Best Transmission Power Control

Yahboom 4 Port USB 3.0 Hub for Raspberry Pi Jetson Nano ROS Robot, Compatible with USB 3.0/2.0/1.1 Driver-Free Plug&Play, Onboard External USB-A，5V (Micro-USB)，9~24V Power Port, for High-Power Device

  • VL817 main control chip -- USB3.0 HUB expansion board aims to solve the problems of insufficient USB interface on the main board and insufficient power supply caused by the increase of USB peripherals.Equipped with VL817 main control chip scheme, the main control board performance is stable and the transmission is stable and safe. It uses USB3.0 communication interface and HUB chip expand 4 USB interfaces to ensure high-speed data transmission of the interface..
  • 1 to 4 data extension -- The expansion efficiency of the four ports is doubled and Each USB device has an independent indicator light. Built in over current protection, short circuit protection and power reverse connection protection circuit to ensure the safe use of USB devices..
  • Support wide voltage external power supply -- In addition to the USB-A standard data interface power supply, this product also supports 5V (micro-USB), 9~24V (DC interface/XH2.54 socket) wide-voltage external power supply. Even if multiple high-power peripherals are connected at the same time, the stability of power supply and signal transmission can be guaranteed..
  • Support equipment -- Support ROS robot / car, Raspberry Pi / Jetson series board, PC, other boards, industrial computer, etc. Compatible with win7 / 8 / 10....
Check Stock

85401-201 Edge Evolution CTS3 - 50 State Legal

  • Change 5 power levels on-the-fly using +/- cruise control buttons.
  • Connects directly to ECU in engine compartment providing instant power.
  • Built-in throttle sensitivity control for improved throttle response.
  • High-idle user settings to adjust RPM during idle.
  • Transmission slip backdown power will decrease if slip is detected.
Check Stock

Godox 2X TT600 High Speed Sync 2.4G GN60 Camera Flash Speedlite Speedlight with Godox X2T-N Wireless Remote Trigger Transmitter Compatible for Nikon Camera & 2X Diffusers & 2X Filters & USB LED

  • Godox TT600 flash Speedlite adopts Godox wireless X-system, with build-in 2.4G wireless transmission, it can be used with Godox AD360II-C/AD360II-N flash Speedlite , TT685C/TT685N flash Speedlite ,V860IIN/ V860IIC Speedlite ,X1T-C/X1T-N/X2T-C/X2T-N/XPro-C/XPro-N trigger and other devices that with wireless control system. When used with Godox X1/X2/Xpro TTL wireless Transmitter trigger, it can realize remote control, high speed sync and more functions, make your shooting simpler and easier..
  • Godox TT600 Speedlight can compatible with most brands cameras such as Canon Nikon Pentax Olympus Fujifilm Panasonic and other digital cameras with standard hot shoe. It's equipped with optic transmission and 2.4G wireless transmission, offers you an even illumination and stable power output, giving you more outstanding light effect..
  • Build-in 2.4G wireless transmission with all-in-one functions and 100 meters further transmission, to offer you a stable output and creative light effect.Come with 2xTT600 flash Speedlite, 2xDiffuser, 2xFilters and Godox X2T-N wireless Trigger Transmitter is Compatible for Nikon cameras..
  • Superior performance: More flash times, approx.230 full power flashes (using 2500mA Ni-MH batteries), provide enough flash times for your shooting. F....
Check Stock

TP-Link AX5400 WiFi 6 Router Archer AX73 - Dual Band Gigabit Wireless Internet Router High-Speed ax Router for Streaming Long Range Coverage Renewed

  • Built in 9dBi 2x2 dual polarized directional MIMO antenna.
  • Adjustable transmission Power from 0 to 27dBm/500mW. Power Consumption: 10.5 Watts Max, Note: When deployed using Passive PoE, the power drawn from....
  • System level optimizations for more than 5km long-range wireless transmission (only for paired Point-to-Point or Point-to-MultiPoint transmission).
  • TP Link Pharos tdma (Time Division Multiple Access) technology improves product Performance in throughput, Capacity and latency Performance.
  • Centralized management system Pharos Control.
Check Stock

BLACK+DECKER String Trimmer, 6.5-Amp, 14-Inch (GH900)

