Best Three Phase Watt hour Meter

OhhGo Three-Phase Multifunctional Digital Energy Meter Voltage Current Display Programmable Electric Power Meter

  • [Smart Meter] - Three-phase voltage, current digital smart meter, with RS485 communication interface, various parameter detection, comprehensive monitoring..
  • [Detection Function] - Switch input/output, can detect current, voltage, electric energy, power, and power factor..
  • [Convenient Use] - Digital display and four buttons design, enables the instrument to achieve convenient and flexible use..
  • [ABS Flame Retardant Material] - ABS flame retardant shell, good insulation and durable in use. Also features stable performance and high accuracy..
  • [Suitable For]- It is suitable for complete monitoring and management of electrical parameters in various incoming circuits and large- capacity distribution and outgoing circuits..
Check Stock

Baomain DDS238-4 (30-100)Single Phase DIN-Rail Kilowatt Hour kwh Meter 220V 100A

  • Rate Voltage:220V 230V 240V Rate Current:30(100A).
  • 220V Single Phase DIN-rail Kilowatt Hour kwh Meter.
  • Insulation Performance:AC voltage 2KV for 1 minute,impulse voltage 6KV.
  • Accuracy Class:Class 1 Starting Current:0.4%lb.
  • 35mm standard DIN rail installation,complying with standard DIN EN5002.
Check Stock

Universal Electric kWh Meter – Omnimeter I v.3

  • Universal Smart Meter – Works on any electrical system up to 480V.
  • Submeter Any Electrical Load and Read the Results Over the Web.
  • 120 to 480 volts — 100 to 5,000 amps — 50 or 60Hz.
  • 1-phase or 3-phase — Accurate to 0.5% — Wide Selection of CTs.
  • The Best Communicating Smart Meter for the Lowest Price — CTs NOT Included in Price.
Check Stock

Leviton 800-5372-8K 30 Amp Flush Mount Dryer Receptacle

  • Certified to all applicable standards of ANSI C12.1.
  • Equipped with both Isolated Pulse Output and RS-485 Serial Port (Modbus Native) standard for easy interface with most AMR and BAS systems.
  • Utilizes revenue grade 0.3 accuracy class 0.1A secondary solid core current transformers (CTs) that conform to all applicable ANSI requirements or 1-Percent accuracy split-core CTs.
  • Up to three sets of CTs per phase can be paralleled per meter.
Check Stock

RC Watt Meter DC 60V/100A Digital LCD Balance Voltage Battery Power Analyzer Wattmeter Tester Checker Watt Volt Amp Meter

  • Measures 0 to 60 Volts. Works on 12, 24, 36, and 48 volt battery bank systems..
  • Precision Alu-Chrom current sensing resistor, with only 0.001 Ohms resistance and circuitry that draws only 7 mA..
  • This is the All-In-One Meter:a power meter, a volt meter, an amp-hour meter, ammeter and energy meter.Digital LCD screen gives clear crisp number readings..
  • Perfect troubleshooting tool:it's indispensable for analyzing, testing and troubleshooting any DIY DC power project..
  • Professional RC Watt Meter is an excellent addition to your RC hobby, DC circuits, Solar system, Boat/RV & Battery Backup systems!.
Check Stock

Proshopping 200A RC Watt Meter, High Precision Power Analyzer, DC 0-60V Volt Amp Watt Checker Tester, with Digital LCD Screen- for voltage(V) current(A) Power(W) Charge(Ah) and Energy(Wh) Measurement

  • 8 in 1 rc watt meter power analyzer - automatic detect and continuously display a real-time of Current (A), Voltage (V), Watts (W), Amp-hours (Ah), Watt-hours (Wh), Peak Amps (Ap), Minimum Volts (Vm), Peak Watts (Wp).
  • New alarm function, when the amp is over 200A, the current display will flash to alarm.
  • Universial battery watt monitor - wide working current input range 0-200A.
  • voltage input range DC 0V-60V, works on 12V 24V 36V 48V battery bank systems.
  • High precision watt monitor gauge - measures 0-200 Amps, resolution 0.01 Amps.
  • Sensitive digital LCD screen display - easy to read the parameter through the clear and bright blue backlight LCD screen.
  • low power consumption of 6 mA, more efficient than any other LED meter.
  • Wide application - a professional tools for your RC drone flight(plane) battery, DC circuits, solar system, boat, RV and battery backup systems.
  • perfect for analyzing, testing and troubleshooting any DIY DC power project.
Check Stock

Presonus StudioChannel Studio Channel Recording Vacuum Tube Mic Preamp Strip

  • Lifetime Customer Service by Presonus product Experts. Guaranteed legitimate and authentic merchandise. Class A vacuum tube microphone / instrument preamplifier. Tube gain and tube drive.
  • Variable VCA compressor (threshold, ratio, attack, release, make up gain, auto, soft). Three-band parametric EQ. Precision analog VU meter for gain reduction and output. EQ Pre/Post compressor switch.
  • 80Hz high pass filter. 20dB pad. Phase invert. Rugged metal chassis. High headroom. Ultra low noise design.
Check Stock

Surecom SW-102HF 1.5-70MHz V.S.W.R. & Power Meter

  • Certified to all applicable standards of ANSI C12.1.
  • Equipped with both Isolated Pulse Output and RS-485 Serial Port (Modbus Native) standard for easy interface with most AMR and BAS systems.
  • Utilizes revenue grade 0.3 accuracy class 0.1A secondary solid core current transformers (CTs) that conform to all applicable ANSI requirements or 1-Percent accuracy split-core CTs.
  • Up to three sets of CTs per phase can be paralleled per meter.
Check Stock

200A High Precision Power Analyzer Watt Meter Battery Consumption Performance Monitor with LCD Backlight for RC, Battery, Solar, Wind Power

  • ...fect of the multi-axis aircraft. Predict model airplane flight time,Choose the best propeller/most efficient motor..
  • 【HIGH PRECISION】Current: 0-200A, continuous current 50A, resolution 0.01A. Operates from 4.8-60V (When the test voltage is lower than 5v, a separate 12v power supply is required to power the power meter), resolution 0.01V. Measures 0-6554Wh, resolution 0.01Wh. The current can determine the battery capacity, the continuous current can determine the discharge time, and the maximum instantaneous current can determine the internal structure of the battery to protect circuit..
  • 【MULTI-FUNCTIONAL】Watt meter power analyzer can verify sufficient operating voltage under load and prevent peak currents damaging battery, motor control, motors, wiring and connectors.
  • Verify correct battery charger operation (connect your battery and charger).
  • Set the cut-off voltage and check the battery capacity.
  • Detect the receiver and the actual operating current to determine whether UBEC, etc..
  • 【BACKLIT LCD SCREEN】Watt meter comes with a 16 * 2 backlit LCD screen, so you can see more clearly. Don't worry about testing anywhere, even in direct sunlight, you can see power analyzer very clearly..
  • 【COOLING EXHAUST PORT】Plug-in auxiliary battery, Wat....
Check Stock