Best Threaded Shank Router Collet

Andis Blade Care Plus Jar

  • Professional Flush Trim Router Bit with Top Bearing: 1/4” Shank, 1” Cut Length. The two independent ball bearings with forced on steel collars at the tip of each bit ensures smooth worry free use..
  • INDUSTRIAL QUALITY UPCUT FLUSH TRIM ROUTER BIT: Made of solid VIRGIN carbide with NANO blue coated. And Nano Blue Coating with high hardness and heat resistance enables the tool’s cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality..
  • Up to 2.5X longer life compared to uncoated bits..
  • The 1/4-Inch flush trim Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp..
  • The spiral router bit suit for CNC router and any plunge routers with 1/4″ collet..
Check Stock

Wolfride 1/2-Inch Shank Router Bit Collet Extension, Adapter for 1/2-inch Shank Bits

  • High quality,made of heavy-duty steel, sturdy and durable for long life..
  • High concentricity and 1/2 inch shank diameter,don’t worry about wobble and bent..
  • Overall length of the router collet extension is 3-1/4 Inch..
  • Lever principle, the less the part of the shaft be clamped, the greater the force the shaft experienced, especially when the cutter head is big. So please ensure at least 3/4 of the shank must be inserted..
  • Greater for that router table that doesn't quite extent to where you want it to..
Check Stock

Rockler Router Bit Set Up Jigs for 45 Degree Lock Miter Bits – Jig Works for 3/4” Stock on One Side & 5/8” on Other – High-Quality HDPE Miter Router Bit - Lock Miter Router Bit Measure 2' x 3-7/8' x 3/4'

  • Set Up for 45° Miter Lock Router Bit: The Rockler router bit set up jig helps to set your miter lock bit to the precise height every time for accurate lock miter joints!.
  • Designed To Work With: This router jig works for 3/4" stock on one side and 5/8" stock on the other..
  • High-Quality Material: Our lock miter router bit jig is made of durable HDPE and this lock miter bit measures 2" x 3-7/8" x 3/4"..
  • Save Your Time: Quickly and easily save your time for creating a 45° lock miter joint jig. Precisely Machined Setup aid and no test cuts required. This woodworking jig helps to adjust a bit. Make life easier!!.
  • Keep Hands Clear Of Bit: Use these jig woodworking tools only in a table-mounted router at a lower speed. Do not bottom out a bit in your router collet. Allow at least a 1/8" gap between the bottom of the bit shank and bottom of router collet. Keep your hands clear of bit..
Check Stock

Thomegoods 2PCS 19691 1/4\ and 19693 1/2\ Router Collet fits for Dewalt 326286-04,326286-03, Hitachi 323-293,325-199, 323-421,Bosch 2610906283,2610906284

  • 1/4" Router Collet Replaces: Dewalt 326286-04 Big Horn 19691 Bosch 2610906283 Hitachi 323-293 RC025DW.
  • 1/2" Router Collet Replaces: Dewalt 326286-03,Big Horn 19693 Replace: Bosch 2610906284,Hitachi 325-199, 323-421.
  • 1/2" Router Collet fit Router Models: Bosch 1617, 1617EVS, 1618, 1618EVS, 1613, 1613EVS, 1613AEVS, 1619EVS, MRC23EVSK, MRF23EVS, MRP23EV.
  • Hitachi-KM12VC,M12SA2,M12V2,M12VC,M12SC ,KM12SC,M12VE Routers.
  • Features: | Material: Steel | Threads: M19x1.
  • Package include:1 x 1/4" Router Collet, 1 x 1/2" Router Collet.
Check Stock

SpeTool Tapered Ball Nose Spiral Router Bit 1.0mm Tip Diameter (0.5mm Radius) 4.82 Deg for CNC Milling Engraver Carving Bits

  • Solid carbide spiral ball nose tapered router bit.
  • 2 flute, 1/4" shank, 1-1/4" cutting length, 0.5mm tip diameter, 4.82Deg, TiAlN coating, 55HRC.
  • Mostly used for 2D/3D engraving work, detail carving.
  • The cnc router bit suit for wood like Plywood, OAK, MDF, and metail like alloy copper, have long service life for sharp.
  • This route bit suit for CNC router and and any brand plunge router with 1/4" collet.
Check Stock

SpeTool Carbide Ball Nose Router Bit 2.0mm Diamter Tip (1.0mm Radius) Woodwork Metal CNC Engrave Carving Machine Tools 1/4 Shank TiAlN Coat

  • Solid carbide spiral ball nose tapered router bit.
  • 2 flute, 1/4" shank, 1-1/4" cutting length, 2.0mm tip diameter, 3.92Deg, TiAlN coating, 55HRC.
  • Mostly used for 2D/3D engraving work, detail carving.
  • The cnc router bit suit for wood like Plywood, OAK, MDF, and metail like alloy copper, have long service life for sharp.
  • This route bit suit for CNC router and and any brand plunge router with 1/4" collet.
Check Stock

SpeTool Tungsten Carbide Tapered End Mill 1/4\ Shank 3\ OVL with 4.0mm Tips Diameter (2.0mm Radius) 2.2Deg for Woodworking Carving CNC Router Bits

  • Solid carbide spiral ball nose tapered router bit.
  • 2 flute, 1/4" shank, 1-1/4" cutting length, 4.0mm tip diameter, 2.2Deg, TiAIN coating, 55HRC.
  • Mostly used for 2D/3D engraving work, detail carving.
  • The cnc router bit suit for wood like Plywood, OAK, MDF, and metail like alloy copper, have long service life for sharp.
  • This route bit suit for CNC router and and any brand plunge router with 1/4" collet.
Check Stock

Genmitsu CNC Router Bits 1/8 inch Shank Straight Router Bits Nano Blue Coat 2-Flute End Mill Cutter for Wood MDF PVC Acrylic, 10 PCS, SR10A

  • High Quality: Nano Blue Coating for extended tool life and performance. Perfect for Roughing operations, slots and more..
  • Efficient Cuts: The 2-Flute Straight Router Bits have a mirror polish and large chip space which produces smooth cutting and fast chip-removal..
  • Shank diameter: 1/8''(3.175mm), cutting diameter: 1/8'' (2.175mm), cutting length: 17mm, overall length: 38mm, comes with 10pcs 1/8 shank 2-Flute Straight Router Bits..
  • Applicable Materials: Suitable for MDF, PVC, Acrylic, wood, solid wood, chipboard, plywood, organic board, core board, etc. Widely used for cutting/ engraving/ carving/ grooving/ slotting/ drilling/ hollowing/ positioning/ roughing / milling..
  • Wide Compatibility: Genmitsu SR10A 2-Flute Straight Router Bits are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device..
Check Stock

SpeTool 12501 2 Flutes Carbide CNC End Mill For Aluminum (1/4 Shank, 2.5 inch Long) Router Bit Spiral Mill

  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
  • The EndMill With Flat Top, 2-Flutes, Large Chip Pocket, Easy Chip Removal..
  • For Aluminum, Non-ferrous Metal, Plastics, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp.
  • The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Slot Machining, Side Face Machining, Hole Machining. Please Adjust the Speed, Feed and Cutting Depth According to Actual Cutting Conditions..
Check Stock