Best Tripod Umbrella Stand

Hooshion Metal Tripod Umbrella Holder, Outdoor Camera Tripod Umbrella Holder Metal Clip Bracket Stand Clamp Photography Accessory(Metal Clip Not Plastic Clip)

  • Umbrella chair clamp middle is designed to rotate and adjust the angle function.You can adjust the angle to the suitable position.The umbrella clip is composed of two parts, the top can be detached for use, and the standard 1/4 screw head of the at the top can be used as a base for digital cameras and GoPro..
  • Umbrella clip for camera, one end to clamp tripod axis, the other end clamp umbrella handle, can be clamped on the center axis of tripod or tripod tripod..
  • The umbrella holder for chair body is made of metal, which is more durable and more load-bearing than most plastic umbrella clips on Amazon..
  • Umbrella holder clamp Length 17.5cm, clip opening is up to 3.5cm, it can clamp umbrella's rod or bottom handle.There is rubber pad in the inner clip, it is non-slip and anti-scratch..
  • Solve the need to shoot in the rain, insert an umbrella to protect your camera from damage. On sunny days, you can add an umbrella to shield your camera from the sun..
Check Stock

ASHINER 63' Phone Tripod Selfie Stick - Adjustable Camera & Cell Phone Tripod Stand with Bluetooth Remote, Portable Heavy Duty Aluminum Holder for Video Recording, Vlogging, Live Streaming

  • 【Stable Base Frame】The length of the three base feet of the smartphone tripod reaches 10.24 inches, the triangular contact area between the mobile phone stand and the ground reaches a maximum of 1008 square centimeters. In addition, the bottom of the phone camera stand adopts a new "umbrella" skeleton, three aluminum alloy tubes are added at the connection between the three base feet and the central aluminum tube to increase the stability and wind resistance of the tripod stand..
Check Stock

ChromLives Dual Flash Bracket Hot Shoe Speedlight Stand Umbrella Holder Light Stand Bracket Mount 1/4'' to 3/8'' Compatible with Studio Video DSLR Camera Canon Nikon Yongnuo

  • Light Stand Bracket, Dual Cold Shoe Mount Extension Bar with Umbrella Holder..
  • Dual Flash Shoe Bracket- With double cold shoe mount on an Extension bar. Universal cold shoe mount for most DSLR Camera Canon, Nikon and other flashes with standard shoe mount or video LED light, studio light. (Note:this adapter does not fit Sony and Minolta flash).
  • Umbrella Mount Bracket- A hole design for mounting urbrella. 180° Swivel joint allow vertical adjustment of the umbrella and flash light..
  • Light Stand Bracket- Comes with a 1/4 inch to 3/8 inch screw spigot, allow the light stand bracket to attach to a tripod or light stand..
Check Stock

Selfie Stick Phone Tripod with Remote - ASHINER 69' Portable Phone Stand for Recording, Extendable Cell Phone Holder with LED Light for iPhone, Android Phones, Video, Vlogging, Live Streaming, Travel

  • 【Reinforced Tripod Base】The base of this portable tripod for iphone adopts the latest structural design, strengthening the load-bearing capacity and anti-slipping ability. The length of the tripod leg is extended to 8.66 inches which allows it to have a more extensive base.The umbrella-shaped skeleton structure makes this cellphone tripod more stable, the material of the core foothold is upgraded to premium zinc alloy..
  • 【Dual LED Fill Light With Three Light Modes】There are 2 rechargeable fill lights on the phone tripod stand, you can change it with a USB cable. These professional high lumen lights can effectively help to improve your image quality. The fill light has three modes: white light, soft light, and warm light. This selfie stick for iphone perfectly fits a variety of 4-7 inch cellphone, including iPhone 13 12 11 pro max XS MAX 8 6 7 Plus Android Samsung Galaxy note 20 10 S10 S9 Blackberry LG..
Check Stock

Meking 49in Padded Tripod Carrying Case Bag with Shoulder Strap for Light Stand, Boom Stand, Monopod, Umbrella and Other Photography Photo Studio Accessories

  • Made of Strong and Durable Nylon Material: It is waterproof and protect your equipment from unexpected weather when you are outdoors or traveling.
  • With Foam Padded and Lightweight Design: Provide better protection that makes it safe and easy to transport your tripod, light stand, boom stand, monopod, umbrella or telescope.
  • Has a Small Interior Zippered Pocket: For carrying extra memory cards, chargers, and other small accessories.
  • Easy to Carry the Tripod Case in Two Ways: The handle and adjustable shoulder strap with quick-release buckles help to carry your tripod more comfortably and easily.
  • Dimensions: 49.2x7.8x7.8inches / 125x20x20cm. Fit your tripod up to 49". Can be folded and stored when not in use.
Check Stock

