Best Toilet Water Valve

HTDAK 12 Inch (About 30cm) Toilet Fill Valve Silent Toilet Repair Water Saving Dual Flush Fittings Silent Split Toilet Valve Top Button Replacement Assembly

  • Toilet flush valve: for split toilets with top button, button hole diameter 3.8cm, drain hole diameter 6cm-7cm, measured tank height: 27cm-34cm, with tank cover height: 32cm-40cm.
  • Toilet filling valve: for toilets with bottom inlet, installation thread G15/16, adjustable range according to different tank heights: 27cm-34cm..
  • The double flush valve of the toilet can adjust the water level up and down to achieve full flush or half flush, and save water by adjusting the flush volume to reduce unnecessary expenses..
  • The toilet replacement valve kit is made of stainless steel, high-density carbon particle rubber, and high-quality silica gel: it has anti-corrosion, wear-resistant, rust-proof, leak-proof and other properties, and is suitable for operation under various water pressures and water quality..
  • The universal toilet replacement valve body is simple in structure, easy to replace, and only takes 10 minutes to install. It is easy to clean and maintain, so that your toilet components can continue to run smoothly..
Check Stock

Danco HYR271T Hydroright Dual Flush Valve and Lever Handle White

  • WATER-SAVING TOILET FLUSH VALVE: The HydroRight replacement toilet flush valve easily converts most standard toilets into a dual-flush water-saving....
  • REPAIRS COMMON LEAKY TOILET ISSUES: Eliminates the most common problems in toilets that cause leaks as this flush valve replaces a worn-out toilet....
  • LEVER STYLE HANDLE: Includes lever style split handle flush activator that gives you a choice to use the quick-flush setting which uses less water....
  • COMPATIBILITY: Fits 1.6 to 3.5+ GPF (gallons per flush) standard 2-piece toilets with 2 in. flush valve and requires 10-inch minimum clearance from....
  • EASY NO-TOOLS REQUIRED INSTALLATION: Simple Drop-in installation without tools in less than 20 minutes with NO TANK REMOVAL required..
Check Stock

Fluidmaster K-400H-039 High Performance Toilet Fill Valve with 2-Inch Adjustable Toilet Flapper Kit

  • The PerforMAX fill valve and 2 in. Flapper Kit is the premium solution to make your 2 in. flush valve toilet run like new.
  • PerforMAX toilet fill valve offers high performance with adjustable tank and bowl water for full water control.
  • PerforMAX Water-Saving Toilet Flapper included to save water use per flush.
  • Adjustable fill valve height to fit more tanks, corrosion resistant flapper, Solid frame for a secure seal, 7 year warranty.
Check Stock

YUHX Brass Bidet T Adapter with Shut-Off Valve,3 Way 7/8 or 15/16 and 1/2 or 3/8,Metal T Valve for Bidet Tee Connector Water Diverter Valve

  • ❶ ★ [ Easy to install ] Plastic thread neckline ensures that it will not cause cross-threading and leakage problems , Metal bidet adapter valve can be connected to the toilet filling valve manually without tools , cone washer helps make installation smooth and leak-proof.
  • ❷ ★ [ No-Leak metal t valve for toilet ] It has chrome plated surface , the leak proof design , high quality brass and ceramic valve , compression resistance , explosion proof, ensuring quality and longevity , no need to worry about fracture.
  • ❸ ★ [ Screen Washer Can Extend The Use Time of Bidet ] Includes screen filter washer to bidet line , Bidet shut off valve adapter with 1/2 filter screen sealing washer Can capture sand , dust , rust or other sediment particles entering the bidet , effectively prevents water damage.
  • ❹ ★ [ Brass t-valve bidet connection Size ] 7/8 female thread to the toilet filling valve , 7/8 male thread to the water supply ( 7/8 cock thread compatible 15/16 – 14UNS ) , 1/2 thread or 3/8 Compression thread to the bidet hose.
  • ❺ ★ [ 7/8 bidet adapter t valve ] Used to shut off water flow when not in use and adjust water pressure to suit your needs, there is no need to worry about affecting the water flow of the toilet after installing the bidet ....
Check Stock

Danco HYR451T HyrdroRight Universal Water-Saving Toilet Repair Kit with Dual Flush Valve, Lever Handle, White

  • WATER-SAVING DUAL FLUSH TOILET REPAIR KIT: Easily converts a standard toilet into a dual flush toilet that saves water by reducing the amount of water used with each flush. The permafit silicone seal is also chlorine and chemical resistant and will not warp..
  • ELIMINATES TOILET LEAKS: Eliminates common leaky toilet problems due to a worn-out flapper, handle or faulty flapper chain..
  • DUAL-FLUSH LIGHT-TOUCH LEVER UNIQUE SPLIT HANDLE DESIGN: The short center lever is the Quick Flush setting that uses significantly lower water volumes for liquids and paper – this setting is needed 4 out of 5 times. The second complete push lever at end is the Full Flush that uses the normal amount of water for solids..
  • COMPATIBILITY: The Dual Flush Converter works with standard 2 in. flush valves and requires a 10-inch minimum clearance from highest point of the flush valve opening to the inside of the tank lid. NOT COMPATIBLE WITH MANSFIELD TOILETS. The HYR451T combines two products that together will increase your toilet's efficiency: HYR271 Dual Flush Converter and HC630 HydroClean fill valve..
  • HASSLE-FREE INSTALLATION: Drop-in installation without tools in 5 to 10 minutes - tank removal not required..
  • IMPORTANT INSTALLATION TIP: Do not remove overflow tube and flush....
Check Stock

