Best Twin screw Food Extruder

Sovol SV01 Upgraded 3D Printer 95% Pre-Assembled with Direct Drive Extruder Meanwell Power Supply Glass Plate & Built-in Thermal Runaway Protection 280x240x300mm

★ Direct Drive Extruder ★: Sovol SV01 features with direct drive extruder and dual Z lead screw, greatly increase its printing stability and....
★ Meanwell Power Supply ★: Built-in branded Meanwell power supply ensures stable and sufficient power, heat up the hotbed and nozzle fast.....
★ Removable Glass Plate ★: This 3D printer comes with a flat glass plate on the regular heated bed, greatly resolving warped bed issues. No matter....
★ Semi-Assembled Kits ★: Sovol Direct Drive Extruder 3D Printer comes with several partially assembled kits, just only take you at most 30 minutes....
★ Sovol Support ★: All of our products are shipped to the consumer directly from the manufacturer, we provide lifetime technical assistance.....

Check Stock

Haldis 3D Dual Drive Gear Extruder for 3D Printer MK8 V6 CR10 1.75mm TPU/TPE Flexible Filament Without Motor (DDB Left)

1.【Transparent Design】: Transparent and cool design, double gear extruder, when working, you can watch the printing filament go through to see how it works. The transparent case is very practical and looks beautiful..
2.【Dual Gear Extrusion】: Two stainless steel wheels grab the filament from both sides, high extrusion force, ensure smooth feeding and provide fast retraction, after a lot of trial and error improvements, we successfully improved the gear bite problem, improved The durability and reliability of the gears reduce the consumption of our gears and extend their service life..
3.【Adjustable Pressure Spring】: Easily adjust the clamping force of the filament, improved adjustment thumb screw, more comfortable adjustment and more convenient to use..
4.【High Quality Material】: Transparent hard plastic shell and high quality metal extrusion wheel parts, the transparent material looks very beautiful and beautiful. Lightweight: only 70 grams. It reduces the stress on the printer and is extremely easy to assemble..
5.【Widely Compatible】: Compatible with most DIY ....

Check Stock

Upgrade 3D Printer Accessories with All Metal Extruder Feeder, Capricorn Bowden Tubing, Pneumatic Couplers, Bed-Level Springs for Creality Ender 3/Ender 3 Pro/Ender 5 Pro/Ender 5 Plus Ender 3 Upgrades

3D Printer Extruder – Instantly provide improved print quality and reduce filament slipping by firmly grasping the filament between two threaded wheels locked together. No more skipped steps when extruding at high speeds or after retractions. Print faster with this superior design, which is able to feed much more filament into the hotend in the same period of time than stock plastic extruders..
100% Original Capricorn XS Bowden Tube for 1.75mm filament – Capricorn ptfe tube is regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead directly to the hotend with as little room for error as possible between the extruder and the hotend. It is rated for withstanding the highest temperature in the market which is perfect for printing filaments such as PLA, PETG, ABS, Nylon. Fits for 1.75mm 3d printer Filament..
Creality Die Springs – Those springs are extra firm and help to hold the bed level for longer while being more resistant against wearing out and loosing compression. Level the bed once and it should hold for more prints with these high performance stiff springs. PC4-M6 & PC4-M10 pneumatic fittings are also included for replacement use on any stock creality hotends..

Check Stock

Redrex Ender 3 All Metal Bowden Extruder Tension Adjustable with Tube and Stiff Bed-Leveling Springs for Ender 3,Ender 5,CR10 Series 3D Printers

All Metal Extruder Replacement for Ender 3 Ender 5 CR10 Series:This durable aluminum extruder frame works more stable than plastic parts..
Adjustable Extrusion Spring Tension Design: The extrusion spring tension could be adjusted by tighten the screw..
Upgraded Stiff Bed Leveling Springs:It provides stronger tension and longer sevice life than the stock ones..
High Quality Bowden Tube :It was made of highly purified PTFE(Poly Tetra Fluoro Ethylene) material,it feeds the filament smoothly..
Recommend filament materials:PLA/ABS/Wood/Hips/Flexible/PTEG,40 Teeth drive gear feeds the 1.75mm filament very smoothy..

