Best Upvc Ball Check Valve

Premium Double Gauge CO2 Regulator - Polycarbonate Bonnet

  • Commercial Dual Gauge Design with A 60 Psi and 2000 Psi Gauge Low Pressure Gauge..
  • Primary Keg Beer Regulator 5/16 barb Shutoff with Check Valve Ball Check Valve..
  • Gray Plastic Bonnet for Easy Pressure Adjustment..
  • Co2 Keg Brass Beer Double Gauge Regulator..
Check Stock

Lemoy 1/4 Tube Push Fit Straight Quick Connect Check Valve for RO Water Reverse Osmosis System Pack of 5 5 pack+2 ball valve

  • 1/4" tube straight quick connector check valve.
  • Fits all water filter systems and RO system.
  • Quantity: 5 PCs Check Valve+2 ball valve.
Check Stock

4 Way Gas Distribution Co2 Distributor Manifold With 5/16 inch Barb/Stem Splitter Beer Integrated Check Valves for Homebrew Beer Making Brewing Tool

  • ???? Gas Manifold, Machined from a single piece of aluminum with built-in check valve protects your shunt and prevents gas backflow..
  • ???? Designed with a 2-point screw hole on the top for easy installation to other equipment. 5/16″ threaded ports barbed inlet and 5/16″ barbed outlets..
  • ???? The distributor allows you to split the gas supply into multiple lines. Each line has its own shutoff valve. Chrome Plated valves with spring loaded Ball check valve. Run with 4 lines from one CO2 source..
  • ???? Due to the one-way valve mechanism, the pressure drop between the ball valves in these manifolds is approximately 2 psi. You will need to set the pressure on the regulator to 2 psi above the pressure required in the keg.).
  • ???? Made of prime aluminum, brass and stainless steel material, which is extremely durable. MONEY-BACK GUARANTEE -customer satisfaction is our #1 policy!. If you are not satisfied with our product or if you experience any issues, Please contact us.
Check Stock

TOCHUN IBC Tote Butterfly Valve DN50 -Heavy Duty 75mm Taps Drain Connector for Water RainWater Tank-IBC Fittings Garden Irrigation Valve

  • 【75MM IBC TOTE VALVE】Specially Emphasis that this IBC tote adapter is a coarse S75x6 thread with the diameter of 2.95 inches (75mm) and the thread pitch of 0.19 inches (5mm). The diameter of Tote Tank Drain Cover is 60mm/2.36″ (Note: This is Coarse Thread not Fine Thread, please check before purchasing)..
  • 【PREMIUM QUALITY IBC TOTE ADAPTER】The IBC tote valve introduces foreign technology, made of high-density polyethylene and other engineering plastics. It is assembled with novel structure and beautiful appearance. It has been used safely for 3,000 times and passed the drop test..
  • 【SAVE TIME AND ENERGY】This IBC tote fitting is easy to install,just connect to the Water tank and you can Use it. The water tank adapter supplied with superior quality silicone gasket, which can effectively to prevent liquid from splashing around. Super durable and can be used repeatedly that perfectly save you time and money!.
  • 【REPLACEMENT TOTE WATER TANK ADAPTER】This IBC tote valve is mostly used for chemical process and acid, liquid storage buckets, and tanks outlet control valves to prevent liquid leakage. This IBC tote fitting has the advantages of anti-corrosion, acid and alkali resistance, durable, high mechanical strength, easy opening and so on..
Check Stock

75mm IBC Tote Tank Adapter Ball Valve, IBC tote valve, 2.95' Coarse Thread Tote IBC Ball Valve Connector Replacement for IBC Tote Water Liquid Container

  • 【WIDE USAGE】— 75mm IBC Tote Adapter is suitable for plastic container outlet control to prevent liquid from splashing around. Widely used in chemical process and acid, liquid storage buckets, tanks, container outlet control valves..
  • 【IBC TOTE ADAPTER】— This IBC tote tank adapter ball valve is made of high-density polyethylene and plastics, which is acid resistance, alkali resistance, corrosion resistance, high mechanical strength, and durable to use..
  • 【NO LEAK】— IBC tote fittings with inner diameter input end diameter 75mm, pitch: 0.19″ (5mm).
  • 60mm/2.36″ diameter for suitcase drain cover, liquid storage buckets, and tanks outlet control valves to prevent liquid leakage..
  • 【EASY TO INSTALL】— 2.95″ coarse thread tote ball valve is easy to install, just need to connect to the water tank to use, equipped with silicone gasket and raw material tape to enhance sealing..
  • 【PACKAGE INCLUDED】 — Purchase IBC tank drain adapter from Catilon, you can get 2.95’’ IBC adapter ball valve, IBC A200-S60*6(mm) + IBC tote valve cover + spout cap + silicone gasket (NOTE: Please carefully check the size of the IBC Tote Ball Valve before purchasing). Please confirm the thread diameter of your IBC tank adapter is 60mm..
Check Stock

