Best Ton Floor Jack 2

Skelang 2 Pcs Racing Jack Caster Wheel with 12mm Stem for 3 Ton Floor Jack

  • This jack caster is made of steel, durable and solid in construction.
  • The jack caster measures 2-3/8" in wheel diameter, 3-3/8" in mounting height.
  • stem size measures 12mm x 7/8" (Dia. x H).
  • Compatible with 3 ton rated floor jack with 12mm mounting holes (Please check the size before order).
  • Package includes jack casters, washers and nuts.
  • it's easy to screw the caster onto the floor jack.
  • It's great to replace old, worn or damaged casters on the floor jack, making the floor jack roll around with ease.
Check Stock

JEGS 80077-2 Replacement Saddle Pad For JEGS Professional Low-Profile 3-Ton Alum

  • For JEGS Professional Low-Profile 3-Ton Aluminum Floor Jack....
  • Sold Individually The JEGS 80077-2 saddle pad is a replacement for the JEGS Professional Low-Profile 3-Ton Aluminum Floor Jack 555-80077. To prevent slippage this pad is made from flexible rubber with a dimpled surface. Situated in the center of the saddle, this piece also provides a padded surface to protective bodywork and....
Check Stock

JEGS 80077-1 Replacement Rear Caster For JEGS 3-Ton Aluminum Jack (555-80077)

  • Fits JEGS Professional Low-Profile 3-Ton Aluminum Floor Jack (555-80077).
  • Sold Individually JEGS 80077-1 rear caster is just one of the replacement parts offered for our 555-80077 professional low-profile 3-ton aluminum floor jack. Easily installed, the castor will help keep your jack mobile and safe..
Check Stock

SPECSTAR Under Hoist Support Stand 3/4 Ton 1500Lbs Capacity Jack Stand Lifting from 1.3 to 2 Meters with 12 Inch Diameter Steel Base

  • Pro-Lift Floor Jack 2 Ton features 4,000 lbs maximum capacity and is constructed with heavy-duty steel for strength and durability. It gives you the ability to lift from 3-5/8 inches to 13-3/8 inches..
  • A hydraulic trolley floor jack is constructed with heavy-duty steel. It features the front wheels with the rear casters for maneuverability. The large swivel saddle provides you with easy jack positioning and user safety..
  • This low-profile jack for the car features an overload valve bypass system to prevent jack damage and user injury. F-757G car jack low profile features the compact design with the carrier handles to easily transport from one location to another..
  • The patented built-in by-pass device protects the hydraulic system from over-pumping damage. Before using the jack, insert provided handle into the handle sleeve, then pump 6 to 8 full strokes. This will help release any pressurized air which may be trapped within the reservoir.
  • This 2 Ton low-profile jack is ideal for auto repair services in your home garage. In addition, it is covered with a 1-Year warranty from the date of the purchase..
Check Stock

2 Ton Floor Jack Rubber pad Universal Floor Jack Puck Pads Floor Jack pad Adapter Pinch Weld Side Frame Rail ​Protector Puck for Floor Jack Stand

  • Floor Jack Rubber pad is Universal Floor Jack pad,Load Bearing: 2 Ton..
  • Floor Jack Rubber pad Fits most Jacks & vehicles,please verify dimensions Meet the conditions of use of your vehicle..
  • Floor Jack Rubber pad Design principle：.
  • 1. Use the rubber Jack pad as a buffer to avoid damage caused by direct contact between the jack and the chassis..
  • 2. The rubber Jack pad has a buffer function, the weight of the car and the gravity generated by the jack can be transferred to the rubber Jack pad, which will not cause damage to the vehicle chassis, and can protect the chassis from wear..
  • 3.Made from high quality rubber and slash cross slotted design which will provide more cushion crush resistance & non-slip..
  • Note: Since the rubber pad of the jack is made of rubber, there will be a slight smell of glue, please place it for ventilation before use..
Check Stock

