Best Top 3 In 1

Prime-Line N 6847 Pocket Door Roller Assembly, 3/4 inch, FLAT, Plastic Wheels on Steel Bracket (2-pack)

  • Please refer to the line art drawing and compare with your existing roller assembly before purchase.
  • Used on Johnson and a variety of other bypass and pocket closet doors.
  • Top hung and center mounted Tricycle design.
  • Features a 3/4 in. flat rollers for smooth and long lasting quiet operation.
  • Threaded rod installs into bracket at top of door.
  • Used as a top roller assembly on pocket door systems.
  • 5/16 in. x 1-1/4 in. outside diameter on 2-1/2 in. x 1-3/8 in. base.
  • Constructed of a plastic wheel with steel ball bearings, assembled to a steel bracket housing.
Check Stock

BETOOLL A-Frame 2 Brackets Swing Set Bracket with Mounting Hardware (Green)

  • The Strongest Brackets to Build A Swing Set---Made of heavy gauge steel, 100% welded joints,heavy and durable.Also painted nicely to stay rust free for a good looking swing set for years to come..
  • What You Get--- 2 swing set brackets ,28pcs wood screws and 28pcs washers.BETOOLL frame brackets set includes screws and washers required to install them!Also come with our 18-month customer service..
  • Making A Seriously Sturdy A-frame in the Easiest Way---We recommend using one kiln-dried 4x6-114" top beam (with a true measurement of 3-1/2" x 5-1/2") and four kiln-dried 4x4-96" (with true measurements of 3-1/2" x 3-1/2") side support legs to construct a basic A-Frame which completed dimensions:12'Lx8'Dx7'8"H.(Lumber is not included in this kit.).
  • Easy Install---First attach the swing set brackets to 4x6 top beam.Then simply slide the 4x4 legs into the brackets with the beam lying on the ground (top down).Pre-drill the holes for the lag screws and ratchet them down.Also you could add a 2x4 cross piece on the legs for added stability.
  • NOTE!!!!! The bracket openings measure 3-5/8" x 5-5/8" and 3-5/8" x 3-5/8". Make sure the length of 4x6 top beam is shorter than 114.
Check Stock

2) Kicker CSC674 6.75\ 600w Car Audio Speakers 2) CSC6934 6x9\ 900w Speakers

  • Pair KICKER 46CSC674 6.75" 6-3/4" 300w 4-Ohm Car Audio Coaxial Speakers . Speaker Design: 2 - way. Woofer Size: 6 3/4 in. (165 mm). Tweeter Size: 1/2 in. (13 mm). DC Resistance: 3.3 ohms. Peak Power: 300 Watts per speaker / 600 Watts per pair..
  • Effective Frequency Range: 40Hz - 20kHz. Mounting Hole Diameter: 5 1/2 in. (140 mm). Top Mount Depth: 3/16 in. (4 mm). Bottom Mount Depth: 1 13/16 in. (47 mm). Grilles: Yes. Tweeter Magnet Material: Neodymium..
  • Pair KICKER 46CSC6934 6"x9" 6x9 450 Watt 4-Ohm 3-Way Car Audio Speakers . Speaker Design: 3 - way. Woofer Size: 6x9 in. (160x230 mm). Mid Size: 2 in. (50 mm). Tweeter Size: 1/2 in. (13 mm). DC Resistance: 3.5 ohms..
  • Peak Power: 450 Watts per speaker / 900 Watts per pair. Continuous Power (RMS): 150 Watts per speaker / 300 Watts per pair. Sensitivity: 92 dB @ 1W, 1m. Effective Frequency Range: 30Hz - 20kHz. Mounting Hole Diameter: 5-5/8 x 8-7/16 in..
  • Top Mount Depth: 7/16 in. (12 mm). Bottom Mount Depth: 3 3/16 in. (81 mm). Tweeter Protrusion 1/16 in.(1 mm). Grilles: Yes. Tweeter Magnet Material: Electric Crystal Motor. Tweeter Dome Material: PEI (polyether imide)..
Check Stock

Case of 1000 Paper Food Trays, Popcorn, Nacho, Burger (Size 25, 1/4 lb)

  • Size 25, 1/4 lb TOP Dimension 4.45"x 3.38", Depth 1.02", Bottom Dimension 3.07"x 1.89".
  • Size 50, 1/2 lb TOP Dimension 5.2"x 3.82", Depth 1.26", Bottom Dimension 3.54"x 2.05".
  • Size 100, 1 lb TOP Dimension 5.7"x4.13", Depth 1.57", Bottom Dimension3.82"x 2.16".
Check Stock