Danco HYR460 Hydroright HyrdroRight Universal Water-Saving Toilet Repair Kit with Dual Flush Valve, Push Btton Handle, White

  • WATER-SAVING DUAL FLUSH TOILET REPAIR KIT: Easily converts a standard toilet into a dual flush toilet that saves water by reducing the amount of water used with each flush. The permafit silicone seal is also chlorine and chemical resistant and will not warp.
  • ELIMINATES TOILET LEAKS: Eliminates common leaky toilet problems due to a worn-out flapper, handle or faulty flapper chain.
  • DUAL-FLUSH LIGHT-TOUCH BUTTON UNIQUE SPLIT HANDLE DESIGN: The short center button is the Quick Flush setting that uses significantly lower water volumes for liquids and paper – this setting is needed 4 out of 5 times. The second complete push button at end is the Full Flush that uses the normal amount of water for solids.
  • COMPATIBILITY: The Dual Flush Converter works with standard 2 in. flush valves and requires a 10-inch minimum clearance from highest point of the flush valve opening to the inside of the tank lid. NOT COMPATIBLE WITH MANSFIELD TOILETS. The HYR451T combines two products that together will increase your toilet’s efficiency: HYR271 Dual Flush Converter and HC630 HydroClean fill valve.
  • HASSLE-FREE INSTALLATION: Drop-in installation without tools in 5 to 10 minutes – tank removal not required.
  • IMPORTANT INSTALLATION TIP: Do not remove overflow tube and flu....
Check Stock

Danco HC660 Toilet Fill Valve Repair Kit Pack of 1 Blue White

  • WATER-SAVING toilet fill valve with built-in mini-valve that adjusts tank refill water level.
  • DETECTS LEAKS: The water-saving toilet fill valve sounds an audible alert when a leak is detected making you aware of any potential issues that must....
  • CLEANING JETS: Strong jets stir up debris in toilet tank in order rush any dirt down the drain with every flush keeping your toilet tank cleaner.
  • EASY ADJUSTMENTS: Shuts off water inside tank making repairs a snap, refills quickly, and has an adjustable height of 11 inches to 13.8 inches.
  • EASY INSTALLATION: Smart Nut helps with easy installation without tools in most standard toiletes.
Check Stock

385311641 Water Valve Kit, Plastic RV Camper Toilet Valve Parts for Pedal Flush Valve Toilets Compatible with Sealand 300 310 311 320 and 321 Series RV Marine Toilet Flush Valve Replacement (1 Piece)

  • Quality material: this 385311641 water valve kit made of quality ABS plastic material, sturdy construction to prolong the serve life and performance of this rv toilet parts.
  • Nicely fix and fit your toilet's hardware.
  • Applied for: the rv toilet valve parts and flush ball gaskets are compatible with Sealand 300/ 310/ 320 RV, Camper, trailer toilets, very practical.
  • Easy to use: you just need to snap the rv flush valve in, secure with 2 screws, and reconnect water lines.
  • Make it easier on yourself if you don't have ample room behind your toilet and use a mirror (or your phone in selfie mode) so that you can see the back of the assembly.
  • Nice combination: you will get 1 x toilet valve, 1 x rv toilet ball seal replacement, 1 x hose clamp, 2 x stainless mesh filters and 2 x screws.
  • Warming tips: check part numbers to ensure proper fit.
  • During the installing the rv water valve, please insure to install button with the correct angle in case that being broken.
Check Stock

American Standard SELECTRONIC 6063051.002, Chrome

  • ✅ HIGH QUALITY: The toilet urinal flush valve is made of brass material, structural , plated finishing, stable performance, Durable and Solid Structure..
  • ✅ AUTOMATIC TOUCHLESS FLUSH: No need to touch any part of the flusher after urinating. The entire flushing process is mechanically controlled by the sensor, which is suitable and sanitary. The flushing is thorough, no irregular smell is left, avoiding infection of the effectively..
  • ✅ INTELLIGENT WATER-SAVING: The Urinal Valve sensor can control flushing according to the frequency of use, efficiently avoiding the waste of water resources..
  • ✅ LOW CONSUMPTION: The toilet flush valve need low energy consumption, which is powered by 4 AAA batteries, and no need for external power supply..
  • ✅ WIDELY USED: The toilet urinal flush valve exposed wall mounted, provides maximum water conservation and financial savings..
Check Stock