Best Under Water Plasma Cutting

FLARING Plasma Cutter Equipment 50 AMP 220V IGBT 1/2'' Clean Cut CUT50 Max 3/5‘’ Cut High Frequency Inverter Plasma Cutting Machine for Car Frame,Carbon Steel,Stainless Steel,Thin Copper,Aluminum

  • [Cutting Ability] This plasma cutter machine automatic 220v(50/60hz),10-50A dc output, 1/2″(12mm) ideal clean cut and 3/5″(15mm) maximum severance cut under 220v,70% duty cycle. The upgraded model only supports 220v voltage input..
  • [Cutting Material] Compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper,cast iron,chrome and aluminum(Aluminum≤1/4″,Copper≤1/5″).
  • [Breaker Recommendation] We suggest a 30A breaker on 220V while using this plasma cutter.Air Pressure 60-70PSI suggested.Btw,this CUT50 plasma cutting machine works well with a generator above 5000W..
  • [Fan-Runs-on-Demand cooling system]The new machine uses powerful cooling system, “dormant” fan,only operates when needed. This cuts down on fan noise, along with reducing power consumption and contaminants drawn into the machine..
  • [Warranty Assurance] We are a manufactory with over 10 years’ experience of professionals producing the plasma cutter machines,3 year’s warranty.Please add to cart and take it without hesitation.
Check Stock

PT-60 Torch Electrode Contact Tip Retaining Cap Drag Shield Cap Plasma Cutting Consumables 21pcs

  • 21pcs Plasma cutting consumables kits: 5pcs electrode + 10pcs nozzle / tip + 1pc retaining cap + 5pc shield cap.
  • The plasma arc cutting consumables kits fit PT-60 / PT60 / PT-40 plasma cutting torch ,fit LTP5500 Plasma Cutter Consumables.
  • WS OEMed Plasma Arc Cutting Torch Consumables, not originalPlasma tip / nozzle diameter: 0.9mm / 0.035in,cutting current :30-40A.
  • Plasma tip / nozzle diameter: 0.9mm / 0.035in,cutting current :30-40A.
Check Stock

Reboot Plasma Cutter Machine 50Amp Plasma Cutting Equipment CUT50D 3/5'' Cut 110/220V High Frequency 1/2'' Clean Cut,IGBT Air Plasma Cutting Machine for Aluminum Alloy Mild Steel Cast Iron

  • [Widely Application and Low Cost] 1/2” ideal clean cutting and 3/4” severance cutting under 220/240V and 2/5" severance cutting under 110/120V,air pressure 60PSI recommendation.this Plasma Cutter available for cutting most metals: stainless steel,alloy,aluminum,mild steel,carbon steel.
  • widely used for automotive, ducting work, repair/maintenance,metal processing,manufacture.
  • [SEE WHAT OUR CUSTOMER SAYS] I tried it on 120v with the air pressure turned way down on a piece of 1/8 angle iron the pilot arc worked as it should and it went through it like it wasn't even there. Next thing I tried it on was some roughly 3/8 wall tubing I needed to cut and notch for the safety cage on my figure 8 car..
  • [Generator Supported] This Plasma Cutting machine works well with a generator,but we suggest a 5000W above generator and 30A breaker needed for 220V,50A breaker for 110V.
  • [Blowing Back] Pre-made 3 seconds of blowing time after you release the torch,to cool down the torch head and consumables.[110/220V Input ]Automatic Dual Voltage / Dual Frequency (110/120 V 220/240 V 50/60Hz).
  • [Warranty] Buy this plasma cutter with confidence as Reboot offers 1-year limited warranty and free consumables guarantee,besides,you will get a local supports for any assistance.
Check Stock

SPELAB 2.5 Inch Stainless Steel Exhaust Pipe Kit

  • ★ AIR PLASMA CUTTER: SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. ★ SAFE AND AT LOW COST: compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum..
  • ★ OUTPUT & PERFORMANCE: 10-50 Amp DC output, 1/2” ideal clean cut and 3/4” maximum severance cut under 220/240V. 10-35A DC output, 1/3" ideal clean cut and 2/5" maximum severance cut under 110/120V. Engine Power : Electric (AC)★ DUAL VOLTAGE INPUT: Automatic Dual Voltage / Dual Frequency (110/120 V 220/240 V 50/60Hz)..
  • ★ BUY WITH CONFIDENCE: We offer 30 days refund and a 3-YEARS Limited Warranty: include 1 Year NEW Replacement Warranty. ★ US BASED CUSTOMER CARE & SUPPORT TEAM: please feel free to contact us by phone or email, we always stand Back on Our Products. Please submit the registration form on our website..
  • ★ THE COMPATIBLE CONSUMABLES SETS for this BROWN Color LT5000D Plasma Cutter are "LCS22" or "LCS33". Please search "Lotos LCS22" or "Lotos LCS33".
Check Stock

