Best Three way Butterfly Valve

DERNORD 1.5 Inch Tri Clamp Clover Butterfly Valve with Trigger Handle Sanitary Fitting Stainless Steel 304 2 Pack 1.5 Inch Trigger Butterfly Valve

  • Tube OD: 1-1/2 Inch, Ferrule Size: 50.5MM, Fits 1.5 Inch Tri-clamp.
  • The Trigger style handle butterfly valve - 13 Positions.
  • Temperature Rating (spec): 15°F thru 200°F.
  • Tri-Clamp butterfly valve Max Pressure 1.6MPA, 100 Percent pressure hydraulic tested for reliability.
  • The Trigger style handle allows you to set the valve in four different positions simply by pulling and turning.
Check Stock

FINIS Original Swimmer's Snorkel , Pink, Adult

  • FIRST CENTER-MOUNT SNORKEL: Created and patented by FINIS.
  • designed specifically for training swimmers.
  • COMPATIBLE WITH MANY STROKES: Stays in place for freestyle, butterfly, and breaststroke (including flipturns).
  • COMFORTABLE MOUTHPIECE: Made with a soft and flexible medical-grade silicone.
  • ADJUSTABLE HEAD BRACKET: Makes for quick strap adjustments and universal fit, even with swim cap and goggles.
  • ONE-WAY PURGE VALVE: Allows water to flow out of the tube without entering the mouthpiece.
Check Stock

zilue Butterfly Banner Decorative Paper Garland for Wedding, Baby Shower, Birthday & Theme Decor 110 Inches Long Set of 2 Pieces Yellow

  • PERFECT DECORATIONS: These butterfly garland are a great way to decorate, and impress at any event, It could be butterfly birthday party, baby showers, kids birthdays , weddings, bridal showers, office party or any other themed parties you can imagine.They are perfect for decoration..
  • EASY TO OPERATE: Just takeout the folded butterflies and expand them in the order they are folded. Hanging in any position is a perfect decoration. If one is too long, you can cut them into strips and use them to hang from ceiling or wall..
  • THREE DIMENSIONAL DESIGN: Two-tone layout adds visual interest and it will be really attractive when it spinned or swayed.
  • SIZE & COLOR: Yellow butterfly garland includes 2 pieces. The length of each strand is about 9.2ft, the size of a single butterfly is 4.7*3.1 inches (L x W).18 butterflies on each line. Enough length and rich colors for you to match different occasions.
  • PREMIUM PRODUCTS: Made of high quality paper, each butterfly was stitched by machine into a single strand.
Check Stock

Hydraulic Adjustable Variable Flow Control Valve, 0-30 GPM, 3/4” NPT Port Size

  • SPECIFICATIONS: Chief’s front end loader control valve has 1 spool, 3 position spring-center with 4th position float detent, a 25 GPM flow rate, and 3000 PSI maximum working pressure. It has 1/2" NPT work, 3/4" NPT inlet/outlet port, and weighs 16 lb..
  • VERSATILE: The RLD Series 1 spool 4 way directional control valves can be used to forward, retract, or hold the position in double-acting hydraulic cylinders. Their versatility means these hydraulic valves can be used in most hydraulic circuits..
  • ROBUST: Our hydraulic control valve 1 spool has a precision machined construction and is extremely sturdy. Dynamic and high performing, the control valve operates easily at pressures as high as 3000 PSI and can be actuated in multiple ways..
  • ENERGY EFFICIENT: Equipped with a float detent, this hydraulic valve 1 spool, allows the hydraulic fluid to pass over the center of the valve to the other port. These valves are energy and effort efficient..
  • HIGH UTILITY: This loader valve control can effortlessly shift into three positions per requirement. Our hydraulic directional control valves offer enhanced directional control of actuators, even in cramped spaces, and prevent excess heat build-up..
Check Stock

SPELAB Electric Exhaust Cutout Valve 3.0 Inch 76mm Catback Single Y Pipe with One Controller Remote Kit…

  • .... The faster the exhaust could be pushed out of the engine, the faster the combustion process could start over which give more horsepower. Aggressive deep sound while ensures smooth exhaust gas flow. SPELAB Butt Joint Exhaust Band Clamp is recommended for installation..
  • Cutout Valve: High-quality chrome-plated steel butterfly plate and valve pipe wall thickening process. You can turn on and off from the inside of the car by remote control. Turn off the switch, keep your original, peaceful exhaust system for comfortable. Turn on the switch, you can get aggressive deep sound. The opening angle of the cutout valve can be freely controlled..
  • Working Environment: Working Voltage: 12V. Electric Exhaust Cutout Working Temperature: 0℃-150℃. If below -5℃, the oil in the motor will be frozen and causing the butterfly valve to be stuck. Electric Exhaust Cutout is not recommended to start work in heavy rain or extremely cold weather, the valve motor is NOT WATERPROOF..
  • SPELAB warrants the Electric Exhaust Cutout Valve Kit for 12 months warranty for quick-wear part. Include (motor, remote control, control box). We value your shopping experience and strive to offer a high-quality product and service. And if you have any other problem, contacting us and we will ....
Check Stock

