Best Transmission Cooler With Synthetic Hose

Byredio 3/8 Fuel Line Braided 6AN 10ft Transmission Cooler Hose for Oil,Gas,Fuel,Hydraulic 350-1400 psi High Pressure & Tamper Resistant (8.71mm ID)

  • ... ✅NYLON BRAIDED - The braided fuel line can stand-104ºF to +302 ºF/-40ºC to +150ºC, 350 PSI Working Pressure Tolerance, the fuel line has good retardancy and excellent corrosion resistance.Best for the brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, and transmission system, oil cooler kit, ect...
  • ✅WIDE APPLICATION - The 6an fuel line specially designed to compatible with any fuel (including methanol and nitromethane), oil, coolant, brake, transmission, clutch, diesel, hydraulic fluid, pump gas, and nitrous oxide. but NOT FIT E85..
  • ✅CUT THE SIZE AS YOU WANT - The 6an fuel line is 10 Feet / 3 m, can be cut to size for all your applications. Our braided fuel line is also an excellent alternative to conventional fuel lines, the 6an hose can be applied to higher-intensity temperature and pressure environments. Oil resistant, cold-resistant, and ethanol tolerance..
  • ✅FLEXIBILITY - The highlight of this fuel line is its sublime pliability. Steel, aluminum, or plastic lines will not bend as easily as this tube. The superior bending ability of this fuel tube makes i....
Check Stock

GSTP 6AN SS Transmission Cooler Hose Fitting Stainless Steel Braided Cooling Lines Compatible with Chevy Ford Mopar Replacement for TH350/ 700R4/ TH400 50"

  • Application: Our braided transmission cooler hoses compatible with Chevy Ford Mopar Buick Cadillac Cars and Trucks.
  • Fitment: The Transmission Cooler Hose Fitting compatible with Rat Rod, Hot Rod, Street Rod, Muscle Car, Custom and more.
  • Works with lots of Chevy, Ford, Mopar, Buick, Cadillac cars and trucks.Replacement for most 700R4, TH350, TH400..
  • Well-made: Made of high-quality stainless steel, not easily deformed, can be used for a long time..
  • Size: About 52 inch & 3/8" stainless steel braided hoses, the inner diameter of each hose is 3/8", length is approximately 52", and comes with an AN-6 inverted torch end..
  • Warranty: Sales is just the beginning of service. If you have any problems, contacting us and we will serve you within 24 hours..
Check Stock

EVIL ENERGY 10AN Fuel line Hose Braided Nylon Stainless Steel Oil Gas CPE 10FT Black

  • Application: AN10 braided fuel line widely used as transmission cooler line, fuel return line, fuel supply line, coolant fluid hose, engine cooler line..
  • Nylon and stainless steel braided fuel line can be compatible with transmission fluid, coolant, oil, pump gas, race gas, vacuum, hydraulic fluid, diesel and fuel..
  • Maximum Working Pressure: 500psi. Bursting Pressure: 2000psi. Temperature Range: -40℉ to 257℉..
  • Inside Diameter: 9/16". Outside Diameter: 0.78inch. Length: 10 Feet. Please measure before purchase!.
  • EVIL ENERGY provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..
Check Stock

Derale 13950 Atomic-Cool Remote Cooler , Black

  • Universal:universal oil cooler,you may need to do some custom modifications and require other hardware to meet your needs.Please measure before purchase to make sure there is enough space for installation..
  • Installation location:choose a place with good and cold air through the oil cooler kit for installation.Instruction included..
  • Function:keep oil temperature low, help to improve the lubricating effect of engine oil, prevent parts damage ,or even seizure of the engine.Usable to cool down engine oil,transmission, and rear-differentials.Besides,this stacked-plate oil cooler design smaller and lightweight suitable for narrow space..
  • Size:10AN 30Row oil cooler,oil capacity:0.74L.Test pressure: 116psi,burst pressure:232psi.Material:aluminium alloy..
  • Package Include:1pc 30row engine oil cooler.2pcs 10an female to 8an male fittings,2pcs 10an female to 6an male fittings.Can be used to connect 8AN / 6AN braided fuel line hose ends..
Check Stock

6AN Transmission Cooler Hose Kit Lines Fitting Kit for GM Chevy 1996-2021 4L80E, for Ford C4-C6-AOD, for Turbo 350/400/200-200R4/700R4 4L60 4L60E 4L65E,Stainless Steel Braided Lines

