Best Vertical Check Valve

Shurflo 2088-514-144 Pump

APPLICATIONS: ideal for collecting, detecting, and automatic removal of condensate from air conditioning equipment, dehumidifiers, high efficiency furnaces, condensing boilers, and other equipment.
galvanized steel "quick install" wall mount bracket.
rubber feet for vibration noise dampening.
INCLUDES OVERFLOW DETECTION SWITCH: dual function NO and NC operation.
shuts off equipment or can be attached to audible or visual alarm or security system.
AUTOMATIC OPERATION: vertical centrifugal pump design activates when condensate reaches 2.2 inches.
shuts off when condensate falls to 1.6 inches.
SPECIFICATIONS: 1/30 HP, 115 Volts, 60 Hz., 1.5 Amps, 93 Watts, 3/8-inch discharge, check valve included, 84 GPH at 1-ft. lift, 21 ft. shut-off, maximum 9.1 PSI.

used in delivery and transfer of liquid applications up to 3 GPM (11.4LPM).
1/2" MPT, 115VAC 60Hz, non-corded 3 wires, built-in check valve prevents back flow of fluid.
built-in pressure switch, turn on/off at 45psi, adjustable pressure setting.

· Pressure Washer Pump - 2800psi, Max 2.5 GPM RATING, Fits 7/8" Shaft Vertical Axial Gasoline Engines in 4-7 HP - Such as some models of Troybilt, Ryobi, Generac, Briggs & Stratton,Devilbiss/Excell,Craftsman,Husky,Honda. Not fit all model series. Very Important - This pump is a heavy item. In order to save each other’s time and money, Please check the pump shaft size 7/8’’, the pump housing and mounting size, and the pressure power fit your machine or not before you place the order..
· Vertical Power Pressure Pumps COMPATIBILITY - 2400-2800psi,4-7 HP Max.#PowerStroke:PS262311,PS80944,PS80946#Excell:VR2522,VR2500,#Craftsman:580series#Ryobi:RY802700,RY8C2700,RY802700A,etc #Husky: HU80 series #Homelite UT80709 series.It can fit other type models. This pump not fit all series models, pls check your pressure washer’s mounting size, pressure power and shaft size before you buy. If you are not sure if your pressure washer would fit, please contact ' Amazon Customer Service'..
· Pressure Washer Pump Parts - Comes with Easy start valve (EZ), Thermal relief valve, Unloader & SAE gas engine flange, M22 outlet, Copper Nut 3/4 NH inlet, Keyway Stock..
· Universal Pressure Washer Pump Replacement✦This pump is a universal pressure washer pump replac....

This 3/4″ water check valve is installed in the inlet side of the circulation pumps plumbing to prevent the back flow of water through the circulation pump once the jet pump is activated.
Works on Tiger River Spas, Hot Spring Spas, and Limelight Spas..
All water check valves have arrows stamped on the outside to indicate the direction of flow which should be pointer towards the circulation pump..
Troubling Shooting: The symptoms of a non-operative check valve are.
* Water Leak – If water is leaking from around the check valve, it should be replaced. * Rattling – A rattling check valve indicates that water is not being allowed to flow properly past/ through the check valve. * Verify the check valve is installed with the flow in the correct direction. * Heater High-Limit Tripping – Poor water flow through the check valve could lead to heater high-limit tripping. Ensure the check valve is n.

Body Material:Stainless Steel 316,200PSI/PN16,ANSI B1.20.1.
Working Pressure 200 WOG,Port Types:Female x Female threaded.
Temperature range: -60 to 450 degree Fahrenheit,Suitable for full range of liquids and gas.
Check valves are used to help direct flow in one direction. The stainless steel bodies and PTFE seals are highly corrosion resistant allowing these check valves to be used with a wide variety of fluids including, but not limited to water, oil, gas, air, light alkali's, acids, biodiesel, fuels and alcohols..
Swing check valves are for horizontal use only. When fluid pushes on the stopper in the correct direction, it will "swing" open to allow flow. If flow moves in the opposite direction, it will swing shut. The check valve cannot be used in vertical applications as gravity may affect the function of the swinging motion..

1/3 HP submersible thermoplastic sump pump, handles 3/8 inch solids, vertical float switch.
Will handle temperatures up to 120 degree F.
15-inch x 13.5-inch corrosion resistant structural foam basin with gasket sealed air tight cover.
1-1/2 inch Inlet, 1-1/2 inch discharge, 1-1/2 inch vent and includes full flow check valve.

... & less foaming of your beverage dispensing..
SPACE SAVING: Low profile D system coupler features a space saving design, it has a flat head, the hose will be in a parallel connection. Compared to the basic normal size keg coupler, this coupler will save several inch of vertical height to fit narrower space in your refrigerator.solves problems of clearance issues that a lot of standard tall couplers have Perfect for applications where limited vertical space makes it difficult to tap kegs..
COMPATIBILITY: This keg coupler is compatible with North American standard "D" system sankey brand kegs. Perfect for dispensing beer, soda, cider, wine and other carbonated drinks..