Best Valve Spring

EWK 2 Sizes Valve Spring Compressor Kit, Valve Keeper Remover/Installer, Retainer Removal Tool for Motorcycle, Car

【 Highly Versatile 】 Specially designed to remove valve spring quickly without removing cylinder head. Works on gas or diesel overhead valve engines of automobiles, motorcycles, and boats..
【 Easy Operation 】 No need the painful C-clamp valve spring compressor anymore! This tool fast removes and installs valve keepers on most overhead valve engines with valve stems from 4.5 to 7.5mm and 7.9 to 9.5mm..
【 Smart Design 】 EWK Valve Keeper Tool has built in magnet, immediately attracts the keepers up before they dropping into the engine to avoid any potential damage. Simply push or tap the tool by hand or with a hammer to disassemble the valve set..
【 High Quality 】 Made of rust-resistant material, the valve tool will neither bend nor the valve spring get loosen. Built to last for a life time use, the real money saver for your professional workshops or garages..
【 EWK Assurance】Excellent WorKing experience guaranteed! EWK provides you premium quality tools and the best service with 12 months warranty. If there is any problem or concern with our products, please contact us for assistance..

Check Stock

Hydraulic Loader Directional Control Valve LV22RFSTKAB Joystick Regen - 10GPM 4000PSI

SPECIFICATIONS: Our 2 spool directional control valve for double-acting hydraulic rams has 21 GPM, 3 position spring center and 4 positions, SAE 10 inlet and work ports and SAE 12 outlet ports. This hydraulic flow control valve has 4-way valving, adjustable 1500 with 3625 PSI..
VERSATILE: This G series P80 DCV has a 3 position spring center and 4 positions that allows an actuator to open and close. This 2 spool control valve can be used in any hydraulic circuit..
PRECISE FLOW: Simple and compact, the hydraulic joystick valve has one spool with a 21 GPM flow rate that precisely controls the direction of the flow of hydraulic fluids. This plow valve has a wide range of applications, including in log splitters..
MANUAL CONTROL: This high-pressure control valve comes with a joystick lever actuator for controlling the spool. You can control the log splitter valve manually, without an external, additional control system..
TANDEM CENTER: This adjustable relief valve is equipped with a spring tandem center. Since the fluid directly flows back to the hydraulic tank the hydraulic orbit motor prevents overheating and reduces noise during operation..

Check Stock

16 Pack Performance Beehive Valve Springs Kit Compatible with 2002-2017 Cadillac CTS Chevrolet Camaro Corvette SS SSR Trailblazer Pontiac G8 GTO Fit for Engine LS1 LS2 LS3 LS6 LS9 8 Cyl Part# 12499224

✅【VALUABLE CHOICE】 ➤ Durable material to meet or exceed OE standard quality. ➤ Valve spring assembly with superior strength, durability and valve train stability, no matter what the application. Easily handle the increased lift in extreme stress applications. ➤ Durable construction delivers long-lasting valve springs. ➤ Decent price for valve spring kit Set of 16..
✅【FIX VALVE SPRINGS FAILURE SIGNS】Engine misfire, Tapping or ticking noise, Backfire, Compression loss..
✅【SPECIFICIATION VALVE SPRINGS】➤ Beehive-style, Complete Set of 16 ➤ Outside diameter of outer spring: 1.290 in ➤Coil Bind Height 1.220 in ➤ Spring rate: 375 lbs./in ➤ Max lift .550''.
✅【EXCAT MATCH】 Fit for GM Engine: LS1, LS2, LS3, LS6, LS9, 8 Cyl ➤Compatible with Cadillac CTS 2004-2007 5.7L 6.0L ➤Compatible with 2010-2015 Chevrolet Camaro 6.2L ➤Compatible with 2002-2013 Chevrolet Corvette 5.7L/6.0L/6.2L ➤Compatible with 2014-2017 Chevrolet SS 6.2L ➤Compatible with 2005-2006 Chevrolet SSR 6.0L ➤Compatible with 2006-2009 Chevrolet Trailblazer 6.0L ➤Compatible with 2009 Pontiac G8 6.2L ➤Compatible with 2005-2006 Pontiac GTO 6.0L.
✅【OE PART NUMBER】Single spring: 12625033.

Check Stock

COMP Cams 4705-16 ID Spring Locator Set of 16-1.300\ OD.570\ ID.060\ Thickness

Race Ready - Older style standard shims will not hold up to extreme spring pressures and high RPM's found in today's street and racing engines. COMP's hardened steel alloy seat ensures spring stability, durability and high RPM performance..
Fewer Shims, More Stability - Stacking shims is not the best way to set up valve springs to their appropriate installed height. Since they are available in multiple locator thicknesses, these locators eliminate the need to stack shims, while also adding to valvetrain stability and durability..
Protect Your Head - Valve springs should never be installed directly on aluminum heads. Protect your expensive cylinder heads by installing springs on our hardened steel spring locators..
Made to Measure - Made for both factory and aftermarket cylinder head dimensions, these spring seats are available for nearly any engine. With options in multiple O.D.'s (outside diameters), I.D.'s (inside diameters) and thicknesses, COMP has a locator to fit your valvetrain project..
Precision Machined for Consistency - Crafted in-house, using the best machining equipment, COMP Cams seats and locators are precision machined to ensure consistent thickness and inside/outside diameters for a perfect fit everytime..

