Best Track Jack 15 Ton

BAOSHISHAN 4 Ton Bottle Jack Double Ram 6-1/4\ to 15-3/8\ Lifting Range Hydraulic Jack Car Jack Portable with Carrying Case

  • [DOUBLE RAM] - The double-ram design plus extension screw top means you have 3 stages of lifting stroke, which has a better range of motion than a traditional single ram 4 ton bottle jack..
  • [BETTER RANGE OF MOTION] - The 6-1/4" starting height allows stubby bottle jack to fit most car clearance, and it has a double ram design with extension screw, which would fully extend up to 15-3/8"..
  • [WITH CARRYING CASE] - The double ram bottle jack with case is easy enough to store away in the vehicle or garage. And the color of the compact box is random, BLACK or GRAY. If the box you received is damaged, please do not hesitate to contact after-sales service to replace it..
  • [SAFETY VAVLUE] - Each jack is tested for safety. The secure valve will automatically protect jack hydraulic system when overload. Equipped with a high-quality, glide-action pressure pump which is designed to lift with min effort..
  • [SCREW TOP] - Don't forget to screw the 2-3/8" tip up before using the 4 ton jack. It allows the hydraulic jack to be adjusted to accommodate desired work height while X-shaped top adds versatility. Thickened steel base increases stability and strength..
  • [WARRANTY] - BAOSHISHAN provides ONE-year Warranty for the double ram jack. If there is any oil leakage, damage or ma....
Check Stock

BIG RED T82001S Torin Hydraulic Trolley Service/Floor Jack Combo with 2 Jack Stands and Blow Mold Carrying Storage Case, 2 Ton (4,000 lb) Capacity, Red

  • Combo kit includes: (1) 2-ton trolley jack, (1) jack handle, (2) 2-ton jack stands, and (1) blow mold case.
  • 2-ton trolley jack features 360-degree rotating saddle, positive locking safety release handle, and rear swivel casters.
  • Integrated overload protection valve prevents you from lifting items weighing more than the jack's capacity.
  • Jack stands have automatic locking pawl and tooth design for extra protection.
  • Trolley jack rated up to 4,000 pounds capacity with lifting range of 5.5-inches to 13.4-inches.
  • jack stands rated to 4,000 pounds capacity with support range of 10.8-inches to 16.5-inches.
Check Stock

OEMTOOLS 24835 Hydraulic Floor Jack, 2.5 Ton Low Profile Automotive Jack, Quick Vehicle Lift Up to 14 Inches, Portable Hydraulic Lift, Fits Under Nearly Any Vehicle

  • HYDRAULIC CAR LIFT: The hydraulic jack is designed to lift 2.5 ton vehicles with minimal effort when performing services or maintenance work.
  • Hydraulic jack lift is built for performance and ease of use.
  • Valuable shop floor jack or garage floor jack.
  • LOW PROFILE FLOOR JACK: Our low profile car jack makes working with low-clearance vehicles much easier, getting under vehicles that standard hydraulic car jacks cannot fit.
  • These low profile floor jacks have a maximum lifting height of 14 inches.
  • SAFE TO USE: These floor jacks for cars, trucks, SUVs, and many other vehicles feature an overload system that prevents use beyond the rated capacity of 2.5 tons.
  • 2.5 ton floor jack can safely fit under and lift nearly any vehicle within its capacity.
  • PORTABLE CAR JACK: This car lifter jack comes with floor jack casters for convenient portability.
  • Heavy duty floor jack features (2) 360 degree rear swivel casters for easy maneuvering.
  • Easily transport this portable car lift around your garage.
  • PRODUCT SPECIFICATIONS: (1) Vehicle Hydraulic Jack.
  • (2) 360 Degree Rear Swivel Casters and (2) Large Front Casters.
Check Stock

US JACK D-51126 20 Ton Bottle Jack Made In USA

  • OTC's 8-Ton Bottle Jack features a rugged forged cylinder and base to ensure strength and prevent leaks, along with a chromed pump piston and ram for additional rust resistance.
  • In-line design (pump mechanism centered on the cylinder) makes the jack much easier operate and manuever into position with the handle compared to offset designs.
  • Specifications include: 4-15/16 inch long stroke, 7-13/16 inch minimum retracted height, 15-3/4 inch maximum height with screw extension, 3 inch long screw extension.
  • 1-3/8 inch diameter saddle, 3-9/16 inch x 6 inch rectangular base.
  • OTC bottle jacks will provide years of reliable service, but eventally time and use will require new seals so every OTC bottle jack includes a free, life extending, seal kit.
Check Stock