Hooshion Metal Tripod Umbrella Holder, Outdoor Camera Tripod Umbrella Holder Metal Clip Bracket Stand Clamp Photography Accessory(Metal Clip Not Plastic Clip)

  • The newly upgraded umbrella chair clamp middle is designed with 180 degree rotation and 90 degree adjustable angle function. You can adjust the angle to a suitable position. The umbrella clip is composed of two parts, the top can be detached for use, and the standard 1/4 screw head of the at the top can be used as a base for digital cameras and GoPro..
  • Umbrella holder clamp can mount monitor/small action camera/LED Lights/microphones/flash or any camcorder camera with 1/4 mount pattern, and then you can lock it on rod/tube/table/desk/tripod via the clamp tightened by the locking knob..
  • The umbrella holder for chair body is made of metal, which is more durable and more weight-bearing than most plastic umbrella holders on Amazon..
  • The Umbrella clip for camera is 8.26in in length, and the maximum clip opening is 1.18in. One end is clamped to the tripod shaft, and the other end is clamped to the umbrella handle. It can be clamped to the tripod or the center shaft of the tripod. There are rubber pads inside the clip, which are non-slip and scratch-resistant..
  • Solve the need to shoot in the rain, plug in an umbrella and protect your camera from damage. On sunny days, you can add an umbrella to protect your camera from the sun..
Check Stock

Fotopro Carbon Fiber Light Stand 78 Inch Adjustable Tripod Stand for Photography,Speedlight,Flash,Softbox Strobe Light,Camera

  • 【Sturdy and Durable】:Fotopro TR-01C light tripod stand is made of 3K carbon fiber so that it can provide an excellent strength and corrosion-resistant for outdoor shooting..
  • 【Lightweight & Compact】:The carbon fiber light tripod only weighs 1.9 lbs, but it can load up to 4.4 lbs. And the folding height 21.5 inch can be easily put into your bag when travelling..
  • 【Flexible & Extendable】:5-section carbon fiber light tripod legs and twist lock system allow you to easily adjust the height from 20 inch to 78 inch..
  • 【High Compatibility】:Carbon fiber light stand has 1/4" screw and can be used with any light head, such as reflector, softbox, lamp, umbrella, background, strobe light, etc..
  • 【Multi-Functional】:The carbon fiber light tripod can easily detach the center axis and use it as a monopod. It can also be turned into a handheld stick such as a microphone stick, selfie stick, etc..
Check Stock

Zeetain 8\/20cm Dual Speedlite Camera Mount Tripod Bracket Flash Extension Bar,8\ Dual Tripod Bracket for Camera,LED Video Light,DSLR Camera,Flash Light

  • Universal E Type Flash cold shoe bracket, Swivel light stand mount with Umbrella holder..
  • Universal metal cold shoe mount on top to mount your flash onto bracket.Work on monitor,ring light,Nikon Canon speedlite flash,trigger,magic arm,mic and any accessories that has a camera type of shoe..
  • A hole with locking screw in middle specially designed for holding umbrella..
  • Easy Adjustment. This Flash bracket is with 180° vertical and 360° horizontal adjustment to allow to position the umbrella and flash in different angle..
  • Comes with 1/4 inch to 3/8 inch screw adapter to attach it to a tripod or light stand or any camera rigs that with 1/4"-20 or 3/8"-16 male thread. Package includes 2 pcs of Flash Light Stand Bracket.
Check Stock

2Pack Updated Flash Bracket Flash Stand Light Stand Bracket Mount with Umbrella Holder Mount Swivel for Camera DSLR Nikon Canon Pentax Olympus and Other DSLR Flashes Speedlite Studio Light LED Light

  • 2Pack of Flash Bracket for Most Flash Speedlite- This flash bracket combines a universal E Type Flash cold shoe bracket (updated), Swivel light stand....
  • Your Expensive Flash will not Fall - Updated Universal Cold Shoe Bracket on top, the cold shoe will catch the flash shoe base firmly without dropping....
  • Umbrella Holder Mount- This flash bracket is with a hole with locking screw in middle specially designed for holding umbrella..
  • Light Stand Bracket Mount- Comes with 1/4 inch to 3/8 inch screw adapter to attach it to a tripod or light stand or any camera rigs that with 1/4"-20....
  • Easy Adjustment- This Flash bracket is with 180° vertical and 360° horizontal adjustment to allow to position the umbrella and flash in different....
Check Stock