Best Thread cutting Screws

Spax M Countersunk Head with Milling Ribs, Partially Threaded T-Star Plus with Cut Point, 4 x 40 MM, Galvanised, 200 Stück

Use: For screwing MDF materials and other thin-walled panels made of wood-based materials indoors. Spax-exclusive Wirox surface.
Countersunk head with milling ribs pulls particularly easily into the material and can be recessed flush Optimum power transmission and clean fit with Spax bit T-Star plus T20 with guide pins.
and longer battery life: no pre-drilling (depending on the wood). Precise positioning and reduction of the splicing effect thanks to the drilling function of the CUT tip. Easier cutting of the wood fibre thanks to Spax-typical wave profile.
Made in Germany: TUV certified. Certified for use in the technical approval for screws as a wood connecting medium in carrying wood constructions (ETA-12/0114).
Box contents: 1 Spax-M box, 200 pieces MDF screws, T-Star plus countersunk head, 75° milling head, partial thread, CUT tip, Wirox surface, thread diameter (Ød1) = 4 mm x total length (Ls) = 40 mm, partial thread length (LgT) = 28 mm, head diameter (Ødk): 7 mm, bit not included.

Check Stock

Spax – Universal Screw 3/blank Galvanised Partially Threaded, Countersunk T-Star plus 4Cut, A2J – 0191010350303, 191010400303

Usage: Universal indoor or outdoor without direct exposure to weather elements. Exclusive WIROX coating from SPAX聽: Corrosion resistance 20 times stronger than standard white galvanized coating.
MULTI head: Easy penetration and simplified screwing. Mills in wood and stops on metal. Optimal power transmission and better fit on the T20 bit, even with overhead work, thanks to the T-STAR plus guide pin.
Power and battery saving: no need for pre-drilling (depends on wood). Easy screwing. Reduction of wood splitting with four-sided 4CUT tip. Typical SPAX corrugated profile for easier separation of wood fibers.
Made in Germany : TUV certified. Officially approved: European Technical Approval for self-tapping screws for assembling wood (ETA-12/0114).
Contents: 1 SPAX box, 200 universal screws, T-STAR plus, Countersunk head, Partial thread, 4CUT point, WIROX coating, Thread diameter (脴d1)= 4mm x Total Length (Ls) = 30mm, Length of partial thread (LgT) = 18mm, Head diameter (脴dk) = 8mm, Bit not included.

Check Stock

Taezn 40 Pieces Wall Plate Screws 1.2 Inch Long Outlet Screws Perfect Replacement for Outlet Cover Screws,Switch Plate Screws Light Plate Screws

【Package Content】You will receive 40 pieces 1.2 inch long 6-32 thread white wall plate screws. extra long size and Sufficient amount to meet your needs.
【Elegant Design】Our long outlet cover screw features a slotted oval head with nice white paint cover and wear-resistant, giving the outlet a good quality appearance, proper and beautiful.
【High Quality】Our extra long electrical outlet screws are made of carbon steel, sturdy and durable. Thread cuts are flawless, head shape is stunning and elegant, paint is pure and perfect.
【Wide Applications】Light switch plate screws are suitable for home, office and other occasions. Can be used to replace lost or painted over screws, ugly screws, old looking screws and so on.
【Particular Attention】 Please check whether your wall plate matches our size before purchasing. Our package contains a free plastic box to store and carry.

Check Stock

#14 x 4 Marine Grade Type 316 Stainless Steel Deck Screw Square Drive Bugle Head Quantity 500 Type 17 Wood Cutting Point 2-3/4 of Thread Length 14 Screw Diameter 4 Screw Length

HIGH QUALITY STAINLESS STEEL: These #14 Wood Screws (Drywall Screws) are high quality grade Marine Grade Type 316 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today..
Type 316 steel is an austenitic chromium-nickelstainless steel that contains between two and three percent molybdenum. The molybdenum content increases corrosion resistance, improves resistance to pitting in chloride ion solutions and increases strength at high temperatures. Type 316 Stainless is more resistant to corrosion than 18-8 stainless but not as strong. Ideal for Salt Water envirovments or chemical exposure environments..
Type 17 Point - This thread cutting screw is ideal for use with wood.
it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling.
Features a Bugle Head, and a Square drive to be used with a #3 Square Drive.
Size Number: #14 / Length of Screw is 4" inches with 2-3/4" inches of thread.