  • The 6.5 amp motor and POWERDRIVE Transmission of edger/trimmer provide maximum performance when trimming through the toughest weeds, grass and overgrowth.
  • The AUTOMATIC FEED SPOOL (AFS) of the grass cutter automatically feeds trimmer line when needed with no bumping required.
  • 2-in-1 Trim or Edge with wheeled edge guide - just rotate to convert from lawn trimmer to wheeled edger.
  • Lightweight ergonomic design with adjustable height and pivoting handle positions gives maximum comfort and control.
  • Cord retention system prevents accidental cord disconnection.
  • AFS automatic feed system ensures continual work without bumping or having to stop.
  • Power Drive Transmission prevents bogging down.
  • Lightweight ergonomic design with adjustable height and pivoting handle.
  • The 6.5 amp motor and high torque transmission provide maximum performance.
Check Stock

Godox 2X TT600 High Speed Sync 2.4G GN60 Master Slave Off Flash Speedlite Speedlight with Godox X2T-C Wireless Remote Trigger Transmitter Compatible for Canon Cameras & 2x Diffusers,2x Filters,USB LED

  • Godox TT600 flash Speedlite adopts Godox wireless X-system, with build-in 2.4G wireless transmission, it can be used with Godox AD360II-C/AD360II-N flash Speedlite , TT685C/TT685N flash Speedlite ,V860IIN/ V860IIC Speedlite ,X1T-C/X1T-N/X2T-C/X2T-N/XPro-C/XPro-N trigger and other devices that with wireless control system. When used with Godox X1/X2/Xpro TTL wireless Transmitter trigger, it can realize remote control, high speed sync and more functions, make your shooting simpler and easier.
  • Godox TT600 speedlight can compatible with most brands cameras such as compatible with Canon Nikon Pentax Olympus Fujifilm Panasonic and other digital cameras with standard hot shoe. It's equipped with optic transmission and 2.4G wireless transmission, offers you an even illumination and stable power output, giving you more outstanding light effect..
  • Build-in 2.4G wireless transmission with all-in-one functions and 100 meters further transmission, to offer you a stable output and creative light effect.Come with 2xTT600 flash Speedlites , 2xDiffusers ,2xFilters and Godox X2T-C wireless Trigger Transmitter is Compatible for Canon EOS series cameras..
  • Superior performance: More flash times, approx.230 full power flashes (using 2500mA Ni-MH batteries), provide enough fla....
Check Stock

Crazy Sales CNC Lathe Controller, Numerical Control System, High Precision for Program Editing Program Reading(Four axis)

  • You can directly use the USB cable to power the system, which is convenient for the transmission of the boot screen and the program, learning and operation.
  • Isolated IO port means that with input and output ports isolated from the system, the output port capacity can be up to 1A.
  • Direct output terminal interface on the back reduces the transfer board, the terminals on the back can be directly wired, clear and convenient, which saves costs.
  • With 20 control commands, external manual supports control motor CW /CCW, start, pause, alarm, emergency stop, etc..
  • Supports automatic operation including dry running and single-step running, CNC lathe controller 's manual operation including motor CW /CCW, back to program 0, back to mechanical 0 and output control..
Check Stock

Low Noise CNC Lathe Controller, Simple Operation Numerical Control System, for Program Editing Program Reading(Dual axis)

  • You can directly use the USB cable to power the system, which is convenient for the transmission of the boot screen and the program, learning and operation.
  • Isolated IO port means that with input and output ports isolated from the system, the output port capacity can be up to 1A.
  • Direct output terminal interface on the back reduces the transfer board, the terminals on the back can be directly wired, clear and convenient, which saves costs.
  • With 20 control commands, external manual supports control motor CW /CCW, start, pause, alarm, emergency stop, etc..
  • Supports automatic operation including dry running and single-step running, CNC lathe controller 's manual operation including motor CW /CCW, back to program 0, back to mechanical 0 and output control..
Check Stock

ACEIRMC 5pcs 12 Bit WS2812 WS2812B Full Color 5050 RGB Lamp Panel Round LED Ring Lamp Light for Arduino (12 Bit)

  • 4-7V Intelligent reverse connect protection.
  • the power supply reverse connection does not damage the IC The control circuit and the LED share the only power source Control circuit and RGB chip are integrated in a package of 5050 components.
  • form a complete control of pixel point Built-in signal reshaping circuit, after wave reshaping to the next driver, ensure wave-form distortion not accumulate Built-in electric reset circuit and power lost reset circuit Each pixel of the three primary color can achieve 256 brightness display.
  • completed 16777216 color full color display, and scan frequency not less than 400Hz/s Cascading port transmission signal by single line Any two point the distance more than 5m transmission signal without any increase circuit When the refresh rate is 30fps, cascade number are not less than1024 points Send data at speeds of 800Kbps The color of the light were highly consistent, cost-effective.
  • Wattage:0.7W Applications Full-color module, Full color soft lights a lamp strip LED decorative lighting, Indoor/outdoor LED video irregular screen.
Check Stock