Brine Shrimp Hatchery Kits brine Shrimp Eggs Incubator Hatchery brine Shrimp Eggs Incubator Artemia Hatchery with Silver air Pump

  • The brine shrimp incubator contains：1pcs brine shrimp eggs incubator Hatchery，1pcs silver air pump with 1pcs black controller valve,1pcs check valve, 1pcs air stone,1 meter transparent aquarium tubing, 1 meter black airline ,one unit brine shrimp net colllector,two units automatic brine shrimp feeder for fish,three units Brine shrimp suction tube and six units Brine shrimp storage bottle.
  • Our brine shrimp incubator is designed professional for hatching brine shrimp eggs which include silver air pump air stone and aquarium tubing..
  • There are two ways to install our brine shrimp hatcher machine.You can use the four suction cup of shrimp incubator to stick it to the tank glass inside or you wanna install it out of the tank glass then you can use the tripod to install out of the tank..
  • The first way to provide oxygen to the brine shrimp incubator is to put the bubble stone in the incubator to provide oxygen. When the brine shrimp has hatched, open the trim valve at the bottom of the incubator to collect brine shrimp. Note that the direction of the inlet and outlet of the check valve must be installed correctly with the pipe, otherwise the air pump will not be able to discharge air..
  • The second way to provide oxygen to the brine shrimp from the bottom hol....
Check Stock

3 Outlet 3-Function Solid Brass Shower Diverter Concealed Thermostatic Mixer Valve with Trim for Bathroom Shower System, Can Simultaneous Operation, Flows Can Be Controlled(Matte Black, Round)

  • 【Thermostatic Shower Valve】:The shower mixing valve supplies water at a constant required temperature, which can accurately control the temperature, prevent you and your family from being scalded, and ensure safety..
  • 【Multi-Function】:3 way shower diverter valve by 3 knobs can work simultaneously or individually, suitable for most three-function shower kits..
  • 【Strong Practicality】:Generous Flow Rate, with 3/4″ hot and cold water inlet and three 1/2″ outlets. Let you fully enjoy the experience of a comfortable shower..
  • 【High Quality and Durability】:High temperature resistance and preservative, made of high-quality solid brass material, matt black surface treatment to ensure a perfect appearance and service life. Including shower valve and trims..
  • 【6-Year Warranty】:Change a thermostatic cartridge and accessories for free within 3 years since you buy, and the main body guaranteed 6 years since you buy. If you have any questions about the shower diverter valve, please feel free to contact us, we will provide you with a satisfactory solution..
Check Stock

NestBasics Brine Shrimp Hatchery Kits brine Shrimp Eggs Incubator Hatchery brine Shrimp Eggs Incubator Artemia Hatchery kit Machine

  • ...s product contains：one unit brine shrimp eggs incubator，one unit black USB plug air pump with one unit black controller valve,one unit check valve, one unit air stone,1 meter transparent aquarium tubing, 1 meter black airline ,one unit brine shrimp net colllector,two units automatic brine shrimp feeder for fish,three units Brine shrimp suction tube and six units Brine shrimp storage bottle.
  • Our brine shrimp incubator is designed professional for hatching brine shrimp eggs which comes with the whole set including air pump air stone and aquarium tubing. The main purpose of the small The USB air pump is for continue to hatching brine shrimp when the electricity is off and after the home is powered off, the The USB air pump can be connected to the power bank to continue hatching brine shrimp..
  • There are two ways to install our brine shrimp hatcher machine.You can use the four suction cup of shrimp incubator to stick it to the tank glass inside or you wanna install it out of the tank glass then you can use the tripod to install out of the tank..
  • The first way to provide oxygen to the brine shrimp incubator is to put the bubble stone in the incubator to provide oxygen. When the brine shrimp has hatched, open the trim valve at the bottom of the incubator t....
Check Stock

The Catalyst Fermentation System - 6.5 Gallon Plastic Conical Fermenter

  • 6.5 Gallon Conical Fermenter that separates sediment, eliminates transfers and allows you to bottle straight from your fermenter..
  • The Catalyst’s tank is made from Tritan, a food-safe, BPA-free polymer. This revolutionary material retains the same clarity and smoothness of glass, but is resistant to shattering..
  • 3” Trub Trap Butterfly Valve – the largest in the industry- is designed to work with any large-mouthed mason jar, which makes catching and storing viable yeasts or separating sediment super simple..
  • Includes: 6.5 Gallon Tank with Lid, Stand (Base, 2 Legs, 2 Support Beams, 8 Screws), 3” Proprietary Butterfly Valve, Bottling Attachment, Transfer Tubing, Tubing Clamp, Rubber Stopper, 16 Oz. Wide Mouth Mason Jar, Allen Wrench.
  • Total Height (does not include airlock): 26.25" Maximum Width: 17".
Check Stock