Best Trailer Axle Assembly

Rockwell American 3,500 lb Idler Trailer Axle Running Gear (Idler Axle W/Hubs, Bearings, Lugs & Nuts, Springs, U-Bolt Kit, Hanger kit. (89" Hubface, 74" Spring Center)

Rockwell American 3,500 lb Idler Axle - Running Gear Set - Made in the USA.
This Axle Kit Includes: (1) 3,500 lb Idler Axle w/ Hubs, Bearings, Lugs & Nuts (2 Year Manufacturers Warranty), (2) Leaf Springs, (1) U-Bolt Kit, (1) Hanger Kit, (1) 32 oz Johnson Trailer Parts Insulated Mug.
This Axle Comes with a Superior Powder Coated Finish and Posi-Lube Spindles that Provide Continuous Bearing Protection.
5 Lug on 4.5 Bolt Pattern (other bolt patterns available - Contact Johnson Trailer Parts).
Replaces Dexter, Al-Ko & TK Trailer Axles. This Axle Kit is Available in the Sizes Shown in the 3rd Picture, Search "Rockwell American or Johnson Trailer Parts" in Amazon Search Bar for more Trailer Parts.

Check Stock

BISupply Tandem Wheel Ramp – 5.5in Tire Lift Trailer Wheel Jack RV Flat Tire Ramp, Concave Portable Ramp, 1 Pack

TRAILER TIRE CHANGING RAMPS: Use the BISupply Tandem Tire Changing Ramp to lift your vehicle so you can easily change a tire on a tandem axle vehicle by yourself without having to empty your trailer.
These lightweight, high-traction trailer axle jack ramps evenly distribute vehicle weight to protect the integrity of your tires and are ideal for heavy loads.
Can be used on double-axle car, truck, van, or trailer wheels or can be used for storing standard single axle vehicles.
PERFECT SIZE FOR YOUR NEEDS: These utility trailer jack tire ramps are designed to lift tandem axle vehicles with ease and security.
7 inch (17.8 cm) tall van ramp provides a 5.5 inch (14 cm) concaved lift and has a total length of 24 inches (61 cm).
With an 8-inch (20.3 cm) width base and a 10 ton (20,000 lb.) lifting capacity per drive on jack ramp, you will be ready for anything.
Each package includes (1) trailer tire change ramp.
EASILY CHANGE YOUR VEHICLE TIRES: Place the quick jack trailer lift jack ramps on a flat surface in front or behind the good wheel.
Slowly drive the good wheel onto the trailer tire ramp then replace the flat tire.
Drive trailer off of the RV tire changing ramp and tighten lug nuts.
CONCAVE RAMPS PROTECT YOUR TIRES: Whether you are storing you....

Check Stock

Rockwell American 3,500 lb Standard Idler Trailer Axle - 85" Hubface, 70" Spring Center - Bolt Pattern 5x4.5 (Idler Axle W/Hubs, Bearings, Lugs & Nuts)

Complete Rockwell American 3,500 lb Idler Axle - Made in the USA.
3,500 lb Idler Axle Hubs, Bearings, Lugs & Nuts (2 Year MFG Warranty) & (1) 32 oz Johnson Trailer Parts Insulated Mug.
This Axle Comes with a Superior Powder Coated Finish and Posi-Lube Spindles that Provide Continuous Bearing Protection.
5 Lug on 4.5 Bolt Pattern (other bolt patterns available - Contact Johnson Trailer Parts).
Replaces Dexter, Al-ko & TK Trailer Axles. This Axle Kit is Available in the Sizes Shown in the 3rd Picture - Search "Johnson Trailer Parts or Rockwell American" in Amazon Search Bar for more Trailer Parts.

Check Stock

Rockwell American 3,500 lb Standard Idler Trailer Axle - 61" Hubface, 46" Spring Center - Bolt Pattern 5x4.5 (Idler Axle W/Hubs, Bearings, Lugs & Nuts)

Complete Rockwell American 3,500 lb Idler Axle - Made in the USA.
3,500 lb Idler Axle with Hubs, Bearings, Lugs & Nuts (2 Year MFG Warranty) & (1) 32 oz Johnson Trailer Parts Insulated Mug.
This Axle Comes with a Superior Powder Coated Finish and Posi-Lube Spindles that Provide Continuous Bearing Protection.
5 Lug on 4.5 Bolt Pattern (other bolt patterns available - Contact Johnson Trailer Parts).
Replaces Dexter, Al-ko & TK Trailer Axles. This Axle Kit is Available in the Sizes Shown in the 3rd Picture - Search "Johnson Trailer Parts or Rockwell American" in Amazon Search Bar for more Trailer Parts.

