Best Thin Mini Itx

250 watt Pico PSU ATX Switch PSU Car Auto Mini-ITX Power Supply with Adapter Board for Computer Mainboard and car/Motorcycle

Note：input power 11.4V-12.6V,don't too low or highg,or will be damaged！Please read the Product Description before use!.
250 Watt Pico PSU ATX High Mini-ITX Power Supply with adapter board.
Pico power supply Short-circuit protection: output shut down when short-circuit.
DC input connector: 2.5mm inner diameters, 5.5mm outer diameter.
The atx power supply with 24 pin ATX connector, Plugs directly into the ATX connector.
Perfect DC PSU for mini ITX Motherboards.

Meshed front panel for increased intake of ambient cool air.
Supports Mini-ITX motherboards for small profile builds.
Unique HDD/SSD mounting bracket positioning allows more space inside.
Supports 120 mm water cooling kit at the front of the case.
Supports 120 mm water cooling kit at the front of the case thanks to HDD/SSD mounting style.
Supports standard ATX PS2 sized power supplies.

Double curved tempered glass panel, IMAX borderless field of view, graphics card can be seen on three sides..
Designed for MINI ITX graphic card, MAX GPU length is 200mm..
Supports Mini ITX motherboard, SFX PSU and 240mm radiator..
High efficiency cooling design, 2 x 120mm reverse cooling fan which installed in bottom of the case, 240mm water cooling supported on the rear and special power supply cooling holes..
Great cable management, hidden cables design on the top, magnetic washable dust-proof net..

Supports M ATX and Mini ITX Form Factor Motherboards. Motherboards 6.7” x 6.7” (Mini ITX) , 9.6” x 9.6” (Micro ATX).
Designed for use in either a vertical or horizontal orientation on the motherboard.
Chamber concept design with optimized cable management space for small form factor builds.
Stackable and flexible thermal solution. Remarkable expansion. Advance ventilation.
2x USB 3.0, 1x Headphone, 1x Mic Front Ports, Internal Bay: 3x 3.5 inches or 2.5 inches.

Stands only 15mm thickness(17mm with Anit-Vibration Rubber), the thin frame design is ideal for Small Form Factor computer case fan((HTPC, Mini-ITX....
Sealed Precision Fluid Dynamic Bearing: the bearing and the spindle are made of high quality compressed metal and are lubricated by a special oil film....
Optimized performance to noise ratio, premium quality with Anti-Vibration rubber on the corners reducing possible vibration during operation..
Newly designed blade and frame contribute high airflow with low noise. PWM control offers wide range fan speed for excellent balance of performance....
Dimension: 120x120x15mm(17mm with Anit-Vibration Rubber), Fan Speed: 300±200～1200 rpm±10%. Noise rate: 2.7 to 23.9dBA, Air Flow: 8.28 - 33.86CFM.....

Slim design only 15mm thickness(17mm with Anit-Vibration Rubber), this thin fan is ideal for SFF computer(HTPC, Mini-ITX case) or low profile CPU....
Newly designed blade and frame contribute high airflow with low noise, ideally for computer case, radiator/heatsink and CPU cooler. PWM control offers....
Using Sealed Precision FDB for long life span and quiet operation.Included antivibration rubber pads covering each corner of frame. These decouplers....
8 high quality LEDs built into central hub, the lighting is bright and even reflected with milky-white blade. The 4-pin 12V RGB connector allows fan....
Connector: 4-Pin, Dimension: 120x120x15mm(17mm with Anit-Vibration Rubber), Fan speed: 300±200~1800±10% RPM, Airflow: 8.28~50.79CFM, Noise:....

Supports M ATX and Mini ITX Form Factor Motherboards. Motherboards 6.7” x 6.7” (Mini ITX) , 9.6” x 9.6” (Micro ATX).
Designed for use in either a vertical or horizontal orientation on the motherboard.
Chamber concept design with optimized cable management space for small form factor builds.
Stackable and flexible thermal solution. Remarkable expansion. Advance ventilation.
2x USB 3.0, 1x Headphone, 1x Mic Front Ports, Internal Bay: 3x 3.5 inches or 2.5 inches.

Product introduction: 250 Watt Output 12 Volt DC Input,Fanless design, 100% silent,24 pin ATX connector, Plugs directly into the ATX connector,Perfect DC PSU for mini ITX Motherboards.
Working operation: Input voltage: +12V/DC(11.4-12.6V), DC input: 2.5mm inner diameters, 5.5mm outer diameter, Input Current: Max. 21A, Output Power: 250W, Power Efficiency: >= 85%, Working temperature/humidity: 15℃ to 35℃ / 45%-75%, Reposition temperature//humidity: -40℃ to +70℃/ 10%-90%, Atmospheric pressure: 86Kpa—106Kpa.
Strong durability: Adopt industrial solid capacitor, ideal for being used in harsh evironment, High performance with high heat-stand feature, more reliable, Solid Polymer Caps on the PCBA, Long life.
Wide range of applications: MINI computers, one computer, POS, digital set-top boxes, ITX chassis, network servers, advertising, banking terminals, etc.
Package includes: 1 x DC-ATX 250W Module (with cable).