Best Torque Cam For M107

Texas Speed TSP Stage 2 Low Lift Truck Camshaft Vortec Truck Cam 3 Bolt Cam 4.8 5.3 6.0 (Camshaft, Springs, Seals, Gaskets and Pushrods)

  • Texas Speed Stage 2 Low Lift 212/218, .550"/.550" 112 LSA Camshaft. With a 112 Lobe Separation Angle (LSA). These camshafts have a 3-bolt timing gear pattern. Includes Camshaft, Beehive Springs, Michigan Motorsports Seals, Cam Install Gasket Kit and Chromoly Pushrods.
  • This cam gained 51.4 HP and 22.9 TQ at the flywheel on the in-house SuperFlow 902 engine dyno using an otherwise stock 5.3L engine!.
  • This cam uses proprietary TSP lobe profiles that are designed to utilize the factory GM LS6 single beehive valve springs and your factory pushrods, making them the most affordable cam package on the market..
  • This is an excellent performance camshaft with a smooth idle! We've had tons of customers select this camshaft when looking for a cam that drives almost stock, and can be hidden with some exhaust systems! If you're looking for a small, stealth camshaft the 212/218 is a great option to consider.. It is ideal for 4.8L and 5.3L trucks that want to keep their factory torque converter and not break the bank on more expensive valve springs and pushrods..
  • These cams are designed specifically for 4.8 5.3 6.0 combinations..
Check Stock

Stainless Steel Panel Screw, Plain Finish, Fillister Head, Slotted Drive, 3/4\ Length, #2-56 Threads (Pack of 10)

  • Used for equipment panels when hardware is subject to loss.
  • Stainless Steel is suitable where formability and cost are important considerations.
  • Fillister head for high torque and good hold-down strength.
  • Phillips drive is designed to cam out under too much torque.
  • Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads.
Check Stock

Stainless Steel Panel Screw, Plain Finish, Fillister Head, Slotted Drive, 1/4\ Length, #4-40 Threads (Pack of 10)

  • Used for equipment panels when hardware is subject to loss.
  • Stainless Steel is suitable where formability and cost are important considerations.
  • Fillister head for high torque and good hold-down strength.
  • Phillips drive is designed to cam out under too much torque.
  • Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads.
Check Stock

Jet Tools CS-315, 315mm 1-Phase Ferrous Manual Cold Saw (414229), Standard

  • DURABILITY: Blade drive reduction gearbox operates in an oil bath..
  • FLOOD COOLANT SYSTEM: 1-1/3 gallon coolant reservoir and pump with flow control system extends blade life..
  • REPEAT CUTS: Fully-adjustable material depth stop for sawing repeatability and increased production..
  • MAXIMUM TORQUE: Hardened and ground direct-drive worm shaft, and bronze worm wheel, transmits maximum torque to the saw blade..
  • BURR-FREE CUTTING: Quick-clamping cam-action vise with adjustable gib and material support bar..
Check Stock

Universal Cam Pulley Holder Tool & Crankshaft Damper Pulley Holding Holder Harmonic Tool for Lexus & Toyota

  • ...V6, 4.0 V8, 4.3 V8, 4.7 V8. Toyota 1996 and later: 3.0 V6, 3.3 V6, 4.0 V6, 4.7 V8. 4 cyl: 1983-1995 22RE, 1995-2004 2RZ & 1995-2004 3RZ..
  • Harmonic Damper Pulley Holder – Prevent the harmonic damper pulley from rotating in the process of removing and setting the final torque specification on the pulley bolt, allowing users to easily remove and install the crank bolt on many Toyota & Lexus engines..
  • Cam Pulley Holder – Great holding tool for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc. Designed with grooved pins to hold camshaft sprockets stationary to remove the bolts, which will work well to hold the pulley to stop it from spinning while tightening/loosening the bolt..
  • SUPERIOR QUALITY – Made of high quality steel with black finish for durability and perfect match, resisting rust and corrosion, ensures a long term service..
  • 100% SATISFACTION GUARANTEE: If you're not 100% satisfied with our tools, simply return it for a full refund in 30 days. Premium Support & 12 Months’ Warranty..
Check Stock

