Best Thermally Conductive Adhesive

2pcs, 99.9% Copper Tube, T2 Copper Metal Tube, for Heat Conduction Equipment, 500mm Long, 1mm Wall Thickness, Outer Diameter,3mm

  • Available in 3 different outer diameters: 3mm, 4mm, 5mm, wall thickness: 1mm, length: 500mm..
  • 99.9% copper tube, T2 copper metal tube, high purity, fine structure, low oxygen content and high strength..
  • Second only to silver in electrical conductivity and thermal conductivity, it is widely used in the manufacture of thermally conductive and thermally conductive devices..
  • Good heat resistance, ductility, corrosion resistance, weather resistance and processability. Easy to solder and solder. The surface is smooth and seamless..
  • Applications: DIY projects, handicrafts, architectural models, architectural decoration, industry, garden products, wires, heat conduction, etc..
Check Stock

uxcell Heat Resistant Tape - High Temperature Heat Transfer Tape Aluminum Foil Adhesive Tape 55mm x 20m(66ft)

  • Material: durable aluminum foil and silicone..
  • One-side self-adhesive design. Heat resistance: Instantaneous:about 300C / 572F.
  • Increases temperature efficiency, making this dryer foil tape great for insulation, heat sinks, AC-units, heaters and vents..
  • Chemically resistant, thermally conductive (helping cooling/heating efficiency), heat and light reflective..
  • This Metallic Furnace Duct Tape for HVAC is great for sealing hot and chilly air ducts, repairing metal seams and insulating aluminum duct pipes..
Check Stock

Thermal Adhesive Tape 20mm by 25M, HPFIX High Performance Thermally Conductive Tape Apply for Coolers, Heat Sink, LED Strips, Computer CPU, GPU, Easy to Apply & High Durability

  • ???? HPFIX thermal adhesive Tape is a simple and practical heat conductive tape, very easy to use, even for beginners..
  • ???? Thermally conductive tape has very strong adhesion and has good thermal conductivity. It is often used on heat sinks- efficiently transfer heat dissipation for electronics. If combined with thermal paste, the effect will be better..
  • ???? HPFIX thermal tape has thermal conductivity 1.5 W/m-k to meet most of electronics heat dissipation demands..
  • ???? Thermal tape is widely used for high power LED,High power power supply, Computer CUP, GPU, automotive electronic heating module, motor controller, communication equipment, power semiconductor, MOS tube,GBT chip,Video Card RAM, DDR Memory Modules, SSD drives, new energy heating power..
  • ???? Themral tape heat conductivity is high and stable, its life is longer than the general heat-dissipating double-sided sticker, and it can work for at least 5 years at normal temperature (80-120°C )..
Check Stock

2pcs, Copper Metal Round Tube, 99.9% High Purity Copper Tube, Good Thermal Conductivity/Ductility, 500mm Long, 1mm Wall Thickness,Outer Diameter 14mm Inner Diameter 12mm

  • Available in 3 different outer diameters: 12mm, 14mm, 15mm, wall thickness: 1mm, length: 500mm..
  • 99.9% copper tube, T2 copper metal tube, high purity, fine structure, low oxygen content and high strength..
  • Second only to silver in electrical conductivity and thermal conductivity, it is widely used in the manufacture of thermally conductive and thermally conductive devices..
  • Good heat resistance, ductility, corrosion resistance, weather resistance and processability. Easy to solder and solder. The surface is smooth and seamless..
  • Applications: DIY projects, handicrafts, architectural models, architectural decoration, industry, garden products, wires, heat conduction, etc..
Check Stock

AVNTKER Double Sided Thermal Tape 1-inch/25mm Super Strong Adhesive Non Conductive Heatsink Sticky Tape for CPU, GPU, SSD Drive, HDD, VGA, PCB, LED Strips, 3D Printer, Raspberry Pi Radiator

  • Material: Double sided thermal tape is made of a mixture of acrylic polymer, thermal conductive ceramic powder and silicone adhesive, full roll size 20m x 25mm x 0.25mm (Length:66 feet x Width:1-inch).
  • Excellent Performance: Thermally conductive sticky tape has super stickiness and can firmly fix the heatsinks to the heating element, effectively improving the heat transfer between electronic components. (substitute screws, rivets, welds, fastener and liquid glue).
  • High Durability: Thermal duct tape has extremely stable performance, durable adhesion on both sides, no residual glue, and can work for a minimum of 5 years in high temperature environment of 80-155°C. ( If combined with heat conduction paste or cooling silica gel pad, the effect will be better ).
  • Security Application: The heat dissipation tape is insulative and non-conductive, which eliminates any risks of causing short circuit, adding more protection to the CPU, GPU, VGA cards, HDD, SSD drive, VRAM, M2 hard disk, Water cooling kit, Laptop, PCB, IGBT, Mos tubes, Diode, Triode, Circuit board, Logic board, Raspberry pi, LED cooler, 3D printer.
  • Widely Applications: Heavy duty two sided stick tape can be used for attach aluminum/copper heat sinks to heating element, fixed the carpet to prevent sl....
Check Stock

