Best Tile Cutting Blade Kit

GoYonder Super Thin 4.5\ Grinder Blades Tile Blade, Diamond Saw Blade for Cutting Porcelain Tiles Granite, 115mm Tile Cutting Blade for Angle Grinder

...zes to choose, the size is: 115 x 10 x 1.2 x 22.23mm, Thickness: 1.2mm, Outer Diameter:115mm /4.5 inch, 7/8” arbor, Diamond concrete saw blade has a tough body with 1.22mm thickness..
【Grinder Blades Wet & Dry】: This tile blade 4.5 features a 10mm diamond rim, Super thin porcelain saw blade with free chips for cutting, Matched with hand-held machine with a 7/8" or 5/8" Arbor, It can be used on different types of angle grinders and tile cutters, Ideal for Wet and Dry cutting. Furthermore, it is easy to install and ready to use..
【Turbo Rim Design 】: The wet tile cutting blade has turbo rim edge help to increase the work efficiency, strong body and excellent material formula, high quality diamonds can efficient cutting and provide longer service life. They have the right thickness, thin enough to minimize loss of material but thick enough not to drift during cuts..
【High Performance】: Diamond saw blades comes with X teeth offer fast and smooth cutting. High-Performance diamond matrix provides long life and enhanced material removal. this blade cuts through porcelain like butter. 1.2mm thickness can keep staying original diameter makes it easier to make straight cuts and deeper cuts..
【Widely Applications】: Our Grinder blade can be availab....

Check Stock

EZARC 4-1/2 inch Diamond Blade, Super Thin Diamond Saw Blades for Angle Grinder, 4.5\ Tile Blade for Cutting Porcelain Ceramic Granite Marble Tile (2-Pack)

...eight guarantees a long lifetime even in the most demanding materials..
★【Superior Performance】Diamond saw blades with super thin X teeth turbo mesh rim not only offer the cleanest and smoothest cuts in different abrasive materials, but also reduce chipping and side friction. Our grinder diamond blade has good cutting quality without broken edges, even on super hard fine slate and marble..
★【Fit Size】Our 4.5" diamond blade is suitable for most tile saws and hand-held angle grinders with a 7/8" Arbor (Includes a adaptor for 20mm arbor). Size:4-1/2 Inch.
★【Professional Design】This diamond tile blade with integrated flange design provides the best cutting quality straight, vibration-free cutting and enhances stability and safety. Silencer Holes help to low down the noise and avoid heat damage during the cutting process..
★【Wide Applications】EZARC tile cutter blade is designed for extremely smooth and clean cutting porcelain, granite, ceramic tile, sandstone quartz, marble, brick, slate, cement backer board. It will be a perfect partner for tile installers and general homemade DIYers. Universal for dry or wet cutting..

Check Stock

Super Thin 7" Diamond Ceramic Saw Blade Porcelain Cutting Blade for Cutting Ceramic Or Porcelain Tile

...izes to choose, the size is: 180 x 10 x 1.4 x 22.23mm, Thickness: 1.4mm, Outer Diameter:105mm /7 inch, 7/8” arbor, Diamond concrete saw blade has a tough body with 1.4mm thickness..
【Tile Saw Blade Wet & Dry】: This 7inch tile blade features a 10mm diamond rim, Super thin porcelain saw blade with free chips for cutting, Matched with hand-held machine with a 7/8" or 5/8" Arbor, It can be used on different types of angle grinders and tile cutters, Ideal for Wet and Dry cutting. Furthermore, it is easy to install and ready to use..
【Turbo Rim Design 】: The wet saw blade has turbo rim edge help to increase the work efficiency, strong body and excellent material formula, high quality diamonds can efficient cutting and provide longer service life. They have the right thickness, thin enough to minimize loss of material but thick enough not to drift during cuts..
【High Performance】: Diamond saw blades comes with X teeth offer fast and smooth cutting. High-Performance diamond matrix provides long life and enhanced material removal. this blade cuts through porcelain like butter. 1.4mm thickness can keep staying original diameter makes it easier to make straight cuts and deeper cuts..
【Widely Applications】: Our Grinder blade can be available used a....

