Best Turbocharger Turbine Inlet Gasket

BLACKHORSE-RACING Turbo Charger Oil Drain Return Line Oil Feed Complete Kit T3 T4 T04E T60 T61 T70 Silver

  • Will work with T3 T3 T04E T61 T601 T70 turbo.
  • Comes with 17" braided oil drain return line (comes with AN10(-10AN) fittings for return line kit,oil line covered with high quality woven Stainless steel for racing and aggressive look.).
  • Circulate oil to the oil pan (only for metal plates).
  • It helps to circulate oil from the turbocharger to the oil sump. The kit provides an anodized appearance that provides optimum cooling performance on a turbocharger for long life.And special designed inlet adapter limits oil flow ,effectively prevent blown oil seal caused by excessive oil pressure.
  • Comes with gasket,screws/washer,all fitting are made of high quality aluminum.No Instruction Included, Professional Installation is Recommended!.
Check Stock

Turbo Turbocharger 13900-62D51 Snowmobiles ATV RHB31 VZ21 Fits for Mini for Suzuki for Small Engine with YA1/F6AT 500-600ccm, for Motorcycle Water and Oil Cooled

  • ★★100% brand new, very good quality.Careful manufacturing improves turbine power..
  • ★ This turbine blade of made rare metal Ni, which has the advantages of good working blade under high temperature environment, large power and long service life..
  • ★This turbocharger volute produced made of high quality silicon molybdenum, which can not creep under high temperature and prolong its service life..
  • ★Through the comprehensive and high-precision static and dynamic balance detection technology, the use time and reliability are increased, and the car owners have no worries.
  • ★ This turbocharger is built to match the performance of original equipment for specific vehicles.Before purchasing a high-quality turbocharger, please check the picture carefully. The necessary accessories for the installation are already in place and easy to install. It is recommended to find a professional master to install..
Check Stock

Remanufactured Supercharger Turbocharger Roots Car Auto Kompressor Supercharger Compresspr blower booster Kompressor for 0.8-2.0L AISIN AMR500

  • Mechanical car auto compressor kompressor turbocharger turbine, mini roots supercharger blower booster for 0.8-2.0L AMR500..
  • AMR500 Turbocharger can be reduced 3%-10% in fuel consumption..
  • AMR500 Supercharger can be increased 10% - 30% in engine power..
  • The direction of rotation of the turbocharger is the same as that of the engine..
  • NOTE:Installation Manual Is NOT Included ,Professional Installation Is Highly Recommended.Note that the supercharger is a v pulley (VPK), Before installation, the gear oil must be filled with about 90ml, and the oil type is 85w-90, GL-5..
Check Stock

TBVECHI Turbocharger, Supercharger AMR500 Turbocharger Mini Roots Supercharger Blower Booster 0.8-2.0L

  • ☑【Specification】Car Maker: Universal. Material Type: Steel Aluminum. Type: Supercharger. Displacement: 0.8-2.0L. Lifting power: 10-30% increase in engine power. Fitment Type: Direct Replacement..
  • ☑【Wide Usage】This is a universal supercharger, any model, 2.0 and below displacement, as long as there is space to install..
  • ☑【AMR500 Turbocharger】Mechanical car auto compressor kompressor turbocharger turbine mini roots supercharger blower booster for 0.8-2.0L AMR500..
  • ☑【Package Includes】1 X AMR500 Turbocharger..
  • ☑【Guaranteed】This item will ship from USA, delivery time need about 5-8 days. If there is any questions please feel free to contact with us, email the contact information that comes with the package, our experienced TBVECHI customer service team will response in 24 hours. You Deserve the Best After-sales Service..
Check Stock

Cen-Tec Systems 93070 Central Vacuum Kit with Switch Control Hose, 35 Ft, Silver

  • The 93048 is compatible with air turbine nozzles and all major brands of central vacuums including Beam, Electrolux, Eureka, Vacuflo, Vacumaid, MD, Cyclovac, Canavac, Hayden, Star Power, and Imperium. The hose is compatible with air turbine nozzles and 1.25 inches accessories of all types.
  • The 93070 permits remote activation of the central vacuum through the low volt contacts exposed in the inlet valve opening. It does not connect to 120 V power permitting the use of an electric power.
  • The lightweight highly flexible hose is made in the usa and is designed to power on and off the central vacuum power unit through industry standard pin jack inlet valves. The hose will work with standard accessories and any of the industry air turbine nozzles. It is not for use with an electric power nozzle.
  • The package comes with two floor nozzles. One is a multi-surface nozzle which works equally well on carpet and hard floor surfaces, while the other is a usa-made hard floor brush.
  • To confirm this package will work with your inlet valves you can confirm there are two small contact points located in your inlet valve on either the top half or bottom half of the inlet valve opening.
Check Stock