BILT Hard Aluminum and Steel Floor Jack, Low Profile Hydraulic Racing Floor Jack with Dual Piston Rapid Pump, 1.5 Ton Capacity (3,000 lb) , Blue

  • Durable but Lightweight: BILT HARD hydraulic floor jack features industrial quality for professional mechanics and hardcore. It is constructed of a high strength aluminum billet and some steel components, weighs only 75% of the steel one at most. The sapphire anodized finish on the surface also makes it rust and corrosion resistant..
  • Low Profile: The aluminum racing floor jack has 1.5-ton/3,000 lb. lifting capacity with 3-1/8 in. to 14-1/4 in. lifting range, it provides you with a bottom height low enough to get underneath a lower vehicle while still providing enough maximum height to lift the vehicle off the ground..
  • Easy Operation: The 1.5 Ton floor jack comes pre-filled with oil, it is ready to use after simply assembling the 2 handles together and putting it into position. Please just remember to turn the long handle clock-wise until tight before raising, and VERY SLOWLY turn the handle gently counterclockwise to lower it..
  • Rapid Pump: The high performance low profile car jack has a exclusive dual parallel pump system that lifts most work loads in just 3-1/2 pumps! It also has a universal joint release mechanism for con....
Check Stock

OTC HDJ5 5 Ton Service Jack with Locking Handle and 6-3/8" to 22" Lifting Range

  • OTC's HDJ5 5-Ton Service Jack is an extremely safe and durable long chassis 5-ton floor jack that is the ideal size for lifting step vans, bucket trucks and smaller work vehicles.
  • Rugged, welded hydraulic pump and cylinder construction with rust resistant chrome plated ram.
  • built-in safety overload prevents using the jack beyond its rated capacity.
  • Handle lock and release controls are located on top of the 43 inch spring-loaded handle - handle can be locked into any position from vertical to horizontal.
  • Specifications: 6 to 22 inch lift range, 47 inch reach, 5-1/8 inch diameter, round saddle, 7.9 inch frame height, 43 inch, 3-position handle with lock and release controls, 4.4 inch fixed front (2), 2.8 inch mid-body swivel (2) casters.
  • Cycle tested design for a long life of professional duty and meets all 5 ASME PASE-2019 safety standards for service jacks.
Check Stock

BEETRO Upgraded Digital 5 Ton Electric Hydraulic Jack with Electric Wrench 12V Electric Jack for Car,SUV or Sedan 4 in 1 Electric Car Jack Hydraulic Kit for an Emergency Tire Change

  • [Mobile Car Repair Kit] 5 ton electric hydraulic jack, tire inflator and impact wrench all in one tool case, meet all your needs of changeing tires or....
  • [Powerful Car Jack] The jack can lift 5 ton car and takes less than 2 mins to lift to its MAX height(lifting height range:6.1-20.86 inch). Moreover,....
  • [Portable Tire Inflator] A 150 PSI tire pumping inflator is installed in the floor jack, equipped with digital pressure display. This 12V portable air....
  • [Electric Impact Wrench] This 12V DC electric car jack kit includes a 1/2 inch portable electric impact wrench with two sleeves with four sizes,....
  • [Multi-Purpose] Built-in LED light helps to find your lifting area and illuminate your working environment in the dark. Whether it is in your home....
Check Stock

BIG RED T82002-BR Torin Hydraulic Trolley Service/Floor Jack, 2 Ton (4,000 lb) Capacity, Red

  • Hydraulic trolley jack is constructed with heavy duty steel, providing long term durability.
  • Safety overload system to prevent use beyond rated capacity.
  • The jack stand has a large saddle surface area for better contact with the load being supported.
  • Floor jack has a 2 ton (4,000 lb) load capacity and features a minimum lifting height of 5.6" and a maximum height of 13".
  • The trolley jack equipped with (2) large steel casters and (2) 360-degree swivel casters for smooth maneuverability.
Check Stock