ALFI brand AB5123 32-Inch Short Wall Double Bowl Fireclay Farmhouse Kitchen Sink with 1 3/4-Inch Lip, White

  • Bottom Width:30 1/2" Top Width 31 3/4" . This sink tapers from top to bottom by 5/8".
  • 1 3/4" Lip surrounding the top edge on all 3 sides.
  • Bowl Dimensions 14 3/4" x 16 1/4" x 7 1/4".
Check Stock

Tosnail Set of 3 Non-Stick Round Cake Pan with Removable Bottom - 6 Inch 8 Inch and 9.5 Inch

  • Package includes 3 different size round cake pan with removable bottoms. These pans are not straight side, the top is wider than the bottom..
  • Outer Size: Large is 10-1/4" top dia. x 2-3/4".
  • Small is 6-5/8" top dia. x 2-1/8". Inner Size: Large is 9-1/2" top....
  • Constructed of durable carbon steel with nonstick coating for effortless release and clean..
  • Dishwasher Safe! Recommend hand wash in warm, soapy water before first and after each use..
  • Great for baking cake, layer cake, cheesecake, deep dish pizza, pie and more for weddings, birthdays, anniversaries, party or home baking!.
Check Stock

Bedz King Stairway Bunk Beds Twin over Twin with 3 Drawers in the Steps and 2 Under Bed Drawers - White

  • Can be separated into two twin size beds. Please keep in mind that the top bunk foot board will have the gap that is the entryway for the stairway..
  • Built-in stairway instead of ladder for easy access to the top bunk, with 3 drawers built into the stairway and 2 under bed drawers..
  • Total Dimensions: 61 1/2" H x 102 1/2" W x 42 1/2" D. | Bottom bunk is approx 11 inches off the floor | Space between bottom bunk slats and top bunk slats (excluding the mattress) is approx 31 1/2 inches..
  • Internal measurements of stairway drawers are approx 8 1/4" H x 17 3/4" W x 15 1/4" D.
  • Internal dimensions of under bed drawers are approx 6 3/4" H x 34 1/2" W x 22" D.
  • Weight limit: 175 pounds for the top bunk, 200 pounds for the bottom bunk and 175 pounds for the trundle..
  • Finish is child-safe, bunk bed is made from solid Brazilian pine from sustainable plantations - no particle board.
  • Sale is for Twin over Twin Stairway Bunk Bed with 2 Under Bed Drawers, Mattress not included..
Check Stock

Pinewood Pro Tungsten Canopy Weight for Derby Cars one 2.5oz Canopy

  • Polished Tungsten Canopy Weight for Derby Cars 2.5oz.
  • EASY to install - just drill 3/8" hole, glue and insert.
  • Feature and usage: tungsten canopy weight top is rounded, bottom is 3/8 inch diameter cylinder stud and 1/4 inch tall.
  • derby canopy weight's top is 1-1/2 inch in length, 1 inch in width, 1/4 inch tall.
  • Make precise placement of weight in your car for adding speed.
Check Stock

Mudder 36 Pack Zipper Replacement Zipper Repair Kit, Silver

  • Model 1 and model 2 can be applied to 7 mm zipper, model 3 and model 4 can be applied to 5 mm zipper.
  • Note: the product model can be viewed in picture 3, please use a measuring tool to confirm the size of the zipper before purchasing.
  • Model 1 and model 2: (7 mm metal teeth slider, 3 pieces for each model).
  • Model 3 and model 4: (5 mm metal teeth slider, 3 pieces for each model).
  • When repairing the zipper, please refer to the operation guide on page A+ or picture 4.
  • Model 1 and model 3 zipper replacement only can be applied to the metal zipper.
  • Model 2 and model 4 can be applied to the resin and plastic zipper.
  • Note: material mismatch can easily cause product damage and break.
  • 12 x Bottom stoppers (6 mm bottom stopper x 6, 5mm bottom stopper x 6), 12 x top stoppers (4 mm top stopper x 6, 3 mm top stopper x 6).
  • It fits for jeans, skirts and slacks, purses, sweatshirts and jackets, etc. Suitable for zipper thickness between 2.5 mm and 3.5 mm. Please confirm the material of the zipper before purchasing.
Check Stock