PRO BIKE TOOL 17 in 1 Bike Multitool & Adjustable Torque Wrench Set - 4, 5, 6 NM

  • ...Built to Last multi tool – the Seventeen tool uses precision CNC machined steel tool bits and a lightweight aluminum body to achieve a functional, durable and portable multi-function tool. The perfect multifunctional pocket companion for the open road or trail..
  • Accurate Torque Measurement to 4, 5, 6 Nm.
  • three torque levels to cover most recommended manufacturer tightness settings in one tool. Includes four interchangeable tool bits: 3, 4, 5mm hex / allen and T25 to cover most bike needs - including adjusting stem clamps, seatposts, headsets, handlebars and lever clamps. Please Note: Includes 6mm Allen key to turn dial..
  • A Pocket Workshop - includes tools: Allen / Hex key (mm): 2 | 2.5 | 3 | 4 | 5 | 6 | 8, Star Shaped/Hex Tool (Torx) T25 and Phillips Head 2 (PH2) cross drive, Spoke gauge: 13 | 14 | 15 | 16 | Mavic Spline, Chain Tool 8 to 12 Speed (Splitter) and Bottle Opener! 360 degree tool bit movement. Also includes slim, stylish and discreet bag to safely protect the bike tool..
  • Peace Of Mind - Have you ever worried about over-tightening a bolt and damaging your bike? Remove guesswork and risk with our torque wrench, ....
Check Stock

Brian Tooley Racing BTR Truck Stage 3 Includes Cam, Beehive Springs, Pushrods, Michigan Motorsports Seals Fits Silverado Sierra Vortec 4.8 5.3 6.0 6.2

  • Brian Tooley Racing BTR Stage 3 Truck Cam, Beehive Springs, Michigan Motorsports Seals, 7.400" Chromoly Pushrods 4.8 5.3 6.0.
  • The Brian Tooley Vortec Racing Truck Cam Kit includes: Stage 3 Truck Cam, Beehive Springs, Set of VS LS Hat Seals, 7.400 Chromoly Pushrods.
  • Stage III Camshaft Specs Specs: 218/224 .553/.553 110+0 Requires a 3 bolt timing gear..
  • STAGE 3 SPECIFICS: The Stage 3 V2 camshaft is an amazing all around grind for the truck enthusiast. You sacrifice some low end torque in the pursuit of more power higher in the RPM range, but gain an idle note that is distinctly BTR! Stage 3 grind, it is still a tow-friendly camshaft, just not ideal for the everyday hauler. An aftermarket converter is highly recommended with this grind.Excellent for 4.8 5.3 6.0 6.2 Silverado, Sierra, Yukon, Tahoe, Suburban, Escalade.
  • Will work with stock converter in some trucks, but recommended to install a 2800-3000 converter for best overall performance..
Check Stock

Hi-Spec 44 Piece 1/4” Hex Shank Impact Driver Screw Bit Set S2 Steel Screwdriving for Drill Drivers

  • RAPID DIY: Drive into hard surfaces and turn tight nuts with the Hi-Spec Impact Driver Screw Bit Set.
  • HIGH TORQUE: Outperforms standard Cr-V bits when maximum torque is delivered in hard-stop fastening.
  • SET FOR LIFE: Get essential bits including Torx, Pozidriv, Hex Allen with HVAC nut drivers and more.
  • FOR IMPACT: Machined tips reduce stripping and cam-out. A torsion zone distributes excessive stress.
  • TEMPERED: S2 shock-resistant steel and protective phosphate coatings improve ductility and hardness.
Check Stock

PRO BIKE TOOL 20 in 1 Bike Multitool & Adjustable Torque Wrench Set - 4, 5, 6 NM

  • Built to Last multi tool – the Twenty tool uses precision CNC machined steel tool bits and a lightweight aluminum body to achieve a functional, durable and portable multi-function tool. The perfect multifunctional pocket companion for the open road or trail..
  • Accurate Torque Measurement to 4, 5, 6 Nm.
  • three torque levels to cover most recommended manufacturer tightness settings in one tool. Includes four interchangeable tool bits: 3, 4, 5mm hex / allen and T25 to cover most bike needs - including adjusting stem clamps, seatposts, headsets, handlebars and lever clamps. Please Note: Includes 6mm Allen key to turn dial..
  • A Pocket Workshop - includes tools: Allen / Hex key (mm): 2 | 2.5 | 3 | 4 | 5 | 6 | 8, Torx T25 and T30, Phillips Head 2 (PH2), Flat Head 5, Spoke Wrench: 3.2mm | 3.5mm | Mavic M7 and M9, Wrench (mm): 8 | 9 | 10, Chain Tool 8 to 12 Speed (Splitter) and Valve Core Tool! 360 degree tool bit movement. Also includes slim, stylish and discreet bag to safely protect the bike tool..
  • Peace Of Mind - Have you ever worried about over-tightening a bolt and damaging your bike? Remove guesswork and risk with our torqu....
Check Stock