Best Timing Sprocket Puller

DURATECH 3-Piece 3-Jaw Gear Puller, 3\

  • Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
  • Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
  • Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 4 or 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
  • Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas. Achieve more with its adjustable and reversible jaws..
  • Use the DURATECH 3, 4, 6-Inch Gear Puller 3 Jaw Flywheel Puller Set to remove most shift-fitted parts with ease. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free....
Check Stock

MUKCHAP 4 PCS Fan Clutch Wrench, 32mm Automotive Cooling Fan Clutch Nut Wrench & Water Pump Holder Removal Tool Kit for BMW Ford and More

  • The water pump sprocket retainer holding tool is used for holding timing chain in place so water pump can be removed for service. Prevent engine vibration and whining and to keep the timing chain in place to avoid camshaft readjustments.
  • The water pump sprocket retainer holding tool is compatible with GM, Vauxhall, and OPEL 2.2L 2.4L Ecotec motors, also fit for Chevrolet fit for Oldsmobile fit for Pontiac and Saturn vehicles.
  • Easy to Use: Simply remove the access plate, line up holes on the water pump tool to your sprocket.
  • Use included bolts and cover bolts to install the tool.
  • Made of higher carbon steel, high hardness, not easy to break, The exterior is coated with black antioxidant layer, extended service life. Water pump sprocket tool has a 3.9-inch (9.9cm) diameter and a 1.3-inch (3.3cm) depth.
  • The water pump pulley holder tool includes 1 pc water pump holding tool, 3pcs 5.5mm water pump bolts with 1.4-inch (3.5cm) length.
Check Stock

Orion Motor Tech 3\ 4\ 6\ 3-Jaw Gear Puller Set for Removal of Bearings Pulleys Flywheels (GD)

  • Universal Removal Tool: This 3-jaw removal tool set works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more, removing even rusted parts easily and—thanks to its even distribution of force—without damage..
  • Better Together: This professional or home tool kit includes three puller sizes to cover most applications: a 3 inch gear puller with a 2.3" reach and 3" max. spread.
  • a 4 inch gear puller with a 3" reach and 4" max. spread.
  • and a 6 inch gear puller with a 4.7" reach and 6" max. spread..
  • Versatile Reversible Design: Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside as needed..
  • 45# Carbon Steel: All parts are made with premium heat-treated 45# carbon steel for maximum strength. The jaws are galvanized and the central screw coated with black oxide to provide superior corrosion resistance and long service life..
  • Satisfaction Guaranteed: Along with this gear and bearing removal tool kit's durable material and careful engineering, you can rest easy knowing that these gear pullers are backed by Orion Motor Tech's warranty and friendly customer service..
Check Stock

Orion Motor Tech 3\ 4\ 6\ 8\ 3-Jaw Gear Puller Set for Removal of Bearings Pulleys Flywheels

  • Universal Removal Tool: This 3-jaw removal tool set works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more, removing even rusted parts easily and—thanks to its even distribution of force—without damage..
  • Better Together: This professional or home tool kit includes four puller sizes to cover most applications: a 3 inch gear puller with a 4.3" max. reach and 3" max. spread.
  • a 4 inch gear puller with a 5" max. reach and 4" max. spread.
  • a 6 inch gear puller with a 7.3" max. reach and 6" max. spread.
  • and an 8 inch gear puller with a 9.3" max. reach and 8" max. spread..
  • Versatile Design: Each of the three smaller 3-jaw gear and bearing pullers can be reversed to pull parts from the inside or outside.
  • the 8 in. puller can be used in 4 different positions to deal with both medium and large parts..
  • 45# Carbon Steel: All parts are made with premium heat-treated 45# carbon steel for maximum strength. The jaws are galvanized and the central screw coated with black oxide to provide superior corrosion resistance and long service life..
  • Satisfaction Guaranteed: Along with this gear and bearing removal tool kit's durable material and careful engineering, you can rest easy knowing that th....
Check Stock

DURATECH 8-Inch 3-Jaw Gear Puller, Removal Tool for Gears, Pulleys, Bearings and Flywheels, Fully Assembled, CR-V Steel

  • Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
  • Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
  • Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
  • Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas..
  • Jaw Spread: 8in, Jaw Reach: 9-1/16in, Puller: 12T. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free replacement insures your DURATECH Wrenches purchase against manufacturer defects..
Check Stock

DURATECH 6-Inch 3-Jaw Gear Puller, Removal Tool for Gears, Pulleys, Bearings and Flywheels, Fully Assembled, CR-V Steel

  • Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
  • Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
  • Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
  • Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas..
  • Jaw Spread: 6in, Jaw Reach: 2-9/16in, Puller: 5.7T. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free replacement insures your DURATECH Wrenches purchase against manufacturer defects..
Check Stock

DURATECH 4-Piece 3-Jaw Gear Puller, 3', 4', 6', 8', Removal Tool for Gears, Pulleys, Bearings and Flywheels, Fully Assembled, CRV

  • Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
  • Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
  • Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 4 or 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
  • Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas. Achieve more with its adjustable and reversible jaws..
  • Use the DURATECH 3, 4, 6, and 8-Inch Gear Puller 3 Jaw Flywheel Puller Set to remove most shift-fitted parts with ease. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaf....
Check Stock

Dorman 917-254 Engine Variable Valve Timing (VVT) Sprocket Compatible with Select Models

  • Direct replacement - this VVT sprocket fits and performs like the original sprocket.
  • Durable construction - made from durable steel and precision machined for reliable performance.
  • 100% new - this variable valve timing sprocket is entirely new, not a remanufactured part.
  • Quality assured - vehicle-specific application has been validation tested to ensure quality.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Dorman 917-251 Engine Variable Valve Timing (VVT) Sprocket Compatible with Select Honda Models

  • Direct replacement - this VVT sprocket fits and performs like the original sprocket.
  • Durable construction - made from durable steel and precision machined for reliable performance.
  • 100% new - this variable valve timing sprocket is entirely new, not a remanufactured part.
  • Quality assured - vehicle-specific application has been validation tested to ensure quality.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock