Best Universal Gas Spring Lift Support

ECCPP Lift Supports Rear Hatch Struts Gas Springs Shocks for Acura RSX 2002-2006 Compatible with 6145 Strut Set of 2

FITMENT - Lift supports struts rods gas spring for Acura RSX 2002 2003 2004 2005 2006 compatible with 6145 lift support strut.
QUALITY - Rust-resistant Nitride corrosion resistant piston rod extends product life, Multi-Lobe Seal make gas springs more tolerant to vibration and extreme temperature, 100% brand new and tested to meet or exceed OEM specifications.
FUNCTION - Use compressed gas, contained in a cylinder and compressed by a piston, to exert a force to support the weight of front hood or rear liftgate tailgate trunk hatchback doors while they are open, no need to hold the door up with your head.
EASY INSTALLATION - Easy to install with simple hand tools in just minutes - no special tools required for installation.
NOTICE - Please check the description and compatibility chart before your purchasing. We provide ONE YEAR WARRANTY for all our lift supports. Please contact us if you have any question.

Check Stock

2Pcs Front HOOD Struts Lift Supports Shock Gas Spring Compatible With FORD 2010-2018 TAURUS / 2013-2018 POLICE INTERCEPTOR SEDAN / 2015-2018 SPECIAL SERVICE POLICE SEDAN (Note:)

2Pcs Front HOOD Struts Lift Supports Shock Gas Spring Prop Rod Compatible With FORD 2010 - 2018 TAURUS / 2013 - 2018 POLICE INTERCEPTOR SEDAN / 2015 - 2018 SPECIAL SERVICE POLICE SEDAN (Note: ).
Extended Length:20.39[Inch] Compressed Length:12.19[Inch] Pounds Of Force:54[LBS].
Replacement Lift Supports For:Trunk Caps, Camper,Marine,Toolbox & Universal Applications.
NOTICE - We provide THREE YEAR WARRANTY for all our lift supports. Please contact us if you have any question.Designed For Original Equipment Fit And Performance,replaced with these in just a couple of minutes,your vehicle fully opens by itself like it used to do when new.
Gently reduces the opening and closing speed as the lift support reaches the end of the cycle, reducing wear on joints and hinges. Manufactured to automotive O.E. performance and quality specifications. Restores the original opening and closing speeds of your hood, hatch or trunk. No special tools required. Exact replacement, engineered for your application. Rust-resistant piston rod extends product life. Easy lifting, reduced closing effort. Consistent lifting force through 30,000 cycles..

Check Stock

SCITOO Liftgate Lift Supports Replacement Struts Gas Springs Shocks Fit For Jeep Grand for Cherokee 2005-2010

COMPATIABLE VEHICLES - 6104 SG314044 replacement lift support strut gas spring shocks Fit For Jeep Grand for Cherokee 3.0L 2007 2008 2009 2010,For Jeep Grand for Cherokee 3.7L 2005 2006 2007 2008 2009 2010,For Jeep Grand for Cherokee 4.7L 2005 2006 2007 2008 2009 2010,For Jeep Grand for Cherokee 5.7L 2005 2006 2007 2008 2009 2010,For Jeep Grand for Cherokee 6.1L 2006 2007 2008 2009 2010 Liftgate.
HIGH QUALITY - Premium quality gas lift support - Brand New High Quality OEM Replacement.
FEATURES - Multi-lobe sealed lift bracket is more effective against vibrations and extreme temperatures, sun protection piston rod extends product life.
EASY INSTALLATION - OEM quality design ensures easy installation and precise operation, no special tools required for installation.
TIPS - Please contact us firstly if you have any question about our product.

Check Stock

Marilyn Hotchkiss' Ballroom Dancing & Charm School

✅ ARANA 20 inch Gas Struts C1608054 Lift Supports -- 2Pcs Set Force 100 Pounds 445N Gas Shocks , most SUITABLE support weight for 2 STRUTS is 85 lbs - 110 lbs, this means if your project lid is between 85 pounds and 110 pounds, this 100LB gas strut set is SUITABLE!.
✅ ARANA 20 Inch 100 Lbs Gas Spring Shocks -- Extended Length A [in]: 19.7(500mm), Compressed Length B [in]: 11.8(300mm), Interchange number: 6939, 6939S10, C1608054, C16-08054.
measurement of the supported lid weight or of your old strut pressure is required to prevent purchasing wrongly!.
✅ C16-08054 Gas Props 20inch -- Direct replacement struts for RV bed, motorhome bed, tanning bed, camper bed, travel trailer bed mattress, queen bed, etc..
Note: DO NOT compress them by hands before installing, the struts could only be compressed after installing successfully!!!.
✅ ARANA C1608054 100 lb Lift Supports -- Customer will also use them on tonneau cover, heavy camper shell roof, tv cabinet door, trailer window, compartment door, floor hatch, truck cover, bar shed window, heavy custom build lid, etc.
Very Strong, do not buy them for the lid weight less than 80 pounds.
✅100% Satisfaction Service -- 18 Months Support comes with every ARANA product.

