Best Turbo Kit Chevy

GSL392 Inline Fuel Pump & 58 PSI Fuel Filter Regulator 58 PSI LS Swap Fuel Pump EFI Conversion Fuel Filter Pressure Regulator 255LPH High Pressure External Pump 6AN Fittings 400-939 GSL392-400-939

...ration of the engine, and extending the engine service lifespan..
GSL392 HIGH PRESSURE FUEL PUMP - LS Inline fuel pump is designed to start higher-pressure fuel racing or performance-purpose vehicles stably and safely, which can help to meet the requirements of most modern turbocharging applications. At 80 PSI, Yinlowa 255 lph high pressure fuel pump can flow around 132 liters (35 gallons) per hour.
At that same 80 PSI the equivalent HP (high pressure) fuel pump can flow over 210 liters (50 gallons) per hour.
FITMENTS - GSL392-400-939 Inline Fuel Pump fits EFI applications including turbo and supercharged, variety of pressures and flows available, including high pressure performance.
58 PSI Fuel Pressure Regulator AN-6 Fittings for LS Swap EFI Conversion is compatible with Chevy 1999-2014 V8 5.3L/325 Chevy small block Gen III/IV (LS-based engines).
Chevy 1999-2014 V8 4.8L/294 Chevy small block Gen III/IV (LS-based engines).
Chevy 1999-2014 V8 6.0L/364 Chevy small block Gen III/IV (LS-based engines)..
REPLACE PART # - Fuel Filter Regulator Replaces 61633737, 001834890, 1834890 8....

Check Stock

70" 6AN SS Braided Transmission Cooler Hose Lines,for 700R4 4L60 4L60E 4L65E 4L80E,Compatible with Ford C4/C6/AOD & GM Chevy 1996-2021

【Compatible With】：Applicable to GM turbo 350 (partially 1 / 4 "NPT), turbo 400,turbo 200-200R4,power glide (partially 1 / 4" NPT),700R4,4L60 4L60E,4L65E,4L80E,compatible with Ford C4/C6/AOD & GM Chevy 1996-2021..
【Function】：Improving the cooling efficiency of the vehicle's gearbox helps to avoid heat related faults and thus extends the service life of the equipment..
【70" 6AN Transmission Cooler Lines Kit Includes】：Two stainless steel braided hoses with an inner diameter of about 70 inches and 3 / 8 inches.
Four an-6 flared to 1 / 4 inch NPT billet adapters.
Two an-6 flared to 3 / 8 "NPT billet adapters.
four 90 degree an-6 reverse flared to an-6 flared billet adapters, two aluminum 4l80e adapter accessories..
【Superior Material】：The transmission cooler pipeline kit adopts high-quality 304 stainless steel braided PTFE hose, which has good protection effect, soft, tough and wear-resistant. It is not easy to leak when operating under high pressure..
【After Sales】：Please check the hose and fitting dimensions before ordering.1 ....

Check Stock

55565353 667-203 Docas Turbocharger Turbo Compatible with 2013-2019 Buick Encore 2011-2019 Chevy Cruze 2012-2019 Sonic 1.4L

When the performance of the supercharger is reduced the compressor or turbine blade is damaged or the noise generated when the turbo chargers is operating, it's time to replace your turbocharger.
Compatible with 2011 - 2019 Chevy Cruze 1.4L L4, 2016 Chevy Cruze Limited 1.4L L4, 2012 - 2019 Chevy Sonic 1.4L L4, 2013 - 2019 Chevy Trax 1.4L L4.
Compatible with 2013 2014 2015 2016 2017 2018 2019 Buick Encore 1.4L L4.
Replace part numbers: 667-203, 667203, 55565353 7815040001 7815040002, 781504-0002 7815040004 781504-0004 7815040001 781504-0001 7815040002, 7815040004 7815045006 55565353, 7815040005 781504-0005 7815040006.

Check Stock

NEW 55-57 CHEVY FRONT ENGINE MOUNT KIT WITH BRACKETS FOR SBC V-8 ENGINES, BLACK POWDER COATED, INCLUDES SHAFTS & RUBBERS, 1955 1956 1957 TRI-5 150 210 BEL AIR DELRAY NOMAD SEDAN, SMALL BLOCK CHEVY

Brand New Southwest Speed Front Engine Mounting Kit that includes O.E. Replacement Front Engine Mounts, and Powder Coated Black Engine Mounting Brackets that fits 1955-1957 Chevy's with Small Block Chevy V-8 Engines (SWS # 400-6897) > The engine mounts on your Tri-Five Chevy are crucial for reducing vibration and extending the life of your engine and its components.
This Southwest Speed 1955-1957 Chevy front engine mounting kit mounts the Small Block Chevy engine in the correct location in 55-57 Tri-Five Chevy’s The front engine mounts includes the shafts, rubbers, washers, nuts, and lock washers that are usually missing or worn out on 55-57 Tri-Five Chevy's > This kit will do both sides, and includes everything pictured to restore the mounts back to new condition.
The Mounting brackets are Powder Coated Black and are the OEM replacement brackets with all the correct contours This kit includes both the left and right side front engine mounts, and both left and right side front engine mounting brackets, that includes everything pictured.
Note: These engine mounting brackets will only bolt on the early Chevy Engine Blocks that have the 4 bolt holes tapped 3/8"-16 in the front > These tapped holes are located in the cast bosses, that are either side of t....