Bouclier Thermique Turbo - Turbocharger Heat Shield Single Titanium Turbo Heat Shield Blanket Barrier Turbo Charger Cover forT3/T25/T28/GT25/GT28/GT30/GT32/GT35/GT37/CT26 Small and Medium or Other T3

  • Compatible with many vehicles, suitable forT3/ T25/ T28/ GT25/ GT28/ GT30/ GT32/ GT35/ GT37/ CT26 small and medium turbochargers or any other T3 turbocharger. - turbo heat shield td05.
  • The turbocharger shield is specifically designed to reduce the amount of radiant heat generated by the turbocharger. - coperta turbo.
  • It reduces turbo lag and helps increase the time of the turbine shaft. - bouclier thermique turbo.
  • It also significantly cuts down the hood temperature for protecting major engine components..
  • Beautiful appearance, fast and convenient disassembly and assembly..
Check Stock

667-203 55565353 Turbo Charger Turbocharger Kit Compatible with 2011-2020 Chevy Cruze Sonic Trax Buick Encore 16 Cruze Limited 1.4L 1.4T Engines 55565355

  • Replacement Turbocharger - The turbocharger helps the vehicle's engine to generate more power and obtain higher acceleration to the vehicle. It funnels the exhaust gases to spin the turbine wheel along with the compressor wheel at a high speed which feeds large amount of air to the combustion chamber than its normal intake of the vehicle's engine. This is applicable to your encore, cruze, sonic and trax vehicles..
  • Compatible with Buick and Chevy Vehicles with 1.4L, 1.4T Engines - 2013, 2014, 2015, 2016, 2017, 2018, 2019 Encore | 2011, 2012, 2013, 2014, 2015 Cruze | 2016 Cruze Limited | 2012-2019 Sonic | 2013-2019 Trax |. The turbocharger can easily be located in front of the exhaust manifold inside the engine bay. Printed installation instructions are included with the kit..
  • Replaces Part# 55565353, 667-203, 667 203, 40-80745S4, 25201063, 860156, 847-1446, 781504-5004S, 781504-5001S, 781504-0001, 781504-0002, 781504-0004, 7815040005, 7815040006, 7815040007, 7815045001S, 781504-5004, 14030485-101, 14030485-102, 14030485-103, MGT1446V, GT1446V, 667203 commonly found on popular Encore, Cruze, Cruze Limited, Sonic, Trax models including years 11, 12, 13, 14, 15, 16, 17, 18, 19..
  • OEM Fit, Quality, Finish - While this is not a genuine OEM part, it is a d....
Check Stock

Part# 1831383C92 GTP38 Turbo 22PSI Wastegate Actuator For 1999-2003 Ford F-250 F-350 with Powerstroke 7.3L Engine 1831383C94

  • ...m. The spring holds the wastegate shut until the boost pressure reaches a set level, and then opens, allowing the gas to escape and reducing the boost pressure..
  • This controls the speed of the turbine, preventing it from over-speeding, and regulating the speed of the compressor. Ultimately, this helps to protect the turbocharger from unnecessary wear and tear, by capping the maximum boost pressure of the turbo at a safe level..
  • This wastegate actuator is a direct replacement for Ford Powerstroke 7.3L 99.5-03 GTP38 turbocharger, the rod of Actuator is adjustable. Ford F350 Powerstroke 1999 - 2003 year 275HP Power Stroke, Ford F250 Powerstroke 1999 - 2003 year 275HP Power Stroke..
  • Customers can find the product you need accurately according to the OE number. OEM replace part number: 702011-0009, 702011-0011, 702012-0004, 702012-0005, 702012-0010, 702012-0012, 702012-5006S, 702012-5010S, 702012-9006, 702012-9010, 706447-9003, 1831383C92, 1831450C94, 1831450C91, 1831452C91, 1831383C93, 1831383C94, F81Z6K682BARM, F81Z6K682CARM. This wastegate actuator fits 99 00 01 02 03 years Ford cars..
  • As with all components, things can go wrong with your wastegate actuator. Over time, the pressure and heat will start to take its toll, which can weaken the spring. This can....
Check Stock

Turbo Rebuild kit for Holset HX35 HX35W HY35 HX40 HE341 HE351 HE351CW

  • These turbochargers were popular For Cummins turbodiesels (will not fit VE, H1C & H1E turbos).
  • Both type journal bearing included – the HX35/HY35/HX35W/HX40 style and the HE351/HE351CW/HE341 grooved style bearing. Upgrade Step Gap Turbine Seal....
  • It greatly reduces the build up of power robbing deposits due to oil leaking through the seal into the turbine housing and on the turbine wheel..
  • If your turbo is an HX40 you may need two turbine seals because some HX40 turbine shafts utilized two turbine end seals. This kit contains two turbine....
  • Nice quality kit. Complete gasket set included. Gaskets are high quality fiber material with controlled-swell styrene butadiene rubber binder and can....
Check Stock