Best Triple Sec

Portable Neck Stretcher Cervical Traction Provide Neck Support and Neck Pain Relief,Neck Traction Devices for Home Use Neck Decompression (Grey)

...to correct incorrect sitting posture..
【Ergonomic Design】The ergonomic design of the neck traction can perfectly fit your neck acupoints.Two Velcro straps allow you to customize the tightness. You can fix this neck traction device in the most comfortable position for easy stretching and effective pain relief..
【Triple Leakage Protection】There are three methods to avoid air leakage: a ball in the tube, an air release valve and a separate three-tube design. And the cervical neck traction can be inflated at the same time, and the air intake volume is synchronous. Even if you use this neck traction pillow frequently, there will be no air leakage..
【Easy to Use】 No assembly is required, only inflation and try to relax your neck. Step 1: Inflate it that makes you feel comfortable, after 1 minute realase a little air and keep it for 30 sec. Step 2: Inflate it again, a little bit more air this time, keep it for 2 minutes, realase some air and keep it for 30 sec. Step 3: Inflate with 1/2 pumps than last time, keep it for 3 minutes, deflate the product..
【Neck Support for Pain Relief】Our neck stretcher cervical traction is light and portable. It can be used at any time whether you are in the car, at work or at home. It is very suitable for neck pai....

Bag air jack weight capacity:6600lbs.Working pressure: 145Psi/10Bar/1.0Mpa.
Pneumatic jack lifting height range: 5.71”-15.75”.Air inlet: G1/4.Lifting time: 5sec.Working Temp: -60℃~ 50℃.
Powerful and very fast to use.Triple bag jack is the easiest and fastest way to install pinch weld clamps on the frame machine.
The air jack has large stressed area, fits on soft and easy-collapsing terrain.
Do not try to lift weight beyond capacity.

Manual memory measurements (up to 30 records, each including altitude, date, time).
Water resistant to 100m (330ft): in general, suitable for swimming and snorkeling, but not diving.

Rotation Mode:It Supports 45°/90°/180°/360°Circulation.
Rotation Speed:The speed range is 10-30 sec/rev.(High : 10 sec / rev , Medium : 15 sec/rev, Low : 30 sec/rev).
Power Supply: 18650 or 3 AAA Battery Operated( Not included) and USB Power Supply.
Diameter :5.5 inch,Max Centric Loading Capacity: 6.5 Lbs.
Wide Application :Used For Theme Exhibition, Window Display, Product Display, Photograph Show, Cube Spin Display, Advertising..

CYS 36g/3.9kg/ .16sec Standard Servo S3003 2X bearing.
0.12 sec/60° @ 6V Torque: 3.9kg-cm @ 4.8V.
3.3kg-cm @ 6V Weight: 36g / 0.94oz Power Supply: 4.8V/ 6V Connector type: JR/Futaba compatible It will work with Futaba J, Hitec S, JR, and Airtronics-Z radio systems..

【SUPER OCCUPANCY SENSOR】 - 3 detectors for triple overlapping coverage to catch even small movements..
【LIGHT SENSOR ADJUSTABLE】 - 3LUX~2000LUX adjustable, the ceiling occupancy sensor can be adjusted to both work in day and night, or only work at night..
【TIME DELAY ADJUSTABLE】 - 10sec-7min adjustable, the delay time controls how long the light stays on once the ceiling motion sensor gets triggered, during the delay time if motion detected, the delay time will reset and start a new delay time..
【DETECTION RANGE ADJUSTABLE】 - 3-12m adjustable, the sensor switch can be adjusted according to your demand. The ceiling occupancy sensor both fits for small room and large room..
【PIR MOTION SENSOR】 - Working by detecting human movement(or heat source), the motion sensor switch is widely used on LED light, compact fluorescent lamp, incandescent lamp, ceiling light, exhaust fan....

The MS6208A is a contact-type digital tachometer which is used in applications such as automobile maintenance, mechanical engineering, and maintenance of industrial equipment.
Measurement mode: m/min m/sec ft/min ft/Sec in/min..
Highly accurate contact digital tachometer with high speed operation and instant readings from 50 to 19999RPM.
The LCD is backlit to allow making and reading measurements in low light conditions..
Functions: Auto Power Off, MAX/MIN/AVG Functions, m/min m/sec ft/min ft/Sec in/min unit selection, 100 groups Data Logging.

... / Car / Airplane / Helicopter / Vehicles / Robots . Created from the Highest Quality Parts Available and Put Together with Care. to give You the Best Experience in Controlling Your Remote Controlled Vehicle. Interface Type: Compatible with JR & FUTABA interface..
Servo Motor Specs: No Load Running Speed: 0.09±0.01 sec/60° Degree at 4.8V.
Stall Torque (4.8V): 152,76 oz/inch / 11kg/cm, Type: Analog Controller, Operating Voltage: 4.8V - 6.0V, Left & Right travelling Angle deviation: ≤ 6° Degree, Centering deviation:≤ 1° Degree, Maximal Angle 120° Degree Neutral position: 1500 μsec, Dead band width:7 μsec (microsecond), Rotating direction: Counter Clockwise (900→2100μsec), Pulse width range: 900→2100 μsec, Operating Temperature Range: 0℃～55℃elcius.
Compatibility: Compatible with Remote Control Drones, Helicopters, Cars, Boats, and all sorts of RC Toys and hobby projects. Can also be used with any type of Arduino project, Raspberry Pi, Futaba, JR, Sanwa and Hitec remote system..
Set Contains: 1x MG995 Micro Servo Motor 55G, 1x 3 Colored Cable (Brown / Yellow / Red) with a Futaba Connector Plug, 4x Servo Horn Steering Arms (Star, Arm, X, Wheel), 4x Stainless Steel Screws..
High quality product by MMOBIEL: Each part is tested before ship....