Best V cutting Copper Fiber

hynade CNC Blow Back Digital Air Plasma Cutter, Non-HF Pilot Arc Non-Touch Plasma Cutting Machine, THC Torch Height Control Enabled (CUT60DN)

  • ...th CNC cutting table.The plasma cutter with Non-HF Pilot Arc function (Not HF Pilot Arc) Under this function, Pilot arc will not interference to machine( HF Pilot Arc will interference to machine).
  • Suitable Material:This plasma cutter suitable cut 20mm standard mild steel, 16mm stainless steel, 16mm Alloy steel, 4mm copper, 8mm Aluminum. All the cutting thickness under the rate 220V 55Amps 60-75PSI, The cutting result may different depend on different voltage current and air pressure.
Check Stock

Plasma Cutter, HeroCut 45i, 110 Voltage IGBT Inverter Air Plasma Cutter 6mm Clean Cut, 10mm Severance Cut In 70PSI (CUT45i 110v)40A or 63A Power Breaker is suggested

  • Plasma Cutter Input Voltage 110V, 60Amps Power breaker is suggested. 40Amps cutting current,High frequency arc starting, Quality cutting thickness 6mm, Severance cutting thickness [email protected] 40Amps.
  • Very compact design, Adopt Latest IGBT inverter technology, Easy cut stainless steel, Alloy Steel, Mild Steel, Thin Copper, Aluminum, It is High Frequency Arc Starting. 1 year warranty for machine..
  • Input voltage is 110V 50/60Hz, 60Amps Power breaker is suggested. Machine maybe explode if plug it to 220V, Make sure you fix machine to correct voltage, Better use 60Amps power breaker for this machine..
  • 40Amps output, Duty cycle 60% in 40Amps, 100% in 35Amps, Air pressure range from 40-70PSI, Maybe the cutting arc not stable if the air less or over the range..
  • We supply high quality machine, very lightweight but powerful, Very easy to carry, Machine come with quality accessories and torch parts, Easy cut stainless steel, Alloy Steel, Mild Steel, Thin Copper, Aluminum. ( search torch consumables at amazon ASIN: B08BCLNL5B ).
Check Stock

YESWELDER Plasma Cutter Dual Voltage 110/220V,45 Amp Non-Pilot Arc Digital Display IGBT Portable plasma cutter machine with accessories

  • High-Frequency Cut: The high-Frequency Plasma cuts thicker materials than standard DC plasma cutters. Cuts faster with less distortion in the workpiece.It is easy to ignite arc by adopting HF arc ignition. Ideal Clean Cut 1/8"@110V,5/16"@220V.
  • Lightweight and Portable: It is convenient to do home DIY and general repairing work. Dimension: 14.8"(L)x 6.5"(W)x 12.0"(H). Weight: 11lb.
  • Widely Applied IGBT Inverter: It adopts IGBT inverter technology, features with current control, high quality and stable performance, suitable to cut stainless steel, alloy steel, mild steel, copper, etc..
  • Dual Voltage:It allows the machine to run directly on 110 V 50/60 Hz power or on 220 V 50/60 Hz with the use of a power adapter. Suitable home DIY and industrial projects..
  • Multi-protection in One Cutter: With the protection of the electric circuit against over currents, over voltages and low voltages, the cutting welder works in a more safer and professional way..
Check Stock

Plasma Cutter TIG Welder Pulse Stick Welder - CT418 3 in 1 Combo Welding Machine 180A Pulse TIG/Arc Welding 40A Plasma Cutting 110/220V Dual Voltage Digital Display Portable Welder Machine

  • ...h is easier to set up and operate. It is still an automatic dual voltage dual frequency (110/220V, 50/60HZ)..
  • ❆ 10-40Amp Plasma Cutter: 40amp plasma cutter current output @220V. Compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.
  • ❆ PULSE TIG Welder: 10-180A Pulse TIG Welder Electric Current Output @ 220V. Quality TIG welding on stainless steel, nickel alloys, copper, brass and bronze etc. The newly added PULSE function makes the welding shape more beautiful and improvers tungsten life..
  • ❆ Stick/ARC Welder: 10-160amp output current @220V. Easy arc start, stable welding arc.
  • Deep weld pool and beautiful welding shape..
  • ❆ What You Get: Our worry-free 12-month warranty, and friendly customer service. The CT-418 machine comes with a PT-31 cutting torch, TIG-17FV torch for tig welding. You also get stick holder, earth clamp, power cable, air hose, and torch consumables..
Check Stock

NEENCA Copper Knee Sleeves (Pair), Professional Knee Brace with Copper Ions Infused Fiber Technology, Premium Compression Support for Knee Pain, Sports, Workout, Arthritis, ACL, Joint Pain Relief...