Zooz Z-Wave Plus 700 Series Titan Water Valve Actuator ZAC36 | Compatible with SmartThings

  • ...ably. It calibrates on each individual valve once installed for optimal performance..
  • DIY INSTALLATION: You don't need any tools and it takes just a few minutes to mount and calibrate the device. You can use it outdoors too! Follow the steps in the manual and installation video carefully when installing the product. Check your set-up before buying: suitable for 0.5" - 1.25" ball valves only.
  • 3" clearance from the valve center to each side on the pipe, at least 1.25" clearance between the valve handle and the pipe, at least 1" clearance between the pipe and the wall..
  • Z-WAVE COMPATIBLE: Get the most of your Titan Valve Actuator when you include it to your Z-Wave hub. Program it to shut the water off if water is detected on any of your wireless leak sensors (sold separately) for complete protection. The Titan is compatible with SmartThings, Hubitat, Ring Alarm (partial integration only, displays temperature and on/off capability instead of open/close), and Home Assistant. Check with Zooz for compatibility before buying if your hub is not listed..
  • NEW 700 SERIES: This product is built on the latest 700 series Z-Wave chip for better signal coverage than ever and faster communication. Equipped with S2 Security and SmartStart. 5-year manufacturer warranty and....
Check Stock

Habitech 2-Pack In-Line Barbed Ball Valve 13mm For 1/2 Inch Tubing .520 ID - Regulate and Shut-Off/On Water Flow

  • Important: Be sure to check the sizes and buy the right valve. This 13mm ball valve works with 1/2" tubing with 0.520 Inside Diameter (ID). If you need valves for 1/2" drip irrigation tubing, which has a larger inside diameter 0.570 to 0.620, then select the 16mm size valve..
  • Complete Flow Control: 1/2-inch inline ball valves (2 Pack) are the perfect way to regulate the water flow of your aquarium, aquatic or hydroponic systems with a simple turn of the knob. Slip your tubing onto the barbed ends of this shut-off valve coupling to control, disperse, slow, divert or completely stop water flow..
  • Fully Adjustable: Adjust the flow anywhere from full-open to full-stop. Easy to install and use with clear on and off markings. Compactly sized and smooth to turn, these quality acetal barb ball valves won't stick like PVC ball valves..
  • Versatile: Customize a secondary water zone, create individual dripline control, use as tank valves, drain valves, return valves or in any situation where fluid restriction is needed. For use with irrigation, aquarium plumbing, pump return line, saltwater applications, RV camper and trailers, pex tubing, hydroponics, and aquaponics..
  • Leak-Free Seal: These non-corrosive plastic flow valve fittings are guaranteed to pro....
Check Stock

Kitchen Sink Soap Dispenser Brushed Nickel Countertop Soap Dispenser Pump 47 Silicone Extension Tube Connect to The Soap Bottle Directly Say Goodbye to Frequent Refills

  • NO MORE CONSTANT REFILLING -- This sink soap dispenser pump comes with a 47” extension tube that goes directly into an original large dish soap....
  • LONG THREADED SHAFTTUBE -- The kitchen sink soap dispenser with Lengthen and thicken 3 inches threaded shaft tube fits most countertops (Granite,....
  • UPGRADED CHECK VALVE --The check valve keep the tube always filled with the washing liquid, avoiding the trouble of repeatedly pressing the washing....
  • EASY INSTALlATION -- This countertop soap dispensers comes with step-by-step instructions, works as a faucet soap dispenser, brushed steel with glair....
  • PACKING INCLUDING -- 1 x soap dispenser pump head, 1 x 47" extension tube, 1 x subuliform soap bottle stopper, 1x check valve, 1x PP ball, 3x....
Check Stock

TAPRITE E-T742 CO2 Primary Beer Dual High Pressure Gauge New - CGA 320 Inlet 5/16' Barb Shutoff (Brass Body)

  • Commercial Dual Gauge Design with A 60 Psi and 2000 Psi Gauge Low Pressure Gauge..
  • Primary Keg Beer Regulator 5/16 barb Shutoff with Check Valve Ball Check Valve..
  • Gray Plastic Bonnet for Easy Pressure Adjustment..
  • Co2 Keg Brass Beer Double Gauge Regulator..
Check Stock