Best Usb Serial Communication

KEYESTUDIO Microbit Sensor Breakout Board V2 I2C SPI Micro USB for BBC Micro:bit

  • Particularly design this keyestudio sensor expansion board V2 for micro:bit. breaks out all the PIO ports on the micro:bit control board into 3PIN interface (GND, VCC, Signal), easy to connect it with other sensor modules..
  • Extending some commonly-used serial communication interfaces into pin or female headers with 2.54mm pin pitch, such as I2C and SPI communication pins.Allows communication between micro:bit control board and other communication devices..
  • Two kinds method to power the micro:bit board, through a black DC jack (DC 7-9V) or a mciro USB port (DC 5V) on the shield..
  • Connection Diagram, Sample Code, Using Method and Resources are provided in our wiki page. Technical support is available via email or message..
  • Solder is very clean, everything is aligned nicely, all boards are well packed after function, voltage, current testing, protected in a beautiful box. Up to FCC and CE Standard: made from environmentally friendly components and materials..
Check Stock

StarTech.com PCI Express Serial Card - 16 DB9 RS232 Ports - Low + Full Profile - Multiport Serial Adapter - PCIe Serial Card (PEX16S550LP)

  • Add 16 RS232 serial ports (DB9) to your low or full-profile computer through a PCI Express slot.
  • This 16-Port PCI Express Serial Card provides high-speed PCIe serial card with 16 DB9 RS232 ports from a single PCIe slot.
  • Multiport serial adapter card enables high-speed serial communication with data transfer rate up to 921.6 Kbps.
  • Compliant with PCI Express 1.0a/1.1 and compatible with 1x/2x/4x/ 8x/16x PCIe bus.
  • PCIe serial card / Multiport serial adapter card / Serial PCIe card / Serial expansion card / 16 port serial card / pci serial port / pcie serial card / PCI serial card / pci e serial card / pci express serial card.
Check Stock

StarTech.com 2-Port PCI Express Serial Card with 16C1050 UART - RS232 Low Profile Serial Card - PCI Serial Card (PEX2S1050)

  • MEETS INDUSTRY STANDARDS: The 2-port PCI express serial card is compliant with PCI Express 1.0a specification, and it's compatible with 1x, 2x, 4x, 8x and 16x PCI Express slots..
  • MAXIMUM COMPATIBILITY: The dual port DB9 to PCIe adapter is ideal for system upgrades in a wide range of applications including manufacturing equipment, POS equipment, and security devices..
  • HIGH-PERFORMANCE COMMUNICATION: The low-profile serial card delivers high-performance serial communication, with support for data transfer rates of up to 460Kbps..
  • SIMPLE INSTALLATION: The PCI dual serial adapter features IRQ sharing and supports plug-and-play connection. It has a standard-profile bracket installed, and an optional low-profile bracket..
Check Stock

GCAN-205 Modbus TCP to CAN Converter, Allows User to Connect Some ModTCP Master with an existing CAN Network

  • The GCAN-204 is a CAN to Modbus RTU Slave Converter with one Serial interface and one CAN interface. It allows user to connect some Modbus Master (for example: PLC, HMI, etc) with an existing CAN network. It has integrated isolation protection module and easier to install with DIN-rail..
  • CAN industrial automation control system.
  • The serial communication device is connected to CAN-bus.
Check Stock

Development Board Module Kit Fit for 850/900/1800/1900 MHz GPRS/GSM Antenna, 5~26V

  • The other power supply port leads to the 3.7--4.5V power supply for lithium battery power supply. The serial port is perfectly compatible. The TTL serial port is compatible with 3.3 and 5V microcontrollers..
  • Make sure your SIM card is not locked. The best baud rate for GPRS Shield communication is 19200 BPS 8-n-1 (GPRS Shield automatically matches baud rate by default). Quad-Band 850 / 900/ 1800 / 1900 MHz - would work on GSM networks in all countries across the world..
  • GPRS multi-slot class 10/8. GPRS mobile station class B. Compliant to GSM phase 2/2+. Class 4 (2 W @ 850 / 900 MHz). Class 1 (1 W @ 1800 / 1900MHz). Control via AT commands - Standard Commands: GSM 07.07 & 07.05 | Enhanced Commands: SIMCOM AT Commands. Short Message Service - so that you can send small amounts of data over the network (ASCII or hexadecimal)..
Check Stock

5PCS HC-05 Wireless Bluetooth Receiver RF Serial Transceiver Module Master Slave Integrated Bluetooth Module 6 Pin Wireless Serial Port Communication BT Module

