Best Trailer Hitch Wiring Kit For 2019 Ford

CURT 99306 Class 3 Trailer Hitch 2-Inch Receiver 4-Pin Wiring Harness Select Honda CR-V

  • COMPLETE KIT. This towing kit includes a class 3 hitch with hardware and a wiring harness to provide a complete kit for outfitting your vehicle for....
  • DEPENDABLE STRENGTH. This trailer hitch is rated for 3, 500 lbs. gross trailer weight and 350 lbs. tongue weight (limited to lowest-rated towing....
  • VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing....
  • RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid Bonderite and highly durable black....
  • EASY TO INSTALL. No cutting! No splicing! The trailer wiring harness in this kit plugs into existing factory wiring on your vehicle and equips it with....
Check Stock

CURT 121303 Class 2 Trailer Hitch with Ball Mount, 1-1/4-Inch Receiver, Compatible with Select Ford, Lincoln, Mercury Vehicles

  • DEPENDABLE STRENGTH. With a strong, welded steel build, this class 2 hitch is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight (limited to lowest-rated towing component).
  • HIGHLY VERSATILE. This class 2 trailer hitch kit has a standard 1-1/4-inch receiver and includes a ball mount with a 3/4-inch hole, allowing you to tow a small trailer or mount a cargo carrier or bike rack (trailer ball sold separately).
  • DUAL-COAT FINISH. For industry-leading rust, chip and UV resistance inside and out, this tow hitch is submersed in a liquid A-coat and co-cured with a durable black powder coat finish.
  • EASY INSTALLATION. This class 2 hitch kit fits select model years of the Ford Country Squire, Ford Crown Victoria, Lincoln Mark VI, Lincoln Town Car, Mercury Colony Park, Mercury Grand Marquis and Mercury Marauder.
  • TESTED FOR SAFETY. Each CURT class 2 trailer hitch design is thoroughly tested at our Detroit facility, using real vehicles in real-world conditions. Our hitches are tested to SAE J684 specs to give you confidence and safety on the road ahead.
Check Stock

CURT 120913 Class 2 Trailer Hitch with Ball Mount, 1-1/4-Inch Receiver, Compatible with Select Ford Fusion, Lincoln MKZ

  • DEPENDABLE STRENGTH. With a strong, welded steel build, this class 2 hitch is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight (limited to lowest-rated towing component).
  • HIGHLY VERSATILE. This class 2 trailer hitch kit has a standard 1-1/4-inch receiver and includes a ball mount with a 3/4-inch hole, allowing you to tow a small trailer or mount a cargo carrier or bike rack (trailer ball sold separately).
  • DUAL-COAT FINISH. For industry-leading rust, chip and UV resistance inside and out, this tow hitch is submersed in a liquid A-coat and co-cured with a durable black powder coat finish.
  • EASY INSTALLATION. This class 2 hitch kit fits select model years of the Ford Fusion and Lincoln MKZ.
  • TESTED FOR SAFETY. Each CURT class 2 trailer hitch design is thoroughly tested at our Detroit facility, using real vehicles in real-world conditions. Our hitches are tested to SAE J684 specs to give you confidence and safety on the road ahead.
Check Stock

CURT 11405 Class 1 Trailer Hitch, 1-1/4-Inch Receiver, Fits Select Ford Mustang

  • DEPENDABLE STRENGTH. With a strong, welded steel build, this class 1 hitch is rated for 2,000 lbs. gross trailer weight and 200 lbs. tongue weight (limited to lowest-rated towing component).
  • HIGHLY VERSATILE. Add useful, versatile towing options to your vehicle with this class 1 trailer hitch. It provides a standard 1-1/4-inch x 1-1/4-inch receiver hitch, allowing you to tow a small trailer or mount a cargo carrier or bike rack.
  • DUAL-COAT FINISH. For industry-leading rust, chip and UV resistance inside and out, this aftermarket tow hitch kit is submersed in a liquid A-coat and co-cured with a durable black powder coat finish.
  • EASY INSTALLATION. This class 1 hitch is designed to factory fit select model years of the Ford Mustang.
  • TESTED FOR SAFETY. Each CURT class 1 trailer hitch design is thoroughly tested, using real vehicles in real-world conditions. Our hitches are tested to SAE J684 specifications for safety on the road ahead.
  • Hitch, pin and clip, Ballmount not included.
  • Limited Lifetime Warranty to original purchaser.
Check Stock

Curt 13186 22272 Class 3 Trailer Hitch with 2 Inch Receiver and 2 Inch Rubber Hitch Tube Cover Bundle for 13-19 Ford Escape