Check Stock

BONTEC Dual Monitor Desk Mount Stand for 13 to 27 inch LED LCD Screens, Adjustable Gas Spring Monitor Arm Swivel VESA Bracket with C Clamp/Grommet Mounting Base, Each Arm Hold 6 to 14.3lbs

...to a maximum of 16.9 inch without any tool, in a horizontal direction up to a maximum of 21.3 inch (VESA plate to the mounting base), effectively reducing the burden on neck and shoulders, allowing you to move the screens in any direction so as to improve work efficiency..
Universal Monitor Arm: Our gas-spring monitor arm is intended for dual 13 to 27 inch LED/ LCD monitors with VESA mounting patterns of 75x75 mm and 100x100 mm. This VESA bracket is also suitable for diagonals smaller than the screen shown in the description.
just make sure the VESA distance is within the support area and does not exceed the load weight of the holder (between 6 to 14.3lbs)..
Sturdy & Durable: High-strength aluminum parts offer elegant and anti-scratch appearance and ensure its durability and reliability. Our monitor positions are equipped with gas springs instead of mechanical springs and can be adjusted to your needs without any jitter or noise. The integrated cable management system conceals messy cables, offering a tidy and neat work space. Compared to vertical monitor stands, these monitor arms can save up to 80% desk space..

Check Stock

Gas Spring Gas Strut Gas Shocks Soft Close Hinges Toy Box Hinges Lift Supports Lid Support Kitchen Cabinet Hinges Hydraulic Support Door Cabinet Hinge Spring Pressure 120N/26lb/12KG[2 Pack]

★ Since the gas struts need to be installed by themselves, you should consider whether you can install them independently. It is recommended: one....
★Stable & No Rusty: gas struts is made of copper core with zinc plating, which prevents from rusting even aftering using for a few years.If there is....
★Suitable for Gas Strut, Gas Spring, Lid Support, Gas Shocks, Lift Support, Lid Stay, Heavy Duty Kitchen Cabinet Doors, RV Overhead Cabinet Doors,....
Length ( hole center to hole center) :9-11/16''.
Travel:3-14/25'' ,Distance between ball mounts compressed:....
★ 1.The gas spring piston rod must be installed in the downward position, not upside-down, which can reduce friction and ensure the best damping....

Check Stock

Gas Lift Hydraulic/Pneumatic Piston for Office Chair Gas Lift Cylinder Replacement Parts,Universal Size Fits Most Executive Chairs,Includes Removal Tool,Gloves,Gas Cylinder(Black)

...REMOVEL TOOLS】Package come with one gas lift cylinder, removal tools --2 shafts(28mm/1.1" dia.), 2 bolts, 1 L wrench and a pair of gloves. You can installed easily without additional screws required, fix your sinking office chair by this standard size replacement chair piston instead of purchasing a new chair..
【UNIVERSAL SIZE THAT FITS MOST CHAIRS】This chair cylinder replacement will fit all office chair bases standard centre hole. Ideal to replace gas lift cylinder on 99% standard office chairs, task chairs, executive chairs, salon chairs and rolling stools on the market. It has a better load-bearing capacity. This office chair piston maximum weight it supports is 1000Lbs, which can support much heavier than ordinary gas cylinder for office chair..
【SAVE MONEY】Spending 5 minutes will bring a new life to your old office chair. Fix your sinking office chair by replacing the cylinder instead of spending hundred bucks for a brand new computer chair. ( Please measure dimensions before purchasing ).
【EASY INSTALLATION&GOOD SERVICE】For your convenience, the Office Chair Gas Lift Cylinder Replacement provides complete accessories and installation instructions.Sturdy packaging protecs the product during transport perfectly.If you have any problem....

Check Stock

Hood and Trunk Lift Support Gas Struts Fit for Chrysler 300 2005-2008 TUPARTS Automotive Replacement Shock Lift Supports

ONLY FIT - Gas lift supports for Chrysler 300 2005 2006 2007 2008.
Replace Reason - The hood or trunk won’t stay up?Some valve oil has leaked out of one of the ends?It could be old or defective, but regardless of....
Working S-mart - Get new lift supports shocks to instead of holding up your hood or trunk with one arm while trying to work on the car with the other....
Precise Technology - The TUPARTS gas spring shocks lift support are made of precise technology with durability and corrosion resistance,avoiding fuel....
Tips - Please check year/make/model of your vehicle by the part finder tool on the top left corner to confirm compatibility before purchase.Please....

Check Stock

ECCPP 2pcs Liftgate and 2pcs Window Glass Lift Supports Struts for GMC Yukon 1500 2500 for Chevrolet Suburban 1500 2500 for Chevrolet Tahoe for Cadillac Escalade 2000-2004

FITMENT - Lift supports struts rods gas spring for Cadillac Escalade 2000,for Chevrolet Suburban 1500 2000 2001 2002 2003 2004,for Chevrolet Suburban 2500 2000 2001 2002 2003 2004,for Chevrolet Tahoe 2000 2001 2002 2003 2004,for GMC Yukon 1999 2000 2001 2002 2003 2004,for GMC Yukon XL 1500 2000 2001 2002 2003 2004,for GMC Yukon XL 2500 2000 2001 2002 2003 2004 compatible with 4557 4185 lift support strut.
QUALITY - Rust-resistant Nitride corrosion resistant piston rod extends product life, Multi-Lobe Seal make gas springs more tolerant to vibration and extreme temperature, 100% brand new and tested to meet or exceed OEM specifications.
FUNCTION - Use compressed gas, contained in a cylinder and compressed by a piston, to exert a force to support the weight of front hood or rear liftgate tailgate trunk hatchback doors while they are open, no need to hold the door up with your head.
EASY INSTALLATION - Easy to install with simple hand tools in just minutes - no special tools required for installation.
NOTICE - Please check the description and compatibility chart before your purchasing. We provide ONE YEAR WARRANTY for all our lift supports. Please contact us if you have any question.

Check Stock