Check Stock

The ROP Shop Trailer Axle Kit Assembly with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

Replacement Trailer Axle Kit Assembly with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
Includes - (1) Idler Hub with Lug Nuts, (1) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (2) Inner/Outer Bearings, (1) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (1) 2" Grease/Dust Cap.
Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".

Check Stock

3.5k-3500 Lb Capacity Trailer Axle Beam Only-Utility/RV/Boat (89\ Hubface-74 Spring Center)

Rockwell American Tandem 3,500 lb Electric Brake Trailer Axles - Running Gear Set (7,000 lb Capacity) - Made in the USA.
These Axles Comes with a Superior Powder Coated Finish and Posi-Lube Spindles that Provide Continuous Bearing Protection.
This Tandem Axle Kit comes with: (2) 3,500 lb Capacity Electric Brake Axle with Hubs, Bearings, Lugs & Nuts (2 Year Warranty), (2) U-Bolt Kits, (1) Tandem Hanger Kit, (4) Double Eye Springs, (1) 32 oz Johnson Trailer Parts Insulated Mug.
5 Lug on 4.5 Bolt Pattern (other bolt patterns available - Contact Johnson Trailer Parts).
Replaces Dexter, Al-ko & TK Trailer Axles. This Axle Kit is Available in the Sizes Shown in the 3rd Picture - Search "Johnson Trailer Parts or Rockwell American" in Amazon Search Bar for more Trailer Parts.

Check Stock

LIBRA 3500lb Single Trailer Axle Suspension Kit 1750lb Leaf Springs & Ubolt Kit

1,750lbs capacity per each spring, for standard 3,500lbs trailer axle,Eye to Eye length: 25-1/4 inch, Free open: 3 inch, width of leaf: 1-3/4 inch, 4 leaves, 9/16 inch bushing dia, nylon bushings installed.
It will replace SW4B / 72-42 / LIB-401-DE / UNA212 / PR4B / 124903 / 9150014 / 93184 (different SKU# but same spring).
Include 3,500lbs axle U-bolt kit for 2-3/8" dia round trailer axles , Kit include: 4 x 5-1/2" long U bolts, U bolts dia. 1/2".
LIBRA has been supplying US OEM trailer industry for over 16 years, reliable and quality parts trusted by major trailer & trailer axle manufacturers..

Check Stock

LIBRA 3500lb Single Trailer Axle Suspension Kit 1750lb Leaf Springs & Hanger Kit

1,750lbs capacity per each spring, for standard 3,500lbs trailer axle,Eye to Eye length: 25-1/4 inch, Free open: 3 inch, width of leaf: 1-3/4 inch, 4 leaves, 9/16 inch bushing dia, nylon bushings installed.
It will replace SW4B / 72-42 / LIB-401-DE / UNA212 / PR4B / 124903 / 9150014 / 93184 (different SKU# but same spring).
Include Complete single trailer axle hanger kit for 1-3/4" leaf springs, Kit include: 2 x 3" tall hangers, 2 x 2.1" tall hangers, 4 x shackle straps (eye to eye 3.09"), 6 x 9/16"-18 x 3" long shackle bolts and locknuts.
LIBRA has been supplying US OEM trailer industry for over 16 years, reliable and quality parts trusted by major trailer & trailer axle manufacturers..

Check Stock

10k-10000 Lb Capacity Electric Drum Brake Trailer Axle 8 Lug-Dexter Compatible (Assembled Brake Axle)

Rockwell American Tandem 5,200 lb Electric Brake Trailer Axles - Running Gear Set (10,400 lb Capacity) - Made in the USA.
These Axles Comes with a Superior Powder Coated Finish and Posi-Lube Spindles that Provide Continuous Bearing Protection.
This Axle Kit Includes: (2) 5,200 lb Capacity Electric Brake Axle with Hubs, Bearings, Lugs & Nuts (2 Year Warranty), (2) U-Bolt Kits, (1) Tandem Hanger Kit, (4) Double Eye Springs, (1) 32 oz Johnson Trailer Parts Insulated Mug.
Replaces Dexter & Al-Ko Trailer Axles. This Axle Kit is Available in the Sizes Shown in the 3rd Picture, Search "Rockwell American or Johnson Trailer Parts" in Amazon Search Bar for more Trailer Parts.

Check Stock