AKRON PRODUCTS C-4 Floor Jack, 1 Pack

  • [Make Structural Repairs]: The BISupply Adjustable Shore Jack Post House Support Jacks 1-Pack transforms 4x4 inch (10.2 cm) square lumber into a temporary support or non-primary support (not intended for permanent installation).
  • [Adjust the Size]: Fits bottom of a 4x4 inch timber post of any height.
  • 4-inch height adjustment thread for shoring tension.
  • 14.5 to 18.5 inch (36.8-47 cm) overall lifting shore height.
  • 3.5x6 inch (8.9x15.2 cm) base plate with (4) 0.6-inch/15mm and (2) 0.3-inch/8mm mounting holes.
  • [Built to Last]: Constructed from coated steel for strength and longevity that resists rust and corrosion.
  • Square tube, round tube, and threaded plate welded to create singular floor joist jack post unit.
  • Load capacity up to 24,700 pounds / 12.4 ton (11,204 kg / 11.2 MT) dependent on 4x4 used.
  • [Stabilize Easily]: Place adjustable shoring jack on end of 4x4 inch wood post, secure post to shore jack, turn the tension handle for 4 inches of height adjustment, and secure 4x4 shore jack base (4x4 lumber required, not included.
  • nails/wood screws recommended, not required or included).
  • [Fit Anywhere]: 11.8x0.4 inch (30x1 cm) horizontal tension handle is removable and slides for use against an obstruction.
  • Base plate includes (4) 0.6-inch/15mm and (2) 0.3-....
Check Stock

K Tool International 50 Ton Blue Air Hydraulic Truck Jack HD KTI63198

  • [50-TON CAPACITY] - K tool International service jack rated to lift up to 50 tons or 100,000 lbs..
  • [LIFTING RANGE] - K Tool 50 ton jack has a lifting range from 11.4" to 21.25". Service Jack provides the opportunity for many automotive/truck needs..
  • [BUILT-IN BY-PASS] - K Tool truck jack includes a built-in by -pass device to protect hydraulic system from over pumping damage..
  • [LONG PUMP HANDLE] - Long pump handle with release knob. Works independently of handle position. Handle locks in both vertically at 45 degree angle and horizontally..
  • [NARROW WIDTH] - Truck jack narrow width allows jack to fit between tandem wheels..
Check Stock

BEETRO 3 Ton Electric Car Jack 12V Scissor Jack Lift with Electric Wrench, Electric Jack for Car Sedan SUV Tire Changing

  • RATED CAPACITY : The maximum load capacity of BEETRO car jack is up to 3 ton(6600 pounds), lifting height is 5.5 -16.54 inches. Two removable raised heads are respectively designed for vehicles of different heights, suitable for most vehicles under 3 ton, Sedan, SUV, MPV etc. NOTES: Never used the jack on sloped ground. Never use it on truck or over 3 ton vehicles. Start car engine before operation,ensure sufficient electricity..
  • TWO WAY POWER SUPPLY : This 12v jack is cigarette lighter or car battery powered, and comes with a 11.5 foot power cable, long enough to go through the 4 tires without changing the power source..
  • EASY TO USE : Electric scissor jack is simple to operate, just press 2 switches to lift or lower your car, get rid of laborious and tedious manual working. It just takes about 2 minutes to lift a car, greatly cut repairing time. Perfect for car's owners change tire in emergency, especially best choice for women..
  • HIGHER SECURITY: This 3 ton scissor jack adapts heavy-duty steel construction which features to strong bearing capacity and distortion resistance. It will automatically stop lifting when it r....
Check Stock

2 Ton Heavy Duty Floor Jack, Lifting Range 5-1/8\ to 13\

  • Floor jack has a 2 ton (4,000 lb) load capacity and features a minimum lifting height of 5-1/8 and a maximum height of 13".
  • The 2ton floor jack jack equipped with (2) large steel casters and (2) 360-degree swivel casters for smooth maneuverability.
  • The floor jack has a large saddle surface area for better contact with the load being supported.
  • Heavy duty steel construction provides long term durability，Built-in safety valve provides overload protection.
  • Service jack is built for extra lifting and maneuverability for all load lifting needs. Heavy-duty steel construction provides stability and positioning..
Check Stock

Chamber Wax Pen Red

  • 14000 psi Ram Hydraulic Jack Ensures Successful Pressing at Relatively Low....
  • Leak-Free Removable Hydraulic Bottle Jack for Easy Replacement.
  • Reinforced Jack Handle to Add Strength and Durability.
  • Upgraded Body Frame to Hold Up To 12-Ton Force.
  • Ergonomic Handle Design Allows You to Move the Press Conveniently.
Check Stock