Check Stock

Valve Spring Compressor for Dodge 5.7, 6.1, 6.2 and 6.4L HEMI

Designed specifically for Dodge 5. 7, 6. 1, 6. 2 and 6. 4L HEMI.
Allows for the easy removal and installation of valve springs without the need to remove cylinder heads.
Bolt-down design makes for a quick and easy install, while a unique lead screw and cage design compresses the spring, freeing up your hands for easy access to the valve locks.
The spring cage is compatible with factory and most aftermarket valve springs.
Manufactured from high-strength billet steel that will not bend or wear out like competitors' inferior aluminum valve spring compressors.

Check Stock

NICHE Cylinder Head Valve Spring Kit For 1987-2011 Yamaha Big Bear Bruin Grizzly Moto-4 Raptor Warrior Wolverine 350 400

Replaces OEM Part Numbers: Yamaha 3GD-12151-00-00, 22U-12113-00-00,1UY-12114-01-00, 1UY-12111-01-00,1UY-12121-01-00, 3Y1-12116-00-00,93210-09350-00, 3Y1-12156-00-00,3Y1-12117-01-00, 1J7-12118-00-00.
Compatible with the 1993-1999 Yamaha Kodiak 400, 1996-1999 Yamaha Wolverine 350, 2000-2011 Yamaha Big Bear 400.
Includes Intake Valve, Exhaust Valve, Valve Spring Retainers, Valve Spring Seats and Rocker Arms.
Also Includes Inner/Outer Valve Springs, Wave Washers, O-Rings, Valve Seals and Valve Cotters.
Valves and Retainers are Made of a Hardened, Heat-Treated Alloy.

Check Stock

Comp Cams Cams 531-16 Positive Stop PTFE Valve Seals for Dodge 5.7/6.2/6.4L HEMI

Premium Material - Made from PTFE, this seal offers excellent sealing properties and high temperature resistance..
Valve Spring Clearance - Offers improved clearance between the outside of the seal and the inside of the valve spring - a must for valve spring upgrades..

Check Stock

OEMTOOLS 25029 Flexible Air Valve Holder Hose 14 Length Fits 14mm and 18mm Spark Plug Holes Valve Spring Tools for Air Compressor

SAVE TIME AND PREVENT STRESS: Replace valve springs or valve stem seals without removing the engine head.
FITS MOST VEHICLES: This air holder fits engines with either an 18mm or 14mm spark plug socket size, making it compatible with the most common....
MORE ROOM TO WORK WITH: Easily connect the valve hose to the spark plug hole with the flexible 14 inches of hose, which is longer than some....
THE EASY WAY TO DO ENGINE VALVE WORK: While attempting a valve spring removal or valve seal removal, use this valve holder tool to blow compressed air....
AN ESSENTIAL PART OF A VALVE SPRING KIT: Unless you are a hobbyist wanting to take apart an engine head for educational or recreational reasons, air....

Check Stock

Tanstic 12Pcs Valve Spring Compressor with Valve Lapper Set Auto Compression C-Clamp Tool Service Kit with Valve Lapping Grinding Stick Tool for Motorcycle, ATV, Car, Small Engine Vehicle Equipment

【Package Includes】Tanstic 12pcs valve spring compressor set contains everything you need to remove and compress valve springs: 1pc solid valve spring compressor including 1pc wide C-clamp, 3pcs extension screws, and 5pcs pusher adapters in 5 sizes and 1pc hand level, 2pcs valve lappers. Practical set for easier work..
【Valve Spring Compressor】Each component is made from forged steel which guarantees superior strength and hardness, so that our C-Clamp will not bend or twist under the stress of compressing valve springs. Compressor surface is oxide finished for rust- and corrosion-resistance. Quality material for longer service life..
【Practical Size】Multiple adapters and pusher can meet your different auto mechanical needs. Valves for the Following Sizes: 16mm (OD.) 19mm (OD.), 25mm (OD, 30mm (OD.). Also with hard plastic storage case for easy carry, safe storage, and quick organization..
【Valve Grinding Lapping Stick】This tool set helps matching valve seats during the engine top-end is rebuilding. Suitable to aid in cleaning of carbon deposits off valve seats. Hardwood long Easy-grip handle for better control, less fatigue and more productivity. Rubber grinding head is easy to use and wear-resistant..
【Wide Application】Tanstic 12pcs s....

Check Stock