  • Compatible with 2013 Ford Escape S, SE, SEL / 14-17 Escape S, SE, Titanium / 18-19 Escape S, SE, SEL, Titanium.
  • Kit Contains: (Part Number: 13186): Class 3 Trailer Hitch // (Part Number: 22272): Rubber Hitch Tube Cover.
  • Class 3 Trailer Hitch Details: (Part Number: 13186): Rated to 3,500 lbs. gross trailer weight and 350 lbs. tongue weight // Compatible with weight....
  • Class 3 Trailer Hitch Details: (Part Number: 13186): Co-cured in a rust-resistant liquid Bonderite coating, inside and out // Equipped with an....
  • Rubber Hitch Tube Cover Details: (Part Number: 22272): Protects 2" x 2" receiver tube opening when not in use // Adds a clean, finished look and keeps....
Check Stock

CURT 21728 Rubber Trailer Hitch Cover with 4-Way Flat Wiring Holder, Fits 2-Inch Receiver

  • RELIABLE PROTECTION. Trailer hitch covers are the ideal way to protect your hitch receiver when not towing. It protects the receiver against dirt, water, debris and rust, while adding a finished look to your vehicle.
  • WIRING HOLDER. This trailer hitch receiver cover comes with an integrated holder bracket to securely and conveniently mount your vehicle's 4-way flat trailer wiring connector, keeping it protected and on-hand whenever needed.
  • STANDARD FIT. CURT trailer hitch covers come in industry-standard sizes to fit virtually any trailer hitch receiver. This hitch cover is designed to fit a 2-inch x 2-inch receiver tube, perfect for most class 3, class 4 and class 5 hitches.
  • CONVENIENT. To eliminate the need for tools or additional components, this trailer hitch cap installs with a friction fit. There is no need for a hitch pin or clip.
  • LONG-LASTING. This trailer hitch cover is made from quality black rubber, meaning it will never rust or corrode, in spite of frequent exposure to rain, snow, mud and other elements.
Check Stock

CURT 56020 Vehicle-Side Custom 4-Pin Trailer Wiring Harness, Fits Select Ford E-150, E-250, E-350 Super Duty

  • EASY TO INSTALL. No cutting! No splicing! This trailer wiring harness kit plugs into existing factory wiring on your vehicle and equips it with a standard, rear 4-pin trailer wiring connector for plugging in and towing a trailer.
  • STANDARD CONNECTOR. This plug-in 4-flat trailer wiring can be used to connect trailer tail lights, brake signal lights and turn signals. 4-way trailer light wiring is popular on a variety of trailers, adding versatile towing options for your vehicle.
  • VEHICLE-SPECIFIC. This aftermarket, vehicle-trailer wiring harness is designed for select years of the Ford E 150, E 250 and E 350 Super Duty.
  • EASY GRIP. Plugging in your trailer wiring and trailer lights is easy with the ergonomic design of this vehicle socket. It features tabs on the top and bottom for a better grip when plugging into your trailer or unplugging.
  • DUST COVER. To promote long-lasting use and weather resistance, this 4-pole trailer lighting wire harness comes with a rubber dust cover. It easily fits onto the 4-way flat connector when not in use, protecting it against the outdoor elements.
Check Stock

CURT 56413 Vehicle-Side Custom RV Blade 7-Pin Trailer Wiring Harness Fits Select Ford F-150 Black

  • EASY TO INSTALL. No cutting! No splicing! This trailer wiring harness plugs into existing original equipment wiring on your vehicle and equips it with....
  • HEAVY-DUTY CONNECTOR. The 7-way trailer wiring assembly can be used to connect trailer taillights, brake lights, reverse light signals, turn signals,....
  • VEHICLE-SPECIFIC. This vehicle-trailer wiring harness package is designed for select models of the Ford F-150.
  • DURABLE CONSTRUCTION. For long-lasting use and a reliable connection, the housing of the 7-pin vehicle wiring socket is made from durable black molded....
  • SPRING-LOADED COVER. To promote long-lasting use and weather resistance, this 7 pin trailer wiring harness kit comes with a spring-loaded dust cover.....
Check Stock

CURT 56040 Vehicle-Side Custom 4-Pin Trailer Wiring Harness, Fits Select Subaru Ascent, Forester, Outback, Crosstrek, XV , Black

  • EASY TO INSTALL. No cutting! No splicing! This trailer wiring harness kit plugs into existing factory wiring on your vehicle and equips it with a standard, rear 4-pin trailer wiring connector for plugging in and towing a trailer.
  • STANDARD CONNECTOR. This plug-in 4-flat trailer wiring can be used to connect trailer tail lights, brake signal lights and turn signals. 4-way trailer light wiring is popular on a variety of trailers, adding versatile towing options for your vehicle.
  • VEHICLE-SPECIFIC. This aftermarket, vehicle-trailer wiring harness is designed for select years of the Ford Transit 150, Transit 250, Transit 350 and Transit 350 HD.
  • RELIABLE POWER. This 4-way trailer wiring harness is built with surface mount technology. This type of circuitry generates less heat, optimal light intensity and durable performance.
  • DUST COVER. To promote long-lasting use and weather resistance, this 4-pole trailer lighting wire harness comes with a rubber dust cover. It easily fits onto the 4-way flat connector when not in use, protecting it against the outdoor elements.
Check Stock