Check Stock

Redrex Dual Gear Extruder Metal Drive Feeder Upgrade Kit for Creality Ender 3 V2 Ender 3 Pro CR10 Series 3D Printer TPU Filament Supported

【Double Gear Extrusion Mechanism】:The filament is gripped by the dual drive much more firmly with less deformation, so it doesn't jam as much in....
【Upgraded Idler Gear Design】This idler gear is upgraded with two washers on both sides, so the sharp gear will NOT ride against the bottom of the....
【Spring Adjustable Extruder】The extrusion spring tension could be adjusted by tighten the screw,which greatly improves the printing accuracy and....
【Application】:This all metal dual drive extruder is compatible with Ender 3 V2,Ender 3 Pro,Ender 3,Ender 5 Pro,CR10 S series 3D printer..
【Kindly Reminder】:Please calibrate the E-steps from 100 to 139..

Check Stock

Iverntech Upgraded Dual Drive Extruder for CR10,Ender 3 Series, Anycubic Mega S, Tevo Tornado, Wanhao D9, Anet A8 E10 and Prusa I3 DIY 3D Printer

Dual-drive Bowden extruder has an internal transmission ratio of 3: 1 and high accuracy, and we recommend E-steps:385.
Adjustable Tension: The thumbscrew tensioner allows the user to fine-tune the pressure exerted by the drive gears onto the filament.
Notification: Do not adjust tension of hand twist screw too tight when you print soft filament, otherwise the filament wiring will be winding on the wheel. Manually adjust to a suitable tension for your 3D printer.
Suitable for most 3D printers and filaments.
Packing with: 1x Bowden Extruder, 1 x Universal Stepper Motor Bracket.

Check Stock

Monoprice MP10 3D Printer - Black with 300 x 300 mm Magnetic Heated Build Plate Resume Printing Function Assisted Leveling and Touch Screen

Easily Accessible Magnetic Extruder: The removable magnetic carriage provides an easy launch point for changing to an extruder system of your choice.....
2 Screw Hotend Removal: Access to your hotend is easy, making quick changes to the tool head possible. Switch from a 0.4mm to a 0.6mm nozzle without....
Heated, Removable, & Flexible Print Bed: Capable of easily hitting 100 degree C, this large 300 x 300 print bed makes removing prints easier than....
Assisted Bed Level Sensor: Leveling is easy with the level sensor. It will detect differences in the bed, which allows you to set an accurate Z offset....
Dual Y Gantry: The dual Y gantry provides a stable base for the printbed, minimizing wobble found in single Y gantry models of 3D printers. This....

Check Stock

ELEGOO Neptune 3 Pro FDM 3D Printer with Auto Bed Leveling, Dual-Gear Direct Extruder, Dual Lead Screw Drive, Removable Capacitive Screen, 225 x 225 x 280 mm³ Large Printing Size

...en by silent stepper motors for quieter and more precise movement during printing, which reduces the noise as low as 47-48dB. The easy-to-setup printer comes with the main components pre-assembled, as well as a complete tool kit for quick installation..
【Dual-Gear Direct Extruder】The new dual-gear direct drive extruder is made of SUS303 high-quality stainless steel with a 3:1 reduction ratio and stronger extrusion force for smoother filament feeding and more stable & accurate printing, which greatly reduces nozzle clogging and under-extrusion issues, printing effect is better than Bowden extruder. Compatible with multiple filaments such as PLA, TPU, PETG, and ABS..
【Nozzle Kit for Better Printing Effect】The nozzle kit contains a TC4 titanium alloy throat pipe, an aluminum alloy flat heat sink structure, and a brass nozzle.The widened aluminum heat sink paired with the front close-fitting efficient cooling fan for a better heat dissipation effect and lower the temperature of the throat pipe, thereby reducing the possibility of nozzle clogging..
【Smarter Printing Experience】Auto mesh bed leveling adopts a non-....

Check Stock

5Aplusreprap Upgraded Dual Gear Extruder Single Connector for Creality Ender 3 CR10 / Pro CR-10S 3D Printer 1.75mm Filament (2 x Extra Gears), Right Hand

Package Include: Single connector upgraded dual gear extruder right-handed 1 Set - extruder aluminum block DIY kit with 4pcs quality stainless steel gears.
Main Material Instruction: Material for extruder: Aluminum Alloy . Material for the gear in extruder kit : Stainless Steel. For filament: 1.75mm.
Advantages: This is an upgraded version of CR10 extruder. A newly added extrusion wheel makes the filament feed more stable. The design of the double-concave gear also reduces the embossing of the consumables by the extrusion wheel..
Features: The mould steel spring is very rigid, strong in pressure and very durable..
Tips: For most Ender/CR Series 3D Printers, please choose the right-handed extruder..

Check Stock