Best Threaded Rod Hanger

12 Pack 8/32 Inch M4 Threaded Rod with Hex Nuts 12 Pcs M4 Stainless Steel Threads Studs Rods 12 Pcs M4 Stainless Steel Fully Threaded Hex Nuts for Beaded Garden Stake Rods (12 Inch)

Ample Quantity: the package comes with 12 pieces of 8/32 inch M4 12 inch threaded rods and 12 pieces of M4 hex nuts, a total of 24 pieces, a nice set is ideal for making a dozen (fairy garden stakes)fairy garden stakes or the other projects.
Dimension: the threaded rod is about M4 in thread diameter, 300 mm/ 12 inch in total length.
The hex nut is about M4 in coarse thread diameter, 0.7 mm/ 0.03 inches in pitch, 0.28 inch/ 7 mm in width across flat, and 0.11 inch/ 2.8 mm in height.
Threaded Rods Studs: the 8/32 threaded rod is made of 304 stainless steel, safe, sturdy, with corrosion resistance and antirust ability, and can offer you a long time service.
It can be applied for assembly fastening, just screw it into threaded nuts or tapped holes.
Hex Nut: the hex nut is an ideal replacement for industrial and construction fasteners and an essential accessory in your daily life, simply screwing it onto a bolt, cap screw or threaded rod of the same thread size, quick and easy.
Widely Applicable: these fairy stake rods can be widely applied to bolts, clamps, hangers and U bolts and many....

Check Stock

LABOR SAVING DEVICES 81-000 Creep-Zit Fiberglass Wire Running Kit green

Pro 36ft kit, threaded connector wire running rod.
1 luminous Fiber Fuse 6ft push/pull rod with male & female threaded connector ends.
5 Fiber Fuse 6ft push/pull rods with male & female threaded connector ends.

Check Stock

Entatial Bike Derailleur Alignment Tool, Derailleur Hanger Alignment Gauge Strong Hardness for Bicycle Derailleur Hanger Proofreading

【Usage Indicator】: Hold the derailleur hanger alignment in one hand, keep the body steady, one hand open or push the main body (specifically according to the tail hook), adjust the data deviation of the measurement rod corresponding to the data deviation of the ABCD point is OK, the adjustment process may need more subtract. (Note: ABCD refers to 4 points of the end face of the rim).
【Deviation Measurement】: Rotate the lock handle, adjust the measuring rod, lock the sliding sleeve, adjust the distance between the measuring rod and the ring, determine the value of the measuring rod, measure the deviation between the tail hook and the ring.
【Strong Material】: The derailleur hanger alignment gauge main body is made of aluminum alloy with anodized surface, which reduces the weight while having strong hardness.
【360° Correction】: Rotate the spacing between the wheel group and the tail, 360° rotation measures the spacing between the wheel group and the tail. Lock the rod, accurate thread, closely fit, clockwise rotate the handle, screw the rod into the tail, accurate lock.

Check Stock

OEMTOOLS 25553 MacPherson Strut Spring Compressor Heat-Treated Thread Rod Strut Compressors Coil Spring Compressor w/ Forged Hooks 9 Threaded Length Black

EASY-TO-USE SPRING COMPRESSOR: Easily remove and replace MacPherson strut springs with the broad contact hooks on our coil spring compressor tool.
Our 3/4” (19mm) hex head on the threaded rod is designed to be hand-torqued with a ratchet or wrench.
SAFE STRUT SPRING COMPRESSION: Strut compression is dangerous work.
Our strut compressor features detent pins that keeps the strut spring in place during compression.
Add anti-seizing compound to the threaded rod before using MacPherson Strut Compressor.
STRUT MAINTENANCE TOOL: Remove MacPherson strut springs quickly and easily so that you can make repairs to the strut assembly.
Access bent struts, strut tubes, and strut cartridges safely thanks to the power of our near universal strut compressor.
WON’T BEND DURING USE: Don’t rely on cheaper material to get a dangerous job done.
Our durable heat-treated threaded rods on our strut coil spring compressor ensures a smooth compression of strut springs without bending the threaded rod.
WORKS ON MOST VEHICLES: Features a threaded length of 9”, making it compatible with most vehicle’s MacPherson strut springs.
Attach the threaded rods so that the hooks are set 180° apart.
Evenly compress both sides of the strut spring compression tool.

Check Stock

Holdrite QuickStand 24 Inch x 24 Inch x 4 Inch Ceiling Mounted Water Heater Platform with Drain Pan, Hanging, 30-SWHP-M

WATER HEATER PLATFORM: QuickStand ceiling-mounted water heater platforms are ideal for supporting water heaters, water source heat pumps, fan coil units, and remote chillers.
watertight and pre-assembled with a built-in drain pan and drain fitting.
COMPATIBILITY: This water tank stand adapts to 3/8 inch or 1/2 inch threaded hanger rod.
SPACE SAVING: Water heater support frees up usable floor space in tight quarters.
DURABLE: Tankless water heater stand is composed of strong and sturdy galvanized metal.
SPECS: Water header accessory stand can hold up to 20 gallons.