Check Stock

Suspension Rear Lowering Shackles 2" Leaf Spring Drop Shackle Kit fit for Chevy C1500 C2500 K1500 K2500 Suburban S10 Blazer Tahoe Silverado 1500 GMC Yukon Sierra Ford Ranger F150 Replaces 6400 410520

【Compatible】The suspension rear lowering shackles kit compatible with 1988-1998 Chevy C1500 & C2500, 1992-1999 Chevy C1500 & C2500 Suburban, 1992-1999 Chevy K1500 & K2500 Suburban, 1992-1994 Chevy S10 Blazer, 1995-1999 Chevy Tahoe, 1999-2019 Chevy Silverado 1500, 2007 Chevy Silverado 1500 Classic, 2019 Chevy Silverado 1500 LD, 1992 Chevy S10, 1988-1998 GMC C1500 & C2500, 1992-1999 GMC Yukon, 1999-2019 GMC Sierra, 1998-2009 Ford Ranger, 1997-2003 Ford F150, 2004 Ford F150 Heritage..
【Function】The suspension rear drop shackle kit is designed to lower the rear of your sport truck or SUV up to 2 inches..
【Replaces OE】The suspension rear lowering shackles replaces OE: 6400 410520. Installation is very simple, no welding is required. According to different models and years, the suspension rear drop shackle kit will be installed in different directions. If you are not sure, please contact us first..
【Quality】The suspension rear lowering shackles kit is manufactured by an ISO-certified manufacturer, and meets or exceeds OEM requirements. 100% factory tested.Replaceable and lubricable polyurethane bushings have longer driving performance and longer service life.
TIG welding is better than conventional MIG welding.

Check Stock

K03 KO3 Turbo Rebuild Kit Turbo Lab America K03 KO3 KO4 K04 Mini Cooper Turbo Rebuild Kit

Upgrade 360 Degree Thrust Bearing with 3 Oil Ports.
Fits VW 1.8T, VW Passat 1.8T, Jetta 1.8T.
Fits Chevy Cobalt SS Turbo, Saturn Sky Turbo, Pontiac Soltice Turbo, Mini Cooper Turbo.

Check Stock

Southwest Speed New 55-56 Chevy Factory Replacement Clutch Pedal Rubber Stopper MOUNTING Bracket & Hardware TRI-5 1955 1956 150 210 BEL AIR Nomad Sedan DELIVERY

Brand New Southwest Speed Factory Replacement Clutch Pedal Stopper Bracket Kit that includes the Mounting Bracket, Rubber Stopper, and mounting....
This Southwest Speed clutch pedal stopper bracket kit is a reproduction of the original used on 1955-1956 Chevy's with manual transmissions > This kit....
If you are doing a restoration of a 1955-1956 Classic Chevy or just the want the correct parts then you have came to the right place > NOTE: This....
Features: > Factory Reproduction > Includes (SWS # 650-4666 Rubber Stopper) > Fabricated from steel > Heavy Duty Rubber Stopper > Includes Mounting....
Applications: > 1955-1956 Chevy Bel Air > 1955-1956 Chevy 150 > 1955-1956 Chevy 210 > 1955-1956 Chevy Nomad > 1955-1956 Chevy Sedan Delivery.

Check Stock

Keenso Th350 Kickdown Cable, Silver Stainless Steel Braided Kickdown Cable For 350 Turbo Transmission Assembly Detent Kickdown for Chevy TH350

【Compatibility With】-- Th350 Kickdown Cable, fit for GM(Chevy, Olds, Pontiac, etc.)350 TH350 Transmissions. Please check the vehicle model before purchasing.
【Durable Stainless Steel】-- Our th350 long kickdown cable is made of premium staninless steel material, sturdy and solid, durable for long lasting performance.
【Specifications】-- Material: Stainless Steel, Color: Silver, Package Weight: approx. 160g, Fitment: for GM(Chevy, Olds, Pontiac, etc.)350 TH350.
【Wide Application】-- This ickdown cable for 350 turbo transmission is adaptable to all types of manifolds, universally applied.
【Easy to Install】-- Our kickdown cable turbo 350 is easy to install, very practical and simple, perfect replacement for the old one.

Check Stock

Universal 4 Turbo Dual Smoker Diesel Exhaust Stack T Pipe System with 2Pcs 4 Inlet 8 Outlet Gloss Black Stainless Steel Miter Angle Cut Diesel Smoker Stack Tips

Universal 4" Turbo Dual Smoker Diesel Exhaust Stack T Pipe Kit + 4"Inlet 8"OutLet Cut Stack Tips Gross Black.
Designed For Chevy/Dodge/Ford Full Size Pickup Truck.
Smoke kits:T409 Stainless Steel & Coated Black.
Cut Exhaust Stack Tip：Inlet: 4" (101.6mm), Outlet: 8" (203.2mm), Total length: 36" (914.4mm) Gloss Black Finish.
Professional installation is highly recommended.
Package includes1 Set Smoke kit with 2 Cut Exhaust Stack Tip.

Check Stock