  • Replace Number - Transmission cooler hose fitting replace number is TH350 700R4 TH400..
  • Package Include -about 70 inch & 3/8" I.D. Stainless Steel Braided Hoses.
  • / AN-6 flared to 1/4" NPT billet adaptors.
  • /AN-6 flared to 3/8" NPT billet adaptors.
  • /90 degree AN-6 inverted flare to AN-6 flare billet adaptors.
  • SS Braided Transmission Cooler Hose Line.
  • 1 year warranty for it.If you have any problem ,please contact us and we will respond you on 24 hours.
Check Stock

Transmission Oil Cooler LPD47391 Low Pressure Drop Trans Cooler 40000 GVW OC-4739-1 LPD-4739-1 with Mounting Hardware (Silver)

  • Fitment:LPD47391 Advanced Cooling Protection for Car, Van, Light Truck, R.V. and Towing Applications.Suitable for applications up to 40,000lbs Gross Vehicle Weight.
  • High-Quality: Precise fin Spacing.Reliable, Durable Brazed Aluminum Construction..
  • Function:Self-regulating flow for maximum lube flow protection through cold start-up, varied temperatures and driving conditions, heavy loads and towing.
  • Package included: Transmission Oil Cooler,Bolts, nuts, washers, mounting straps, Brass fittings, high-quality cooler hose,hose clamps(No installation instructions).
  • NOTE: This kit is NOT intended for operation below 32 degrees Fahrenheit.
Check Stock

MuHize Transmission Cooling Hose - Upgraded 70 Inch SS Braided Transmission Cooler Line, Heavy Duty Transmission Cooler Hose Fitting 6AN Compatible with GM Chevy Ford Turbo 700R4 4L60E 4L65E 4L80E

  • PACKAGE INCLUDE - 2 x 70 inch 3/8 I.D. Stainless Steel Braided Hoses.
  • 2 x AN-6 flared to 1/4 In NPT billet adaptors.
  • 4 x AN-6 flared to 3/8 In NPT billet adaptors.
  • 4 x 90-degree AN-6 inverted flare to AN-6 flare billet adaptors.
  • COMPATIBILITY - MuHize 70 inch transmission cooler hose fits for GM Chevy 1996-2021 4L80E, for Ford C4-C6-AOD, for Turbo 350/400/200-200R4/700R4 4L60 4L60E 4L65E..
  • DURABILITY - This transmission cooling line kit is made of high-strength PTFE(Teflon), which is resistant to high & low temperatures and is anti-corrosion. The precision braided stainless steel on the outside of the hose greatly increases the strength of the tube..
  • ANTI-LEAKAGE - The interface is covered with black rubber, which can effectively prevent leakage and ensure the normal operation of the hose..
  • DIFFERENT FITTINGS - Different sizes of fittings are for different cars and turbos. Please check as much as possible to make sure the transmission cooling hose is the one that you need..
Check Stock

8AN 20FT Fuel Line Hose Kit with End Fittings Nylon Stainless Steel Braid Black 1/2' - 11.12mm ID (AN8)

  • 【Includes】The 8AN nylon and stainless steel braided CPE fuel line kit includes: 10pcs 8an CPE hose ends (4 x Straight Swivel Hose Ends, 2 x 45 Degree Swivel Hose Ends, 2 x 90 Degree Swivel Hose Ends, 2 x 180 Degree Swivel Hose Ends) and 1/2 CPE braided fuel line (Length:20ft/6M).
  • 【Materials】The 8AN CPE fuel line Hose mostly used in cooler system and pump, fuel system, transmission system, Can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, coolant, fuel, and etc, but not applicable to E85..
  • 【Lifetime】The 8AN CPE hose working temperature range: -40℉ to 257℉ (-40℃ to 125℃). It is compatible with nearly every substance or agent used. Maximum Working Pressure (psi): 500 psi. Bursting Pressure (psi): 2000psi..
  • 【CPE Hose】The 8an CPE hose fitting is reused, just replaced a new olive/ferrule when reusing fittings with CPE hose. CPE tube is constructed with a seamless extruded CPE resin inner tube..
  • 【Warranty】Three months limited warranty & Free lifetime technical support..
Check Stock

Dorman 624-551 Transmission Oil Cooler Line for Select Ford / Lincoln Models

  • Reliable replacement – this automatic transmission oil cooler hose is precision-engineered to replace the stock hose assembly on specific vehicles.
  • Quality construction – manufactured from metal and rubber with OE-style fittings to provide a reliable replacement.
  • Excellent value – OE quality at a lower price.
  • Vehicle tested – has undergone on-vehicle testing to ensure quality, proper fit and performance.
  • Ensure fit – to make sure this part fits your exact vehicle, input your make, model and trim level into the Garage.
Check Stock