Best Ubiquiti Instant Poe Converter

Ubiquiti Networks UniFi Cloud Key Gen2 (UCK-G2)

Ubiquiti Networks UniFi Cloud Key Gen2 Powerful Remote Cloud Management.
The UniFi Cloud Key Gen2 from Ubiquiti Networks allows you to configure your network quickly with a Bluetooth setup from the UniFi mobile applications..
The UniFi Cloud Key Gen2 features a 10/100/1000 Mb/s Gigabit Ethernet port, which supports 802.3af PoE..
SDN Controller Multi-Site Network Management.

4 PoE+ Ports and 2 Ethernet Uplink Ports at 10/100Mbps each, making network setups easier and more convenient..
Hi-PoE at port 1 providing up to 60W single port, PoE+ at port 2-4 up to 30W per port, which is better than normal PoE port that can only provide 15. 4W per port. 60W Max Total Power (includes 60W DC adapter)..
Extend function extending max PoE transmission distance from 100 meters to 250 meters.
PD detection will automatically detect and provide required power for your PoE devices **This is a 48V active PoE, NOT compatible with Ubiquiti devices which require 24V Passive PoE. **.
100% Satisfaction – 30-day Money-Back with 1 Year Warranty and Lifetime Tech Support.

【PoE & IP OVER COAX CONVERTER】LINOVISION’s POE IP Over Coax converter can be used to upgrade analog system to IP surveillance system while using existing coaxial cable. Compatible with RG59, RG6 cables. Supports POE standards 802.3af (PoE) and 802.3at (PoE+). EOC Receiver should be powered by POE switch or POE injector while Transmitter should be connected with POE devices or NON-POE devices.
【LONG REACH POE TRANSMISSION】Up to 100Mbps in 300m (1000ft) RG59 cable transmission, max 1000m (3000ft) distance in 10Mbps, working with CCA/CCU RG59/RG6 cable. Support POE power transmission with load capacity 11W over 300m (1000ft) transmission, working with POE IP camera, VoIP phone, POE WiFi AP.
【INDUSTRIAL DESIGN WITH BUILT-IN HEAT SINK】Industrial design, with built-in heat sink, ensure super reliability and hassle free transmission. Indoor use ONLY. Plug-and-play, configuration free, makes installation simplest. Small design (3.1"x2.0"x0.9") and light weight.
【POINT TO POINT CONNECTION ONLY】Act as MoCA (Multimedia over Coax) in point-to-point connection, transmit video/audio/data/control signal over coaxial cable.
【WORRY FREE】1 year warranty, US local technical support + Global after-hour support..

8 PoE+ Gigabit Ports and 2 Gigabit Ethernet Uplink Ports, making network setups easier and more convenient..
PoE+ provide up to 30W per port, 802.3 af/at, 96 Watts Max Total Power. This is a 48V active PoE, NOT compatible with Ubiquiti devices which require 24V Passive PoE..
BV-Tech Premium Series, Made in Taiwan, NDAA Compliant..
100% Satisfaction Guarantee – 30-day Money-Back Guarantee with 1 Year Warranty and Lifetime Tech Support..

Ubiquiti UniFi Switch PoE US-48-500W Switch Managed PoE+ Layer 2 Gigabit with SFP 500 Watts - 70 Gbps.
The UniFi Switch delivers the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss. Total non-blocking throughput: up to 70 Gbps for 48-port models..
Each switch port offers custom settings: port name, PoE, network/VLAN configuration, and operation mode (switching, mirroring, or aggregate) - as well as 802.1X Authentication and Radius VLAN support..
Two SFP ports support uplinks of up to 1 Gbps. For high-capacity uplinks, each 48-port model includes two SFP+ ports for uplinks of up to 10 Gbps..
The UniFi Switch features auto-sensing IEEE 802.3af/at PoE to power multiple devices on the network.

Ubiquiti EdgeSwitch ES-24-250W 24-Port Managed PoE+ Gigabit Switch with SFP 250-Watt 26 Gbps.
The 24 RJ45 Gigabit ports, the EdgeSwitch delivers robust performance, PoE+ support and intelligent switching for growing networks.
The EdgeSwitch supports an extensive suite of advanced Layer-2 switching features and protocols, and also provides Layer-3 routing capability..
Two SFP ports support uplinks of up to 1 Gbps. For high-capacity uplinks, each 48-port model includes two SFP+ ports for uplinks of up to 10 Gbps..
The EdgeSwitch features auto-sensing IEEE 802.3af/at and 24V passive PoE to power multiple devices on the network..

Ubiquiti EdgeSwitch 48 Port ES-48-750W Managed PoE+ Gigabit Switch with SFP non-blocking throughput 70 Gbps.
The EdgeSwitch delivers robust performance, PoE+ support and intelligent switching for growing networks..
The EdgeSwitch features auto-sensing IEEE 802.3af/at and 24V passive PoE to power multiple devices on the network..
Two SFP ports support uplinks of up to 1 Gbps. For high-capacity uplinks, each 48-port model includes two SFP+ ports for uplinks of up to 10 Gbps..
The EdgeSwitch supports an extensive suite of advanced Layer-2 switching features and protocols, and also provides Layer-3 routing capability..

【24 Gigabit PoE+ Ports for Powerful Connectivity】Equipped with 24 PoE+ (802.3af/at) 10/100/1000Mbps RJ45 ports, providing up to 30W per port with a total PoE power budget of 250W for a seamless network experience..
【High-Speed Uplinks & SFP Expansion】Features 2 Gigabit Ethernet Uplink ports and 2 SFP Uplink ports (100/1000 Base-X) for high-speed connections, enhancing overall network performance and flexibility..
【Wide Compatibility with 48V Active PoE】This 48V active PoE switch is designed for compatibility with a broad range of devices, but please note that it is NOT compatible with Ubiquiti devices that require 24V Passive PoE..
【Reliable BV-Tech Premium Series】Trust in the quality and performance of our Made-in-Taiwan, NDAA Compliant PoE Switch for your networking needs..
【100% Satisfaction Guarantee】Our 30-day Money-Back Guarantee and 1-Year Warranty ensure your peace of mind when choosing our premium, Taiwan-made, NDAA Compliant PoE Switch..

For Pi 4 and 3 B+: This PoE HAT can be used to deliver clean and reliable power to the raspberry pi 3 model B+ and raspberry pi 4 model B (not included)..
Intelligent Temperature Control: the 25mm×25mm brushless cooling fan will turn automatically when the temperature of the processor is high..
Smaller Size: Save more space than the official HAT, can be held in the most case for Raspberry Pi.We recently released a new version of PoE HAT with fan, which can support 48V non-standard switches, please search B09MCGFX12.
NOTE: The network switch or power sourcing equipment (PSE) is needed to supply the PoE signal, and they must be compliant with the IEEE 802.3af or 802.3at PoE standard, particularly section 33.4.1 with regards to PSE electrical isolation of the leads. For the non-isolated switch, such as some Ubiquiti switches can not provide proper isolation, they can only work with CAT 5E and CAT 6E network cable..