Best Turbo Lock Nuts

MTD 712-0417A Hex Flange Nut 5/8-18- 3 Pack

Known as Hex Flange Nuts, Flange Lock Nuts, Spindle Nuts, Blade Lock Nuts, this nuts are used to secure a blade to the spindle.
Work with MTD, Craftsman, Troy Bilt lawn mowers & tractors. Had been tested and confirmed to work with LT1040 LT1042 LT1046 LTX1040 mower deck spindles.
Replace the part# 712-0417, 712-0417A, 912-0417, 912-0417A, 753-05549, 112-0330.

Check Stock

304 Stainless Steel Lock Nut Assortment 170 Pcs, M3 M4 M5 M6 M8 M10 M12 Nylon Insert Locknut

ALL-AROUND and MULTIFACETED ASSORTMENT KIT from Top Grade 304 stainless steel nylon lock nuts in 7 common sizes for general, convenient, and handy use making it highly ideal for use professionals and DIYers. This kit is one of the few in the market with high-quality and better quantity making it a cost-efficient choice..
Made with INDUSTRIAL-STRENGTH NYLON COLLAR capable enough to replace lock washers and prevent bolts from being exposed and coming out providing better security and firm hold. Performs better compared to lock washers as it is made out of non-corrosive material..
SOLID and STURDY POLYMER-INSERT LOCK NUTS are highly resistant against turning, preventing the lock nuts from weakening and loosening under vibration and torque which reduces the strength of hold. Guaranteed to stay intact and in firm hold making virtually indestructible..
RUGGED and TOUGH PLASTIC COMPARTMENT as carrying case allowing the user to neatly organize the lock nuts according to size. It also works as a convenient storage to be kept in a garage, workbench, or on the go job sites. The transparency of the box allows the user to check the quantity and conduct inventory without opening the box..
BETTER QUANTITY ASSORTMENT. Composed of M3 (45 pieces), M4 (35 pieces), M5 ....

Check Stock

VIGRUE 450pcs M3 M4 M5 M6 M8 Acorn Hex Cap Nuts and Nylon Lock Nut and Serrated Flange Hex Lock Nuts Assortment Kit, 304 Stainless Steel, Bright Finish

✅Nut Type: This nut set totals 450pcs, 137pcs Acorn Hex Cap Nuts, 170pcs Nylon Lock Nut, 140pcs Flange Hex Lock Nuts, 5 Nut Sizes: M3 M4 M6 M6 M8, great fasteners for professional users and DIY projects..
✅HOLD Screws Firmly: Nylon Lock Nut with a nylon insert inside, the lock nuts greatly reduce loosening vibrations and torque. Flange Nut serves to distribute the pressure of the Nut over the part being secured, reducing the chance of damage to the part. The Acorn cap nut is a hex with an enclosed dome and it is partially internally threaded, can play a good role in decoration and to prevent being threaded scrape..
✅High-Quality Stainless Steel: These Nuts Assortment Kit are quality 304 stainless steel which is high hardness and high strength, which provides excellent rust resistance, will not be damaged under high pressure, and can be used for a long time. Through heat treatment and strict quality control, the surface of our nuts is smooth and bright..
✅Transparent Storage Box: Acorn Hex Cap Nuts, Nylon Lock Nut, Flange Hex Lock Nuts assortment kit come with a convenient storage case, which is transparent and many compartments included, easy for your store and carry. And every size, neatly lies in a compartment individually..

Check Stock

LUCKEG Homebrew Pin Lock Disconnect Pin Lock MFL Quick Disconnect with Swivel Nut and Free Hose Clamp for Draft Beer Keg System

1.Include: Pin Lock Gas Disconnect MFL type with 5/16" swivel nuts (3 pcs), Pin Lock Liquid Disconnect MFL type with 3/16" swivel nuts (3 pcs), Worm....
2.Material: PBT Material for Pin Lock Quick Disconnect and Stainless Steel for Swivel Nuts and Worm Clamps.
3.Easy Connect: The Gray Base Pin Lock Keg Disconnect connect 5/16" Gas Line, and the Black Base Pin Lock Keg Disconnect connect 3/16" Beer Line.
4.Use: The Pin Lock MFL Disconnects used for Cornelius Style Pin Lock Keg, Works for Beer or Soda.
5.Guarantee: Quality Guarantee, any problem for Pin Lock Disconnect, Money Back or Replacement Free..

Check Stock

Keg Disconnect Ball Lock MFL Ball Lock Fittings Keg Connectors – Keg Coupler Stainless Ball Lock Keg Fittings 12-Piece

DISPENSE YOUR FAVORITE BEVERAGES: Use the G. Francis Ball Lock Keg Fitting Ball Locks 12-Piece Ball Lock Quick Disconnect Set with Liquid & Gas Disconnects, Swivel Nuts, & Hose Clamps to ferment and dispense craft cocktails, soda, and other beverages from your existing keg.
USE YOUR KEG: Each of the ball lock keg connectors (fittings) have an approximate 2.2-inch height and 1.3-inch outside diameter (5.6cm x 3.3cm) and is compatible with ball lock Cornelius (Corny) kegs and keg couple adapters for homebrewing.
Hose clamps have 0.2-inch to 0.5-inch (6-12mm) diameter while the barbed swivel nuts have 5/16-inch outside diameter (OD) fitted for 1/4-inch or 3/16-inch inside diameter (ID) hoses on your 3, 5, or 10 gallon keg.
BUILT TO LAST: Keg ball lock quick disconnects and hose clamp wings constructed from ABS plastic that resists rust and corrosion.
Swivel nuts and clamps constructed from food-grade stainless steel for maximum strength and longevity.
INSTALL EASILY: Tighten the swivel nut connecting the flare fitting before use.
Ensure correct fittings are installed on input and output posts – Light gray disconnect for gas inlet and black disconnect for fluid outlet.