Arctic Silver Thermal Cooling Compound Paste 3.5g High-Density Polysynthetic Silver by Nabob Deals with Bonus Tool

  • Arctic Silver 5 contains over 88% thermally conductive filler by weight. In addition to micronized silver, Arctic Silver 5 also contains sub-micron zinc oxide, aluminum oxide and boron nitride particles..
  • Its unique high-density filling of micronized silver and enhanced thermally conductive ceramic particles, Arctic Silver 5 provides a new level of performance and stability.
  • Bonus Tool will come in handy rather then getting your hands dirty.
  • 3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.
  • Coverage Area: A 3.5 gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003″ thick, the 3.5 gram syringe will cover approximately 16 square inches..
Check Stock

3M 425/SI160 Scotch 425 Aluminum Foil Tape: 1" x 60 yd, Silver

  • 3M Aluminum Foil Tape 425 has excellent heat and light reflection to protect against high temperature and ultraviolet (UV) degradation. It’s also an effective barrier against moisture, dust, flame, dirt and mild chemicals used in paint stripping and masking..
  • The thermally conductive backing of 3M 425 helps maximize efficiency by dissipating heat over a wider surface area. The synthetic acrylic adhesive provides superior temperature, U.V., and solvent resistance to produce a strong, lasting and reliable bond. It provides excellent age life and is ideal for harsh, long-term indoor and outdoor environments..
  • Uses and applications include aircraft paint stripping masking (approved by the Department of the Navy Technical Order TO 1-1-8), moisture barrier in “white goods” appliances, general-purpose heat reflector and heat dissipator, mechanically holds wires and cooling coils in “white goods” appliances, and more. Carrier/Backing: aluminum foil. Adhesive: synthetic acrylic. Thickness: 4.6 mils (carrier, adhesive) 2.8 mils (carrier)..
  • Adhesion: 47 ounces per inch (to stainless steel test panel). Tensile Strength: 30 pounds per inch (longitudinal). Service/Operating Temperature: -65F to 300....
Check Stock

3M 425/SI260 Scotch 425 Aluminum Foil Tape: 2" x 60 yd, Silver

  • 3M Aluminum Foil Tape 425 has excellent heat and light reflection to protect against high temperature and ultraviolet (UV) degradation. It’s also an effective barrier against moisture, dust, flame, dirt and mild chemicals used in paint stripping and masking..
  • The thermally conductive backing of 3M 425 helps maximize efficiency by dissipating heat over a wider surface area. The synthetic acrylic adhesive provides superior temperature, U.V., and solvent resistance to produce a strong, lasting and reliable bond. It provides excellent age life and is ideal for harsh, long-term indoor and outdoor environments..
  • Uses and applications include aircraft paint stripping masking (approved by the Department of the Navy Technical Order TO 1-1-8), moisture barrier in “white goods” appliances, general-purpose heat reflector and heat dissipator, mechanically holds wires and cooling coils in “white goods” appliances, and more. Carrier/Backing: aluminum foil. Adhesive: synthetic acrylic. Thickness: 4.6 mils (carrier, adhesive) 2.8 mils (carrier)..
  • Adhesion: 47 ounces per inch (to stainless steel test panel). Tensile Strength: 30 pounds per inch (longitudinal). Service/Operating Temperature: -65F to 300....
Check Stock

ELK Aluminum Foil Tape for Metal Repair, Air Ducts, Insulated Pipes, HVAC, Sealing Ductwork - Vapor, Exhaust and Heat Resistant Safe - Professional Grade Insulation Sealer (Silver, 1.88 in x 150 ft)

  • ...metal surfaces, plumbing, heating vent, copper pipe fixing, attic, crawlspace, crafts and more..
  • DURABLE: This heavy duty waterproof foil tape resists flames, moisture, vapor, UV degradation, odor shield, weather, some chemicals and smoke transmission. For both indoor and outdoor use. Chemically resistant, thermally conductive, heat and light reflective..
  • EFFICIENCY: Thermal conductivity helps cooling and heating efficiency, improving efficiency in systems. Provides a strong bond at low and high temperatures. Conformable backing and pressure sensitive adhesive means it will adhere properly to a variety of smooth and irregular surfaces..
  • GREAT VALUE: 1.88 inch wide x 150 feet (50 yards) long x 3.25 mil thick foil roll. Ensure that surface is clean, dry, free of grease, oil or other contaminants before applying metallic aluminum foil tape. Finish work with quality and speed..
Check Stock