Check Stock

#14 x 5 Marine Grade Type 316 Stainless Steel Deck Screw Square Drive Bugle Head Quantity 100 Type 17 Wood Cutting Point 3-1/4 of Thread Length 14 Screw Diameter 5 Screw Length

HIGH QUALITY STAINLESS STEEL: These #14 Wood Screws (Drywall Screws) are high quality grade Marine Grade Type 316 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today..
Type 316 steel is an austenitic chromium-nickelstainless steel that contains between two and three percent molybdenum. The molybdenum content increases corrosion resistance, improves resistance to pitting in chloride ion solutions and increases strength at high temperatures. Type 316 Stainless is more resistant to corrosion than 18-8 stainless but not as strong. Ideal for Salt Water envirovments or chemical exposure environments..
Type 17 Point - This thread cutting screw is ideal for use with wood.
it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling.
Features a Bugle Head, and a Square drive to be used with a #3 Square Drive.
Size Number: #14 / Length of Screw is 5" inches with 3-1/4" inches of thread.

Check Stock

POWERTEC QWS1005#8 x 3/4” Wood Screw Set, Phillips Flat Head Deep Thread Screws - 100 Pack

INCLUDES: #8 x 3/4 Deep Thread Wood Screws (100 pack).
FUNCTION: These flat heads are primarily used in applications where the head of the fastener must sit flush with the mating surface, connecting wood to wood, attaching hinges or as wood fasteners hardware for wood projects.
FEATURES: A short screw construction, with a fine deep cut Philips drive to help minimize bit slippage, stripping or damage to your screw.
PREMIUM: These deep thread wood screws are made with durable carbon steel, and finished with a smooth zinc plated coating for added corrosion protection.
SPECIFICATIONS: Diameter: #8 | Length: 3/4” | Head Style: Flat | Thread Type: Deep Coarse | Quantity: 100 pcs | Material: Carbon Steel | Finish: Zinc Plated.

Check Stock

#10 x 3-1/2 Marine Grade Type 316 Stainless Steel Deck Screw Square Drive Bugle Head Quantity 100 Type 17 Wood Cutting Point 2 1/4 of Thread Length 10 Screw Diameter 3 1/2 Screw Length

HIGH QUALITY STAINLESS STEEL: These #10 Wood Screws (Drywall Screws) are high quality grade Marine Grade Type 316 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today..
Type 316 steel is an austenitic chromium-nickelstainless steel that contains between two and three percent molybdenum. The molybdenum content increases corrosion resistance, improves resistance to pitting in chloride ion solutions and increases strength at high temperatures. Type 316 Stainless is more resistant to corrosion than 18-8 stainless but not as strong. Ideal for Salt Water envirovments or chemical exposure environments..
Type 17 Point - This thread cutting screw is ideal for use with wood.
it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling.
Features a Bugle Head, and a Square drive to be used with a #2 Square Drive.
Size Number: #10 / Length of Screw is 3-1/2" inches with 2-1/4" inches of thread.

Check Stock

Helonge Wall Plate Screws,100 Pcs #6-32 Thread Screws for Wall Plates, Perfect Replacement for Wall Outlet Cover Screws,Switch Plate Screws, Screw in Light Socket Power Outlet,etc. (9mm)

【Elegant Design】Our outlet cover screws feature a slotted oval head with a nice white paint cover and wear-resistant, giving the switch outlet a good quality appearance, proper and beautiful.
【Wide Application 】These white outlet cover screws are designed to fix wall outlets in your home/office or to replace broken or lost screws. Great replacements for “dropped” switch plate screws.
【High Quality】Our electrical outlet screws are made of carbon steel, sturdy and durable. Thread cuts are flawless, head shape is stunning and elegant, paint is pure and perfect.
【Size】: 100 Pcs. #6-32 thread, Total Length: 9mm.Standard size for most duplex and toggle wall plates..

Check Stock

100 Packs Wall Plate Screws Taezn Outlet Cover Screws 4 Length Sizes 6-32 Thread Switch Plate Screws Perfect Replacement for Wall Outlet Screws Light Plate Screws White Screws for Wall Plate etc.

【Package Content】You will receive100pcs #6-32 thread white wall plate screws, including 40pcs 3/8'' long, 20pcs 9/16'' long, 20pcs 3/4'' long and 20pcs 1'' long. Perfect size for you to choose from, original or long wall plate screw.
【Elegant Design】Our light switch screws feature a slotted oval head with nice white paint cover and wear-resistant, giving the switch outlet a good quality appearance, proper and beautiful.
【High Quality】Our electrical outlet screws are made of carbon steel, sturdy and durable. Thread cuts are flawless, head shape is stunning and elegant, paint is pure and perfect.
【Wide Applications】White outlet screws are suitable for home, office and other occasions. Can be used to replace lost or painted over screws, longer screws, old looking screws and so on.
【Particular Attention】 Please check whether your wall plate matches our size before purchasing. Our package contains a free plastic box to store and carry.

Check Stock