Best Torque Servo Motor

ACEIRMC SG90 Servo Motor Micro Servo 9G Servo Motor for RC Robot Arm Helicopter Airplane Remote Control (5 Pcs) (5pcs)

SG90 9G micro servo motor for remote control helicopters, micro robot, robot arm and boats. Fit for ALL kind of R/C Toys and also make electronics DIY based on compatible for Arduino ,Raspberry Pi.
The SG90 mini servo motor is lightweight, high-quality and lightning-fast.The servo is designed to work with almost all the radio control systems..
SG90 Micro Servo Motor compatible for Mini Arduino Servo SG90 9g Servo Kit for RC Helicopter Airplane Car Boat Robot Arm/Hand/Walking/Servo Door Lock Control with Cable.
The SG90 has 3 wire interfaces in which the connections should be made as follows: Red wire-5V, Brown Wire-Ground, Yellow wire-digital pin 9..
Stall Torque (4.8V): 17.5oz /in (1kg/cm).

【Motor Servo】- This 30kg servo offers a full range of 180° with metal gears..
【Large Torque】Operat Voltage: 4.8V - 7.4V, no load speed: 0.24sec/60° - 0.17sec/60°, peak stall torque: 29.5kg.cm - 32kg.cm..
【High Quality】- High performance digital standard servo,equipped with strong gears,Dual ball bearings.
【Application 】- Digital servo can be a common use for robots, mechanical arms, climbing cars and remote control toys..
【Accessories 】Connector wire length 12.6 inches(32cm),and also send with a 25T metal servo arm.

1.Waterproof Servo: IP67 high waterproof grade allows you to play your RC model in drippy environments..
2.High Torque and Voltage Servo:6.0V -8.4V high oprate voltage.This 45kg waterpoof steering servo's maximum torque is up to 45 kg/[email protected],controllable angle range from 0 to 180 degrees..
3.Full Metal Gear Coreless Servo:Equipped with stainless steel gears,full CNC aluminium shell,less noise,light weight.Dual ball bearings.Excellent linearity,high speed servo precision control..
4.Widely Use Servo Motor:Compatible with 1/5,1/6,1/8,1/10,1/12 Scale Clawer Truck,TRX6,scx10,RC Car/Robot/Boat/Mechanical Arm/Quadcopter and other remote control models..
5.Standard Dimension RC Servo: 1.57 x 0.78 x 1.91 inch(40 x 20 x 48.6 mm).
Weight:2.65oz (75g).with 25T Metal Servo Horn..

This MG996R Servo motor which updated from SG90 and MG90S micro servo motor. (the Speed, Tension and Accuracy all increase)..
The MG996R model compliant with most standard receiver connector,for Futaba, Hitec, Sanwa, GWS etc..
Power Supply: Through External Adapter. Stable and Shock Proof. Coreless Motor, Metal Gear..
Torque at 6V 12kg/cm, 7.2V 13kg/cm.(Recommended voltage: 5V, current usage: 3A ). Positioning speed at 4.8V without load 0.17s / 60 degrees..
Universally Applicable: Micro Servo Motor for 1:10 RC car robot helicopter servo remote controlled aircraft and suitable for most DIY projects..

WHY CHOOSE IT: This MG996R Servo motor which updated from SG90 and MG90S micro servo motor. (the Speed, Tension and Accuracy allincrease).This high-speed standard servo motor can rotate 180 degrees (90 in each direction)..
WIDE APPLICATIONS: The MG996R Servo model Good performance digital standard servo, compliant with most standard receiver connector,for Futaba, Hitec, Sanwa, GWS etc. Which can be a common use for robots, mechanical arms, climbing cars and remote control toys..
ELECTRICAL SPECIFICATION: The MG996R Servo Torque at 4.8V 13.5kg/cm, 6V 15.2kg/cm. Positioning speed at 4.8V without load 0.17s / 60 degrees.
6.0V without load 0.15s / 60 degrees. Recommended voltage: 5V, current use: 3A..
STABLEPERFORMANCE：Stable and shock-proof iron core motor, metal gears, power supply through external adapter..
Tips: If you’re not completely satisfied for any reason, simply return it or contact us.Your 100% satisfaction is our goal..

【High Quality】100% new, good quality, AD002 Micro servo motor, Compatible with MG90 servo motor..
【Full Metal Gear】 Metal gear with less noise,the metal gears help with the movement,these will rotate the proper direction..
Operating Speed: 0.11 seconds/60 degrees(4.8V).The servo Maximum angle is 180..
【Wide Application】The great micro servo motors for helicopter/ boat / robot car / robot arm /remote controlled aircraft DIY. Fit for electronics DIY, compatible with Arduino, Raspberry Pi..
【Service Guarantee】If you encounter any problems during use, please contact us, we will provide solutions to ensure your experience. We will reply within 24 hours.This AD002 servo motor is compatible with all Adeept robots..

【High Quality】100% new, good quality, AD002 Micro servo motor, Compatible with MG90 servo motor..
【Full Metal Gear】 Metal gear with less noise,the metal gears help with the movement,these will rotate the proper direction..
Operating Speed: 0.11 seconds/60 degrees(4.8V).The servo Maximum angle is 180..
【Wide Application】The great micro servo motors for helicopter/ boat / robot car / robot arm /remote controlled aircraft DIY. Fit for electronics DIY, compatible with Arduino, Raspberry Pi..
【Service Guarantee】If you encounter any problems during use, please contact us, we will provide solutions to ensure your experience. We will reply within 24 hours.This AD002 servo motor is compatible with all Adeept robots..

Type: 5pcs Black 25T Aluminum Servo Horn Arm, Ideal Servo Accessories for Hobby Projects DIY. Suitable for power HD servos..
Material: Made from high quality Aluminum alloy, CNC machined for high precision, anodized finish lasting performance. Hard construction, more durable in use..
Special Design: Single sided arm style with 3 predrilled starter holes, 2 threaded linkage holes for adjustable pull rod position, straight arm design for more accurate and powerful turn..
Each steering arm come with 2 fastening screw bolts for spline locking, to secure the split-clamp onto the servo motor output..
Fit for most standard and high torque servo motor, MG995, MG996R, MG946R, S3003 etc. RC Model Motor..

✔20KG Large Torque - 20KG Servo Motor 20.5 kg.cm(4.8V) - 22.8 kg.cm(298.5 oz/in)(7.2V)..
✔270 Degree Rotation - Pulse width signal of 20kg servo motor from 500 to 2500 μsec, well controlled from 0 to 270 degrees. When the input signal is 500usec, the angle is 0 degrees, and at 2500 μsec, the angle is 270 degrees..
✔High Precision - DS3218 20kg digital servo accuracy with precision potentiometers. Excellent linearity, precision control, high quality leads and center nicely..
✔High Rotation Support Waterproof - Waterproof performance: IP66. Metal servo motor accuracy and linearity have been greatly improved! Perfect satisfy the needs of making robots. Also for cars, boats, vehicles and remote control toys and so on..
✔Dimensions - 40*20*40.5mm(1.58*0.79*1.60in).
Weight - 56g±5%(2oz±5%). Operating voltage range: 4.8-7.2V.