  • HC-05 Bluetooth Module is an easy to use Bluetooth SPP (Serial Port Protocol) module, designed for transparent wireless serial connection setup..
  • Default baud rate:9600, Button: Press the button.
  • the module enter the AT mode. AT commands are executed only in AT mode..
  • HC-05 is able to operate in both master and slave mode. Its communication is via serial communication which makes an easy way to interface with controller or PC. It's ideal replacement to your wired serial connection..
  • HC-05 Wireless BT Module: with this HC 05 Bluetooth module,You can quickly add the Bluetooth feature to your motherboard project, and then you can use your android phone to control some gadgets, such as: switch, LED..
  • Note: The module doesn’t suitable for IOS system..
Check Stock

MakerFocus Lora SX1262 Module 868 915 MHZ LoRaWAN IoT Development Board ASR6501 MCU 128KB Flash Ultra Low Power Consumption Solar Energy Powered Design with Antenna for Arduino and Intelligent Scene

  • [ Lora Dev Board ] HTCC-AB01 is a new Dev Board, friendly designed for developers, easy to verify communication solutions.[User Manual]-Please get the link from the product description below.
  • [ Ultra Low Power Design ] 3.5uA in deep sleep. Onboard solar energy management system,can directly connect with a 5.5~7V solar panel.
  • Onboard SH1.25-2 battery interface, integrated lithium battery management system (charge and discharge management,overcharge protection,battery power detection,USB/battery power automatic switching.
  • [ Perfect Circuit Design ] Based on ASR605x (ASR6501, ASR6502), integrated CP2102 USB to serial port chip, convenient for program downloading, debugging information printing.
  • [ Strongest Protection ] Micro USB interface with complete ESD protection,short circuit protection, RF shielding,and other protection measures.
  • [ Excellent Feature ] Perfectly compatible with Ardui no.
  • Good impendence matching and long communication distance. Wide range of application scenarios - Smart Agriculture, Scenic Area Management, Industry 4.0, Urban Lighting..
Check Stock

DTECH 6 Feet USB to RS232 DB9 Female Serial Adapter Cable Windows 11 10 8 7 Mac Linux Serial to USB 2.0 (PL2303 Chip)

  • RS232 USB to serial female adapter cable allows any PC to connect serial devices and programs that communicate through COM ports.
  • DB9 Serial cable to USB adapter is designed for connecting Serial devices such as DB9 equipped PCs, routers, GPS, Programming machine, barcode scanners, label writers, serial modems, digital cameras, card readers, palm PCs and digital organizers, etc.
  • 6ft USB to serial cable with standard USB Type A Male to standard 9-pin DB9 Female RS-232 serial connector.
  • USB to RS232 adapter is with Prolific PL-2303 Chipset for widest possible compatibility with Windows 11, 10, 8, 7, XP, Vista, 2000, 98, MacOS8 or higher, Linux 2.4.0 and later, and other platforms..
  • Note that the interface is 9-pin RS232 Female socket, please make sure that your serial device with a 9-pin Male Port before purchasing this USB to serial port adapter with Prolific PL2303 chipset (NOT FTDI chip).
Check Stock

Module,Development Board Module Kit,5~26V SIM Development Module,Fit for SIM900 850/900/1800/1900 MHz GPRS/GSM,Quad-Band 850/900/ 1800/1900 MHz - Would Work on GSM Networks

  • ...ernal power supply equipment must be provided..
  • The other power supply port leads to the 3.7--4.5V power supply for lithium battery power supply. The serial port is perfectly compatible. The TTL serial port is compatible with 3.3 and 5V microcontrollers.Speaker and Headphone jacks..
  • The best baud rate for GPRS Shield communication is 19200 BPS 8-n-1 (GPRS Shield automatically matches baud rate by default).Quad-Band 850 / 900/ 1800 / 1900 MHz - would work on GSM networks in all countries across the world..
  • GPRS multi-slot class 10/8.GPRS mobile station class B. Compliant to GSM phase 2/2+. Class 4 (2 W @ 850 / 900 MHz).Class 1 (1 W @ 1800 / 1900MHz).Control via AT commands - Standard Commands: GSM 07.07 & 07.05 | Enhanced Commands: SIMCOM AT Commands..
  • Short Message Service - so that you can send small amounts of data over the network (ASCII or raw hexadecimal).Embedded TCP/UDP stack - allows you to upload data to a web server.RTC supported.Selectable serial port.Low power consumption - 1.5mA(sleep mode)..
Check Stock