Check Stock

Highcraft PLTG38-20 Ceiling Flange Hanger Plate for 3/8 in. Threaded Rod (Not Pipe), for DYI Plumbing and Industrial Decor, 1-3/8 W x 3-5/16 L, Galvanized Iron (Pack of 20), Chrome

✔SECURITY: Provides Solid Structural Support for Threaded Rods in Your Plumbing Applications.
✔#1 HOME ESSENTIAL: Keep These Wall Mounting Brackets At Hand At All Times And Let The Magic Begin! These Angle Brackets Will Do A Great Job Mounting and Supporting Every Corner of Your Home. Use Them To Build The Most Magnificent Industrial Shelves, Wine Bottle Tiki Torches, Curtain Rods, Flower Vases, Tables, Mailboxes And Barns. If You Are the Creative Type, You Will LOVE These.
✔QUALITY: Designed With Superior Quality Galvanized Malleable Iron.
✔DIMENSIONS: This PEX Support 3/8 in. Measures 1-3/8 in. W x 3-5/16 in. L. It Accepts a 3/8 in. Threaded Rod and 2 #12 Screws. Max Load is 180..
✔ULTRA-STURDY MOUNTING: These Pipe Hanger Supports Were Designed for Use in Heavy Duty Applications! They won’t Buckle under Pressure and Will Perform Beautifully in the All Commercial and Residential Applications.

Check Stock

Proman Products Valet Stand, 43.5\

Curved Wide Shoulder Hanger: Classic smooth-curve crafted wood hanger perfect for coats, suits, jackets and shirts.
Extendable Hanger Top Squared Bar: The stylish squared bar allows to hold extra pants and clothes, and both ends can be simply extended for ties, belts, and bags.
Key Rack and Under Rack Rod: Keys and wallet can be kept on the rack and the rod under the rack provides more hanging spaces.
Shoe Rack Base: The base of the Valet is also a shoe rack for convenience.

Check Stock

Adjustable Closet Rod for Hanging Clothes, 28 to 42 Inch Adjustable Closet Hanging Rods, Metal Space Saver Extender Closet Bar for Wardrobes, Laundry Room, Shoe Cabinets

Adjustable Closet Rod: You can extend the closet tension rods and adjust to accurate length as wanted, fit perfectly in small 28 to 42 inch space.
Heavy Duty Hanging Rod: Constructed of steel in diameter of 1 1/8 inch, this closet bar can hold your coats and heavy hooded jackets, even anything without slipping, bending or crashing.
Rust Proof Closet Rod: This closet rod is solid, sturdy, extends smoothly, won’t get rusted and stained your clothes.
Multi Purpose Closet Bar: Adding this closet rod to the existing rack system, or install in the laundry room, relatively narrow doorways, walk in, as room divider rod, laundry room hanger rod, indoor garden hanger rod.
Easy Set up: Just make sure insert the thicker rod into the large flange, thin rod into small flange. Each closet hanging rod has warranty of 12 month, anything wrong with the item, please message us for replacements or refund.

Check Stock

26 Pack 8/32 Inch Threaded Rods with Hex Nuts M4 12 Inch 304 Stainless Steel Fully Rod Threaded, 13 Pcs M4 300mm Right Hand Threads, 13 Pcs Hex Nuts for Hangers, U-Bolts and Beaded Garden Stake Rods

【THREADED RODS PARAMETERS】Thread Diameter M4: 2.8mm/0.11 ''.
【MATERIAL】304 stainless steel material, corrosion resistance, high temperature resistance, rust resistance and good processing performance.
【FULL THREAD & HEX NUT】For assembly and fastening, threaded rod is a fastener reinforced in threaded nut or threaded hole, right-hand threaded rod stud. Hexagonal nuts are an ideal replacement for industrial and construction fasteners, Simply screw on to a bolt of the same thread size, quick and easy..
【APPLICABLE SCENARIOS】Perfect for auto parts, standoffs, bolts and more metal items that need to be fastened.
13 Pcs full threaded rods, 13 Pcs full threaded hex nuts, 26 Pcs in total, perfect for garden stakes decorative beaded garden stakes etc for outdoor decoration..
【PACKAGE LIST】13Pcs M4×300mm threaded rods, 13 Pcs M4 Stainless Steel Fully Threaded Hex Nuts, which can be cut, heated, drilled and used in multiple dimensions..

Check Stock