Check Stock

GoYonder 7 Tile Saw Blade Wet for Angle Grinder, Super Thin Diamond Saw Blade Grinder Blades for Wet Dry Cutting, Diamond Blade for Cutting Ceramic, Porcelain, Tiles, Granite, Marbles (Blue, 7\)

【Excellent Tile Blade】: The 7” tile saw blade is made of extended performance diamond matrix, which is fairly durable long lasting. Size:180 x 10 x 1.2 x 22.23mm, Thickness: 1.4mm, Outer Diameter: 180mm (7 inch), with 7/8" or 5/8" Arbor, Max speed 13200 RPM. 80m/s. Its great at cutting tile and stone without chipping the finished surface..
【Precise and Clean Cuts】: Our 7” diamond saw blade has a strong core it’s slightly thicker than other blades to have a fine cut and almost no chip-out. Moreover, This little tile cutting blade has 1.4mm thickness runs smooth fast and quiet actually. they have the right thickness, thin enough to minimize loss of material but thick enough not to drift during cuts..
【Widely Application】: This diamond blade can be used to cut porcelain tile, Granite, Marble, sandstone quartz, brick, slate, cement backer board and other thin masonry blade with. Went through many materials easily like it was butter. It will be a perfect partner for tile installers and general homemade DIY..
【X Teeth Rim Design】: The tile saw blade wet has X Teeth rim edge help to increase the work efficiency, strong body and excellent material formula, high quality diamonds can efficient cutting and provide longer service life. Warm P....

Check Stock

OKVEQUIP 3PCS 4Inch Super Thin Diamond Saw Blade Dry or Wet Tile Ceramic Disc Wheel Porcelain Cutting Discs for Marble Quartz Granite

【Tile Blade Widely Use】: Ceramic tile blade cutting discs can cut porcelain, vitrified tiles, ceramic tiles and thinner granite, marble, etc. quickly and accurately..
【Features】: Diamond tile blade fast cutting, small kerf, low power consumption, sharp and wear-resistant,using hot pressing sintering process, can be used for a long time.
【Applicable type】：Concrete cutting machine saw blade can be used for dry/wet cutting.
【Adapted machine】: Cutting marble granite porcelain tile can be used with marble machine, desktop cutting machine, angle grinder.
【Ceramic cutting disc wheel parameters】: size 105x20x10MM, outer diameter 105MM, inner diameter 20MM, with washer to change 16MM, thickness 1.2MM, RPM2000-8000.

Check Stock

QEP 6-4001Q Diamond Blade for Wet Tile Saws for Ceramic Tile, 4 in.

Exact specifications assuring the user a wobble-free blade that produces smooth and precise cuts.
Diamond blade for long-lasting performance and minimal chipping.
Note: When cutting tile it is important to allow the blade to do with cutting and not to push the tile into the blade as this will cause chipping and the blade to bind up and stop..

Check Stock

4.5Inch Super Thin Diamond Tile Blade for Cutting Porcelain Tiles Marbles…

Super thin turbo mesh rim diamond blade provide fast, precise, smooth and chip-free cutting experience for you..
Thicker center to avoid vibrations and wobbling. High Performance diamond matrix provides long life and enhanced material removal..
Diamond blade can be used as porcelain tile blade, ceramia tile blade, granite blade and other thin masonry blade..

Check Stock

7 Inch Super Thin Diamond Tile Blade Porcelain Cutting Blade, Dry or Wet Cutting Ceramic Granite Marble

【SPECIFICATIONS 】: Diameter: 7 Inch(180mm).
Thickness: 0.06 Inch(1.6mm), Up to 8,600 maximum RPM. This diamond blade fits for most tile saws and handheld angle grinders..
【Super thin turbo mesh design 】 : Super thin turbo mesh rim diamond blade can provide you with a fast, precise, smooth and chip-free cutting experience. Thicker center to avoid vibrations and wobbling..
【Work efficiently】: The tile blade is suitable for wet and dry cutting, and wet cutting effect is better, can extend the service life of saw blades, X mesh turbo wave is conducive to cooling and provides high-efficiency cutting efficiency..
【Material】: The diamond cutting wheel is made of high quality diamond, impact-resistant and high-temperature resistant..
【Widely Application】: Our grinder blade are specially designed for cutting porcelain, brick, ceramic tile, granite, sandstone quartz, marble, , slate, cement backer board..

Check Stock

7 Inch Super Thin Diamond Tile Blade Porcelain Cutting Blade Set of 2 Pieces, Dry or Wet Cutting Ceramic Granite Marble

Super thin turbo mesh design: Super thin turbo mesh rim diamond blade can provide you with a fast, precise, smooth and chip-free cutting experience..
Efficient: The tile blade is suitable for wet and dry cutting, and wet cutting effect is better, can extend the service life of saw blades, X mesh turbo wave is conducive to cooling and provides high-efficiency cutting efficiency..
Application: Our diamond blade are specially designed for cutting porcelain, brick, ceramic tile, granite..
Material: The diamond cutting wheel is made of high quality diamond, impact-resistant and high-temperature resistant..
Thickness: 0.06 Inch(1.6mm), Up to 8,600 maximum RPM. This diamond blade fits for most tile saws and handheld angle grinders..

Check Stock