  • NEENCA Copper Ions Infused Technology— Real 60% Copper Ions Infused Fiber + 21% Nylon +16% Polyester. Three-dimensional structure of woven, High-precision 3D cutting technology of knitting. With high-elastic tight and breathable compression fabric to 360° perfectly fit your kneecap curve. It will strengthen side support and maintains joint stability, effectively disperses pressure, keeping your knee warm, lubricating your joints. BEST CHOICE for sports protection and pain recovery..
  • BETTER PERFORMANCE— Overcome the defects of similar products, Medical-grade copper knee braces with no allergies and itchiness. Non-slip silicone strips and high-elastic copper fabric to avoid sliding and rolling during exercise, It will stay position all day. High copper fiber fabric has the effect of keep your knee warm and reduce stiffness, reducing inflammation and swelling, increase oxygen flow. So it will prevent potential sports injuries without sacrificing your performance!!!.
  • TARGETED RELIEF & SUPPORT— Research shows that copper fiber material significantly reduce inflammation, swelling, and relieve muscle soreness. This copper knee brace disperse the pressure and improves circulation around your knee area, which will significantly effective reduce the press....
Check Stock

TECHTONGDA CG1-100C Double Torch Track Burner Portable Handle Gas Cutting Machine 110V

  • 1. Easy to operate, smooth operation. The product moves slowly on the rails and uses thyristors to control the speed, making handling very simple due to control buttons..
  • 2. Reliable quality and durable. Body-precision high-strength aluminum alloy die-casting, the drive movement commutator using silver-copper alloy, copper power line..
  • 3. High cutting precision, the torch angle can be adjusted freely. Straight cut, can cut I, Y, V slot..
  • 4. Safe enough, scientific and reasonable control logic, clear operation buttons, while ensuring efficiency, provide sufficient security..
  • 5. Wild Application, this Flame Cutting Machine is widely applied in shipbuilding, oil production, metallurgy, metal structure and many other industrial fields..
Check Stock

TOPCHANCES 110V Cutting Machine Bench Mini Cut-off Miter Saw Steel Blade 7800RPM 3/8\ for DIY Working

  • Cuts Steel, Brass, Wood & More With Smooth, Precise Cuts.
  • 0-45 Degree Miter, 71" Power Cord, Includes 2" Blade & Table Clamp.
  • Speed 4500r/min, 3/8" Arbor, 2" Blade Diameter, .020" Blade Width, 1/2" Cutting Depth.
  • This Mini saw is compact siez and portable.Easy to use for cutting,such as metal aluminums,copper,plastic,wood,the mini saw is a diy preferred..
Check Stock

LOTOS LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter, 1/2 Inch Clean Cut, Brown & PCS22 Plasma Cutter Consumables Sets for Brown Color LTP5000D and Brown Color LTPDC2000D (22)

  • ...inimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life..
  • Product 1: ★ SAFE AND AT LOW COST: compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum..
  • Product 1: ★ THE COMPATIBLE CONSUMABLES SETS for this BROWN Color LTP5000D Plasma Cutter are "PCS22" or "PCS33". Please search "Lotos PCS22" or "Lotos PCS33".
  • ★ NOT compatible with Lotos PCON40 or PCON90 Consumables Sets or any other third part consumables set.
  • Product 1: ★ OUTPUT & PERFORMANCE: 10-50 A DC output, 1/2” ideal clean cut and 3/4” maximum severance cut under 220/240V. 10-35A DC output, 1/3" ideal clean cut and 2/5" maximum severance cut under 110/120V. SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost..
  • Product 2: Only Compatible with BROWN Color Lotos LTP5000D, LTPDC2000D..
  • Product 2: NOT Compatible with Red Color Lotos LTP5000D, LTPDC2000D..
  • Product 2: Includes: 10 Nozzles 10 Electrodes 1 Cup 1 Stand Off Guide.
  • Product 2: NOT Compatible with any other Brand and any other Model of plasma cutters.
Check Stock

Air Pneumatic Nipper Power Metal Wire Shear,Cutting Wire Dia 0.1-1.5mm,Crimping Pliers Metal Shear Cutter Scissor Cutting Wire Air Shear Cutter Tool

  • Powerful, handheld metal cutting shear cuts through 0.1mm-1.5mm.
  • Allows working pressure at 0.3-0.6 MP，Size:31*150mm.
  • Powerful, Pneumatic Metal Cutting Shear Copper (0.8mm) and Iron (0.5mm) and fast free speed of 3500 RPM.
  • Suitable for all kinds of copper, iron, plastic, leather, straw mat, refrigerant pipe, use electric heat pipe, glass fiber and other places..
  • Light weight and high base, single hand operation,New version, high strength, wear resistant, long service life.
Check Stock