Best Variable Attenuators

Saramonic Miniature 2-Channel 3.5mm Microphone & Audio Mixer with TRS & TRRS Output Cables for Cameras, Smartphones, Computers & More (AX1)

  • Battery-Free Passive 2-Channel Micro-Mixer for Powered Microphones, Wireless Microphone Receivers and other Audio Sources.
  • Two 3.5mm TRS Inputs to a single 3.5mm TRS Output with selectable Mono/Stereo output and two input level attenuators to control the audio mix.
  • Includes both TRS and TRRS Output Cables for use with Cameras, Smartphones, Tablets, Computers, Recorders and much more.
  • Incredibly Compact and Lightweight, it easily fits into even the tightest set-ups and smallest rigs and has a standard 1/4″-20 mount.
  • Ideal Mixer for Micro Wireless Systems and Battery-Powered shotgun mics like the Blink 500, Blink 500 Pro, CamMic+, Vmic mkII series and more.
Check Stock

Nooelec SMA Attenuator Kit - Bundle of 6pc 2W 50 Ohm SMA in-Line Attenuators Provides Highly Linear Attenuation from 1dB to 42dB in 1dB Increments. 1dB, 2dB, 3dB, 6dB, 10dB

  • A convenient package of 6 different 50Ω SMA in-line attenuators.
  • Includes values of 1dB, 2dB, 3dB, 6dB, 10dB and 20dB, which allows for selective attenuation of anywhere between 1dB-42dB in 1dB increments!.
  • Fantastic accuracy of / - 0.1dB through to 3GHz.
  • The values are laser-etched to ensure longevity of the labeling for the life of the devices.
  • Full 2 year warranty direct through Nooelec.
Check Stock

BOSS Audio Systems BX55 2 3 Way Pre-Amp Car Electronic Crossover with Remote Subwoofer Control

  • Front / Rear / Sub Input, Front / Rear / Sub Outputs, Remote Subwoofer Control.
  • Front High Pass Filter 65Hz to 4.5 kHz, Rear High Pass Filter 65Hz to 4.5 kHz.
  • Variable Subwoofer Filter 40 Hz – 4200 Hz, Variable High Pass Filter 65 Hz – 4.5 kHz.
  • Crossover Slope 12 dB / Octave, Variable Subwoofer Phase 0 – 180 Degrees.
  • Variable Bass Boost 0 – 18 dB, Variable Bass Boost Frequency 25 Hz – 250 Hz.
Check Stock

BOSS Audio Systems BX35 Electronic Car Crossover - 3 Way Pre-Amp Fine Tune Your High-Mid-Low Range Speaker Frequencies

  • Front / Rear / Sub Input, Front / Rear / Sub Outputs.
  • Front High Pass Filter 65 Hz to 4.5 kHz, Rear High Pass Filter 45 Hz to 1.6 kHz.
  • Variable Subwoofer Filter 40 Hz – 250 Hz, Variable High Pass Filter 45 Hz – 5 kHz.
  • Crossover Slope 12 dB / Octave, Variable Subwoofer Phase 0 – 180 Degrees.
  • Variable Bass Boost 0 – 18 dB, Variable Bass Boost Frequency 25 Hz – 250 Hz.
Check Stock

Memphis Audio VIV900.5 75W x 4 + 500W x 1 Car Amplifier

  • Features: 5-channel car amplifier, 50 watts RMS x 4 + 300 watts RMS x 1 at 4 ohms / 100 watts RMS x 4 + 500 watts RMS x 1 at 2 ohms / 150 watts RMS x 2 bridged at 4 ohms + 500 watts RMS x 1 at 2 ohms, Class D amp technology.
  • Tuning Controls: front channels: Variable high- or low pass filter (10-5,000 Hz, 24 dB/octave).
  • Rear channels: Variable high-pass filter (10-500 Hz, 24 dB/octave) / Variable low-pass filter (50-5,000 Hz, 24 dB/octave) / Bandpass filter engages both.
  • Subwoofer channel: Variable subsonic filter (10-80 Hz, 24 dB/octave) / Variable low-pass filter (50-500 Hz, 24 dB/octave) / Variable bass boost (0-18 dB at 45 Hz).
  • Other Features: Optional wireless remote subwoofer level control available, Preamp inputs, Speaker-level inputs (require speaker wire to RCA adapters), Hinged magnetic cover plate conceals top-mounted controls, 7 color selectable LED logo, 4-gauge power and ground leads and a 80-amp fuse recommended — wiring and hardware not included with amplifier, No onboard fuses — when installing multiple amps in a system, an additional 80-amp in-line Fuse between the distribution block and this amplifier is.
Check Stock

Memphis Audio VIV400.4 SIX FIVE Series 400W 4-Channel Car Amplifier

  • 65 watts RMS x 4 at 4 ohms (100 watts RMS x 4 at 2 ohms) | 200 watts RMS x 2 bridged at 4 ohms (4-ohm stable in bridged mode).
  • Front channels: Variable high- or low pass filter (10-5,000 Hz, 24 dB/octave).
  • Rear channels: Variable high-pass filter (10-500 Hz, 24 dB/octave) | Variable low-pass filter (50-5,000 Hz, 24 dB/octave) | Bandpass filter engages both.
  • Variable bass boost (0-18 dB at 45 Hz) on front and rear channels.
  • Dimensions: 10-15/16″W x 2-1/4″H x 8-1/4″D.
Check Stock

American Bass PH-2500.1-MD-V2 Class D Digital Power Car Amplifier

  • 1 ohm stable D class mono-block amplifier, 2500 Watts RMS.
  • Variable subsonic filter: 10Hz to 50Hz at 24dB per octave.
  • Variable low pass filter: 35Hz to 250Hz at 24dB per octave.
  • Two amplifiers linkable connector and selector.
Check Stock

K&F Concept 82mm Variable ND Lens Filter Cap TPU Material Filter Cap Only for K&F 82mm Adjustable Neutral Density Filter

  • 【Preuime Material】Made by TPU material , stain resistant not easy to stain, easily for carrying and cleaning..
  • 【Convenient】Directly install on filter , no need to screw on it, take off it fast, protecting lens filter from all round..
  • 【Scratch Resistant & Anti-Fall 】Soft TPU materail, more professional on anti-fall, harmless for filter frame and filter glass..
  • 【Application】This filter lens cap only fit K&F Concept variable nd filter, couldn't compatible other brands variable nd filter..
  • 【Note】This filter cap ONLY suitable for variable nd filter , couldn't be used on cpl+nd multifuctional filter, uv filter, cpl filter, fixed nd filter, black diffusion filter, magnetic filter and lens directly, before order the filter cap , please confirm your variable nd fitler size, 82mm filter cap only fit 82mm variable nd..
Check Stock

Makita XT505 18V LXT® Lithium-Ion Cordless 5-Pc. Combo Kit (3.0Ah)

  • Variable 2-speed 1/2" Hammer Driver-Drill (0-600 & 0-1,900 RPM) with Makita-built 4-pole motor delivers 480 in.lbs. of Max Torque.
  • Variable speed Impact Driver (0-2,900 RPM & 0-3,500 IPM) provides 1,460 in.lbs. of Max Torque.
  • Variable speed Recipro Saw delivers 0-2,800 strokes per minute with a 1-1/4" stroke.
  • Makita XT505 18V LXT Lithium-Ion Cordless 5-Pc. Combo Kit (3.0Ah).
Check Stock