Best Trolling Motor Mount For Pontoon

Codinter Kayak Motor Mount, Trolling Motor Mount Kit for Sit-On-Top Fishing Kayak Scupper Holes/Kayak Mount Tracks

【Two Install Scenes】 This kayak motor mount works with kayak scupper holes and parallel kayak mount tracks, such as sit-on-top kayaks and fishing kayaks, not for declining flush mount fishing rod holders in the kayak.
【No Drilling Requires】 Installing this kayak trolling motor mount kit does not have to drill into your kayak hull, It’s easy to install just simply plug into the scupper holes or mount it on the track, it’s stable and tightened by the supplied ratchet strap.
【Quality Materials】 The materials used to make this kayak motor mount bracket include anodized aluminum, UV stabilized reinforced plastics, and stainless steel fasteners, this kit is extremely durable and built to last for fresh or saltwater use.
【Heavy Duty】 The mounts are designed to fit into kayak scupper holes / tracks that range from 3.54”-31.5” in width, the diameter of the poles is 1 inch. It can be rated to hold up to 66lb (30kgs) thrust trolling motors.
【Motor Mount】 Suitable for mounting electric and petrol trolling motors either right or left hand side.

UNIVERSAL REPLACEMENT: A universal bracket that converts transom mount trolling motors to bow mount in minutes.
Fits most Jon or Utility boats with gunnels or toprails less than three inches wide and one inch deep..
STRONG & STURDY: Built to mount trolling motors up to 60 lb thrust.
Indestructible fiberglass reinforced nylon.
FAST & EASY SET UP: Installs quickly with a small hammer and punch to remove and replace pin.
Spend less time assembling and more time fishing.
ULTIMATE VERSATILITY: A trolling motor mounting bracket with choices.
EZ Mount 2 lets you install your transom mount motor anywhere on the boat.
Built with the needs of the Angler in mind.

12V 35AH GEL rechargeable maintenance free battery.
Dimensions 7.63 inches x 5.19 inches x 6.85 inches.
Compatibility Deep Cycle Solar 33Ah 34Ah 36Ah Sevylor Minn Kota Marine JohnDeere Lawn Tractor-Riding Mower 108 Kangaroo TG-31 Golf Cart Yamaha Rhino Utility Vehicle UTV Goal Zero Yeti 400 Solar Generator GENERAC OD4575 Inverters Signage Minn Kota Endura C2 Trolling Motor Wheelchair Scooter 33Ah Ritar RA12-33 Bat-Caddy X3R Golf Caddy Portalac TEV12360 Pontoon Trolling Motor Yuasa NPC30-12 NPC 30-12 Interstate DCM0035L Dyna Cell U1 U131 U132 Pride Mobility Sundancer Wheelchair.
True deep cycle battery that can be mounted in any position Resists shocks and vibration Long lasting high performance in high and low temperatures.
Factory activated GEL battery Maintenance free No acid pack needed Advanced design works right out of the box and requires no maintenance yet offers the option to prolong the standard life by adding extra electrolytes.

Jumper Internally To Supply 12V And 24V Power To The Trolling Motor.
4-Wire Trolling/Charging System Eliminates The Need For A Charge/Run Switch.
Install The Receptacle On The Boat, Mount The Black Plug On The Trolling Motor And The Red Plug On The Leads Of The Battery Charger.

Allows trolling motor to be quickly removed from and reattached to boat deck.
Cam-lock reduces bracket movement and noise.
Composite cover (included) attahes to lower piece of bracket when motor is removed to keep deck profile clean.
Includes stainless steel mounting hardware, lanyard, and locking pin.
Compatible with Ulterra, Terrova, PowerDrive, PowerDrive V2, PowerDrive Pontoon and DeckHand 40.

Easy Setup and Removal - Motor mount connects to most kayak hulls in a matter of minutes and can be removed in a matter of seconds.
Ambidextrous Design - Mount allows for installation of trolling motor for easy use by both left and right handed boaters.
Durable Materials - Rust-resistant metal and fade- and corrosion-resistant plastics will stand the test of time and exposure to the element.
Lightweight Construction - Hollow but sturdy tubing reduces motor mount weight, allowing for easy handling of mount and adding minimal weight to kayak.
Must Have for Fishing - Helps upgrade a paddle only kayak into the ultimate trolling fishing vessel without any permanent hull alterations required.

This is a Trolling Motor Control Switch that is made for 12V, 24V trolling motors. This product is made of Black PC and it comes with a push switch..
This trolling motor is rated to 50 Amps and has a weatherproof control system at IP:65. It also comes with a continuous "ON" lever..
For installation, select a desired location for switch. Then, mount the switch to deck with fasteners included..
Connect the negative wire of motor to the negative of DC as shown in the diagram. Connect a wire of the switch to 12/24VDC positive. Connect another wire of the switch to the positive of the motor as shown in diagram. Test the operation after set-up..
Product Dimension (Switch): 3-1/4" x 2-1/2" x 1-1/4". Item Number: P72520-02..

MORE MOUNTING OPTIONS: Fish from the bow like the Pros.
An mounting bracket that converts transom mount trolling motors to bow mount.
Fits most Jon or Utility boats with gunnels or toprails less than three inches wide and one inch deep.
PREMIUM DURABILITY: Constructed with stainless steel hardware and indestructible fiberglass reinforced nylon.
FAST SET UP: Simple and seamless tool-free installation.
Line up the lower bracket to the outside of the boat, screw clamps tight, and slide on the trolling motor.
UNIVERSAL FIT: Measures 9.5” L x 6.75” W x 9” H and weighs 6 lbs.
EZ Mount lets you install your transom mount motor anywhere on the boat.
Built with the needs of the Angler in mind.