted clamping handle, and it's connected to a ratcheting clamp mechanism that adjusts without tools or lock nuts.
The quick-release Drill Guide Block makes set up simple.
Front-mounted clamp handle makes clamping easy.
Ratcheting clamp mechanism adjusts without tools.
Quick-release pin holds drill block in place, and can't get lost.
Storage Wings provide built-in storage for bits, screws, accessories.
Stop-Collar Setting Block makes drill bit setup easyDescriptionThe New Kreg Jig K5 Is Packed With Features Your Are Sure To Appreciate. It Comes With A Convenient Front-Mounted Clamping Handle, And It'S Connected To A Ratcheting Clamp Mechanism That Adjusts Without Tools Or Lock Nuts. The Quick-Release Drill Guide Block Makes Set Up Simple, And The Removable Support Wings Support Large Work Pieces And Provide Additional Storage Inside. Dust-Collection Is Also Standard, With A Swiveling Dust-Collection Port For Ease Of Use. Adding In The Adjustable Workpiece Stop, Hex-Shank Drill And Driver Bits, A Screw-Selection Chart, And The Durable Construction You Expect From Kreg, And You Have The Most Advanced Kreg Jig Yet..

Check Stock

Royars Update 90 Degree Positioning Squares Right Angle Clamps for Woodworking,2 Pack（5.5 *5.5 ）Aluminium Alloy Corner Clamp Woodworking Carpenter Clamping Tool for Picture Frame Box Cabinets Drawers

【Super High Quality 90 degree clamps for woodworking】Our clamping square kit is processed by aluminum alloy and stainless steel, surface anodized....
【Best Use Effect of woodworking tools】There are seven holes on each side of our squares, which has stronger clamping force. This corner clamps for....
【Superb Details of woodpeckers tools】This 14cm carpentry right angle jig set have beveled edges, easy to handle and won't damage fragile cutting....
【Widely Use of woodworking clamps】This Royars woodpeckers tools for woodworking professional use to assemble and DIY by claping boxes, drawers,....
【Best Choice for Woodworking】:The actual use of professional woodworking work and sales volume shows that this size(140mm/5.5 inch )of clamping....

Check Stock

Quick Mount File Handle SH 220 for Needle Diamond and Small Files

ADD A LARGE HANDLE- To your files, reamers, hacksaw blades and other tang handled tools.
ONE HANDLE FOR MANY TOOLS- Attach to your uncomfortable tang-handled tools to tool handle to create a large maneuverable gripping surface.
POWERFUL HOLD- Steel parallel clamping jaws grip the entire length of the tang to prevent slipping and creates better tool control.
WOOD HANDLE- Won’t slip in your hand during use yet is comfortable and easy to control.
QUICK TOOL CHANGE- large, quick adjusting knurled knob ensures positive locking.
The General Tools and Instruments 890 File and Tool Handle adsd a large, maneuverable gripping surface to your uncomfortable tang-handled tools.
The steel clamping jaws grip the entire length of the tang for a powerful hold under heavy duty working conditions.
Additionally, the knurled adjusting knob provides positive locking and the effortless swapping of tools.
Use the rust proof handle to hold files, reamers, hacksaw blades.
At just over 1 inch around, it fits perfectly in the hand for comfortable and easy working.

Check Stock

90 Degree Clamp Cabinet Clamp 5.5 x 5.5 14 x 14cm Aluminum Alloy Right Angle square Tool Corner Clamps for Woodworking Tools Right Angle Clamp Drawers Picture Frame 2pack

Our clamping square tools are machined from aluminum alloy and stainless steel, the surface is anodized, corrosion-resistant, not easy to fade, and....
This corner clamps for woodworking tools has two measurement units, metric and imperial. It is laser-engraved and the scale is on the front of the....
wood working tools and equipment show that this size set is a scientific and appropriate length size selection.It can work with a clamping tool to....
The actual use of professional wood working work and sales volume shows that this size (140mm/5.5 inch ) of clamping squares are a very scientific and....
Best choice for your box woodworking work. We provide a one-year warranty service and opened a 24-hour customer service hotline.It is a unique gift....

Check Stock

Wood Lathe Chuck 6 inch 4 Jaws Self-Centering Lathe Chucks Thread 1 x 8TPI Lathe Chuck for Woodturning

【EXCELLENT QUALITY】：The chuck is well-designed and made of high-quality steel. The sturdy chuck can stand high-intensity work.Durable wood Lathe chuck and have a greatly service life ..
【APPLICABLE WORKPIECE SIZE】：Internal Jaw Clamping Range: 0.2-3.9inch (5-100mm). External Jaw Clamping Range: 3.8-5.3inch (98-135mm)..
【FREE ACCESSORIES】：We provide a set of installation tools for free . It can help you better install the chuck and processing on the lathe..
【HIGH PERFORMANCE JAWS】：Each jaw can be adjusted to center with superior gripping force, the self-centering improves the flexibility of the chuck , can clamping most shaped workpieces..
【APPLICATION】：Applicable to the general lathe, grinder, milling machine, drilling machine and machine accessories, woodworking machinery accessories and other machine tools and accessories..

Check Stock

Wood Lathe Chuck 4 Jaws Chuck 6inch lathe chucks for woodturning 1inch x 8TPI Thread Lathe Chucks for Woodworking

【EXCELLENT QUALITY】：The well-designed chuck body is made of high-quality iron. The sturdy chuck can withstand high-intensity work without damage. Will greatly extend the service life of the chuck..
【APPLICABLE WORKPIECE SIZE】：Internal Jaw Clamping Range: 0.47-2.2inch (12-55mm). External Jaw Clamping Range: 0.74-5.1inch (19-130mm)..
【FREE ACCESSORIES】：We will provide you with a set of installation tools. These can help you better install the chuck on the lathe..
【HIGH PERFORMANCE JAWS】：Each jaw can be adjusted to center respectively with superior gripping force, this improves chuck flexibility, clamping most shaped workpieces can also be realized..
【APPLICATION】：Applicable to the general lathe, grinder, milling machine, drilling machine and machine accessories, woodworking machinery accessories and other machine tools and accessories..

Check Stock

E. Emerson Tool Co. CXW-36 36-Inch Extra Wide All-In-One Contractor Straight Edge Clamping Tool Guide w/Story Stick

Straight Edge - E. Emerson’s Contractor Series self-clamping straight edge patented design has integral tubes running the length of the wide body construction, making it ultra rigid and light to handle..
No C-clamping - No more C-clamping! Achieve that truly straight cut using this self-clamping straight edge to guide your tools..
Extra Wide - This self clamping straight edge is extra wide for exceptional rigidity and has a low profile for obstruction-free cuts..
Flat Top - The extra low profile and flat top makes it easier for all circular saw or router straight cuts..
Contractor Series - Please note: recessed tracks accept Contractor Series Saw Plate, Router Plate, and Stop Block. But it will not work with A, Twin, or Ultra Series accessories..

Check Stock

Bessey KREX2440 K Body REVO Clamp Kit 2 x 24 In. 2 x 40 In. and 2 KBX20 Extenders

Heavy duty premium parallel clamping tool rated at 1700 lbs. of nominal clamping force.
German high-quality profiled steel rail stock.
Easily converts to spreader without tools.
Many accessories and replacement parts available.

Check Stock