Check Stock

BLACKHORSE-RACING 3 Inch 76mm Stainless Steel V Band Bolt Clamp with 2 Male Female Flanges for Turbo Pipes SS V-Band Flange Kit

▲ 3 INCH STAINLESS STEEL EXHAUST CLAMP KIT – Complete V-band kit is ideal for performance exhaust systems, catback exhausts, turbo back exhausts and more..
▲ COMPLETE 3 PIECE KIT – This complete 3inch Vband kit includes 1x 3″ V-Band clamp which is designed to accommodate the 2x stainless steel 3″ Vband flanges.
1 male flange and 1 female flange. This allows for the flanges to properly align during installation to insure a leak free seal..
▲ DESIGNED FOR 3″ EXHAUST PIPES – This kit is specifically designed for 3″ exhaust pipes. The flanges feature a recessed opening which allows for a 3″ exhaust to easily slip inside the flange, providing a perfect overlap seam for welding..
▲ PERFECT FOR TURBO AND HIGH HORSEPOWER VEHICLES – If you’re making a catback exhaust, turbo back exhaust, mid pipe, or up pipe for your car, truck, or other vehicle this V-band kit is ideal for connecting different pipe sections. Conventional exhaust flanges multiple nuts, bolts, washers and a gasket. A V-band kit eliminates all of these and allows for a connection with a single nut..
▲ EASY ON, EASY OFF – A V-band kit allows you to connect or disconnect sections of your exhaust by removing a single nut. Conventionally exhaust flanges involve multiple ....

Check Stock

5/16"-18 Inch Lock Nut (100 Pack) Stainless Steel Finish Hex, 304 18-8 Stainless Steel with Nylon Insert, by Bolt Dropper

HIGH QUALITY STAINLESS: These Lock Nuts are 100% 18-8 (304) Stainless Steel which is one of the highest forms of corrosion resistant metals, making it last longer than other Nuts on the market today..
WILL NOT COME LOOSE: With a nylon insert, these lock nuts greatly reduce loosening under vibrations and torque.
LOCKNUTS THAT YOU CAN DEPEND ON: Our hex lock nuts are very strong and are great for both indoor and outdoor use. This stainless .
is superior to regular steel and provides excellent rust resistance..
GREAT TO KEEP AROUND: Bolt Dropper hex nuts are great to have around for use in wood and wet environments. Bolt Dropper Hex Nuts are the highest quality available on the market and we stand by our claim 100%. They are strong, corrosion resistant and will support all of your projects..
LIFETIME GUARANTEE: We are so confident that our product is the best on the market that we offer a NO HASSLE LIFETIME GUARANTEE..

Check Stock

POROHOM 12 PCS Trampoline Screws, Long Screw Trampoline Replacement Parts,Anti-Loose Trampoline Bolts and Nuts,Trampoline Accessories Trampoline Stability Tool- 3 in

Application: The trampoline screws are compatible with many different trampoline brands. The installation of long screws on the trampoline can make the trampoline more stable and not easy to shake..
Package Includes: 12 x Trampoline Screws, 1 x open wrench. Important note, Nylon lock nuts are used in our trampoline screws kits, and Nylon Lock Nuts Use the matching wrench to tool to screw in..
Nylon Insert Lock Nuts are also known as stop nuts. Lock nuts are used for fastening to a bolt when mechanically joining materials together. The bolt threads into the nylon material are located at the top of the nut. The purpose of the nylon insert is to prevent backing off or loosening from vibration..
Compared with the bolt heads of other brands of trampoline screws, the square shoulder underneath the rounded head is unique because this design can resist rotation when the nut is removed or tightened..
Wide Range Of Uses:The 12-piece bolt and nut set can be widely used in trampolines, cribs, bunk beds, chairs, cabinets, workbenches and other furniture.
it can also be well connected to wood, headboards and cabinets..

Check Stock

Kemimoto Maverick X3 4-Seater Hard Roof compatible with 2017 2018 2019 2020 2021 Can Am Maverick X3 Max Replace 4 Doors OEM # 715003750

Maverick X3 4 seater roof is compatible 2017-2023 Can Am Maverick X3 Max all models, such as X3 max rc turbo r, X3 max ds turbo, X3 max rs turbo r..
X3 Max Hard Roof is easy to install, installation instruction is included, directly bolt-on design, replace OEM part Number 715003750.
Maverick x3 roof tops are designed for 4 seater models only, so you will receive one front x3 roof panel, one rear x3 roof panel, and comes with quick-release 1/4 turn fasteners and straps, bolts, and nuts..
X3 max Turbo Roof will compatible with all kinds of X3 Windshield and provides excellent downhill visibility. We have another listing for the X3 Windshield..
X3 max roof 4 seaters is made of High-quality impact-resistant injected polypropylene for long-term use, superior design is just the same as the original x3 roof..

Check Stock