Plasma Cutter Table - Water table for hand held plasma cutters - w/Slats

  • Water catches plasma cutting stream without splashing back.
  • Quick release clamp holds work, guide, straight edge and our Plasma Stencils.
  • Great for portable, temporary and/or permanent use.
Check Stock

W.S SL40 Consumables Kit Electrode Tip Standoff for Thermal Dynamics Cutmaster 42 Plasma Cutter Torch 9-0093 9-0096 9-8251 QTY-22 Copper

  • 22pcs plasma cutting consumables can fit for Thermal Dynamics CutMaster 42 Plasma Cutter SL40 Torch Consumables.
  • 10pcs Plasma Cutting Electrode,ref code 9-0096.
  • 10pcs Plasma Cutting Plasma Cutting Drag Tip, ref code 9-0093, cutting current is 40A.
  • 1pc adapter sleeve, ref code is 7-2915 and 1pc standoff guide ref code is 9-8251.
  • PLAXCON OEMed Plasma Cutting Torch Consumables which fit for thermal dynamics SL40 torch , not original.
Check Stock

LOTOS LT5000D 50A Air Inverter Plasma Cutter Dual Voltage 110/220VAC 1/2\ Clean Cut

  • ★ AIR PLASMA CUTTER: SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. ★ SAFE AND AT LOW COST: compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum..
  • ★ OUTPUT & PERFORMANCE: 10-50 Amp DC output, 1/2” ideal clean cut and 3/4” maximum severance cut under 220/240V. 10-35A DC output, 1/3" ideal clean cut and 2/5" maximum severance cut under 110/120V. Engine Power : Electric (AC)★ DUAL VOLTAGE INPUT: Automatic Dual Voltage / Dual Frequency (110/120 V 220/240 V 50/60Hz)..
  • ★ BUY WITH CONFIDENCE: We offer 30 days refund and a 3-YEARS Limited Warranty: include 1 Year NEW Replacement Warranty. ★ US BASED CUSTOMER CARE & SUPPORT TEAM: please feel free to contact us by phone or email, we always stand Back on Our Products. Please submit the registration form on our website..
  • ★ THE COMPATIBLE CONSUMABLES SETS for this BROWN Color LT5000D Plasma Cutter are "LCS22" or "LCS33". Please search "Lotos LCS22" or "Lotos LCS33".
  • ★ It CANNOT compatible with Lotos LCOn20, LCON40 or LCON90 Consumables Sets or any other third part consumables set. ★ PACKAGE INCLUDES: Power supply, Plasma cutting torch, ground clamp, Pr....
Check Stock

PrimeWeld Plasma Cutting Table with Replaceable Slats, Plasma Cutter Table, Cutting Equipment, 32" H x 21" W x 30" L

  • Plasma Cutting Solution - The PrimeWeld Plasma Cutting Table offers you an industrial solution to a problem that most face when trying to cut material with their plasma cutter or gas torch. Using this table you can lay your workpiece over the support slats and make cuts with your plasma cutter or gas torch and not worry about what to use to support the back side of the material..
  • Sturdy, Carbon Steel Construction - The 250 pound capacity allows you to plasma cut or weld heavy plate steel. As an extra safety feature, the slag catch tray helps you to not worry about pieces falling to the floor..
  • Work At The Right Height - This slatted-top, steel cutting table is the place to support your workpiece while plasma cutting or welding. The dimensions are 32"H x 21"W x 30" L and are designed to let you cut and work at the perfect height..
  • Replaceable Slats - The PrimeWeld Plasma Cutting Table comes with 23 replaceable slats. The slat support spacing allows arcs and sparks from your welder or plasma cutter to penetrate the steel..
Check Stock

WeldingStop 40pcs SL60 Electrode 9-8215 Tips 9-8211 Nozzle 80A for Thermal Dynamics SL60 SL100 Torch CutMaster 52 82 152 102 Plasma Cutter Consumables

  • ✓CutMaster Cutter—— The plasma cutter spare parts kit are fitting in Thermal Dynamics CutMaster 52 / 82 Plasma Cutter SL60 Plasma Cutting.
  • The plasma consumables also can fit Thermal Dynamics CutMaster 102 / 152 Plasma Cutter with SL100 Plasma Torch.
  • ✓For Use With Torch—— These electrodes and tips are fitting in plasma Torches 2CZF1 and 2CZF2.
  • ✓Package Including—— 20pcs SL60 electrodes 9-8215 and 20pcs SL60 standoff tips 9-8211 80A Nozzle WS OEMed.
  • ✓Plasma Cutting Current—— These plasma consumables can be uesd within 80A plasma cutting.
  • ✓Replacement Parts—— These electrodes and tips are replacement parts that made by WeldingStop, and not original.
Check Stock