Best V Type Control Valve

attwood Sahara MK2 800 GPH 12-Volt Automatic Bilge Pump

800 GPH, 12V, Fuse size: 4A, Outlet type: 3/4" & 1" barbs, Check valve: yes, Wire length: 29 1/2".
The easiest, most reliable automatic bilge pump ever designed.
The only automatic bilge pump that eliminates air-locks, Patented X-Air Impeller ejects trapped air in the pump and pipework.
Flexible Outlets: 90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation.
Single-Hand Pump Cartridge Release: Convenient when trying to access a pump located in a hard-to-reach area of the boat’s hull.
Universal Backwards Compatible Design: 7-pump mounting hole pattern for replacing any top bilge pump in its category.
SteadySwitch: Buoyancy control reduces cycling, draining the bilge not the battery.
No Pipe Or Hose Removal Required: Reduces the time that it takes to replace the cartridge.
Improved Motor Cooling/Heat Dissipation: Prevents overheating that may cause failures, such as blown fuse, leaking, etc..
Includes straight outlet and check valve.

Adjustable port for true proportional venting v 6 port settings from slow (1) to fast (6.
1/8" npt angle connection maximum operating pressure 1 1/2 psig (0.1 bar).

【Suitable For】Replacement For boost control solenoids offered by for Turbosmart, for Cobb Tuning, for AEM, for Autronic, for Haltech, for Grimmspeed and many others..
【Widely Applicable】The 35A-AAA-DDBA-1BA aluminum alloy three-barrel solenoid valve is Suitable For most turbocharging and supercharging applications and is compatible with most after-sales ECU programs..
【Adjustable Parameters】The automotive electronic boost control solenoid valve is driven by width modulation (PWM), which can stably and reliably lift the target..
【25.4 Ohm】The power of the electronic boost control solenoid valve is 5.4W, using a 25.4ohm coil, the vacuum can reach 120 PSI, voltage is DC 12V..
【Replaceability】It can be used to replace most of the boost control electromagnets, and has strong practicality. 3 port solenoid, this is the most common method for controlling boost..

...ehicles. Note: please make sure you have enough space to install before purchase and make sure your exhaust size is 3.0 inch. Professional Installation is highly recommended. 3.0” Cut-out valve Kit included: 1 x 3.0” exhaust pipe cutout valve with motor, 1 x extension harness (Length: 3.5M), 1 x wireless remote control (without battery), and 1 x control box with cigarette lighter plug..
Function: This Cut Out Valve System Kit is specifically designed for single exhaust pipe and made to enhance the performance and power of your vehicle by remotely controlling of cutout valve. The faster the exhaust could be pushed out of the engine, the faster the combustion process could start over which give more horsepower. Aggressive deep sound while ensures smooth exhaust gas flow. SPELAB Butt Joint Exhaust Band Clamp is recommended for installation..
Cutout Valve: High-quality chrome-plated steel butterfly plate and valve pipe wall thickening process. You can turn on and off from the inside of the car by remote control. Turn off the switch, keep your original, peaceful exhaust system for comfortable. Turn on the switch, you can get aggressive deep sound. The opening angle of the cutout valve can be freely controlled..
Working Environment: Working Voltage: 12V. ....

1560-watt electric heating element to heat 280 square-inch total cooking area.
Porcelain-enameled cast-iron cooking grates and cast aluminum lid and body.
.Dimensions (Inches) Lid Open : ( H x W x D) - 26 x 31.5 x 25.1(Inches).
:Dimensions - Lid Closed (inches) 14.5 H x 31.5 W x 19.5 D.
Fully assembled out of box, Infinite control burner valve settings. Fuel type-Electric. Power-1,560 W/120 V.
6-foot grounded cord. The appliance should be supplied through a residual current device (RCD) having a rated residual operating current not exceeding 30 mA.
3D interactive assembly instructions for this product are available through the free BILT app..

Piston seal adopts v-type sealing ring, good sealing, wear-resistant and stable..
Piston structure, the flow rate is 30% higher than that of traditional diaphragm type..
The valve body structure has overflow port, for fast pressure reduction.
Air compressor pressure valve switch features high accuracy and quick response.
Small size, light weight, and easy to install.

【Wide Application】The dry powder mainly used for mixing and stirring various powdery, granular, flake, lump and viscous materials in feed, chemical, metallurgical, food and other industries..
【Well Mixed】The barrel and the inner mixing blade can rotate at the same time, and the rotation direction is opposite to achieve the purpose of more uniform mixing. The barrel can be turned over 360 degrees, and there is no dead corner when mixing..
【Controllable Speed】The butterfly valve type discharge port is convenient for discharging and can control the speed of discharging. The butterfly valve rubber gasket has good sealing effect and does not leak..
【Durable and Stable】Thickened stainless steel cylinder, anti-corrosion, long service life.
high-quality copper core motor, strong power, stable and durable..
Voltage:110V,2.2kw.Double chain design with thicker chain and sprocket.Size: 110CM*80CM*102CM(43.3”*31.5”*40.1”)..

Install with Posi-Temp pressure balancing control valve to maintain water temperature control in the shower.
Built on the Moen M-PACT common valve system, allowing you to update the faucet style in the future without replacing any plumbing.