Best Thermal Conductivity Humidity Sensor

Hzonder Brass Wire Cu Metal Wire DIY Jewelry Craft Wire Lead Free,0.8mm7000mm

  • The Brass Wire material is H62, has electrical conductivity, and is resistant to high temperature, humidity, chemical corrosion.
  • Our highly conductive Brass Wire It has good thermal, processing, ductility.
  • The application range of Brass Wire is very wide, including welding, decoration, DIY crafts, etc..
Check Stock

Wathai 36pcs 15x15x1.5mm High Performance Thermal Conductive Silicone Pad Cooling Heatsink for CPU GPU IC Chipset Northbridge

  • Package include: 36pcs thermal conductive pad.
  • Dimensions: 15x15mm；Thickness:1.5mm； Thermal Conductivity: 1.5(W/m-k)； Color: Blue；Weight: 25g or 0.88oz.
  • it has good thermal conductivity and electrical insulation properties,good stability,wide use of temperature..
  • Thermal Pad is an upgraded version of the thermal grease Paste, good thermal conductivity, Soft a little sticky, super electrical insulation.
  • Not electric conductive to prevent any electronic damage..
Check Stock

DGZZI 2PCS DS18B20 Stainless Steel Encapsulated Temperature Sensor Waterproof Digital Temperature Probe 1 Meter for Arduino

  • With high quality stainless steel tube encapsulation,the item is waterproof, moistureproof, rust-proof..
  • Sealing with high thermal conductivity sealant to guarantee high sensitivity and the minimum temperature delay of the temperature sensor..
  • Every probe is tested strictly to ensure it works normally..
  • This product is suitable for temperature measurement and control field freezer, silos, storage tanks, telecommunications room, power room, cable ducts, etc.
  • What is in the package: 2* DS18B20 Temperature sensor.
Check Stock

Wathai 100x100x3mm Blue Thermal Conductive Silicone Pad For CPU GPU IC PS3 PS2 Xbox Heatsink Cooling

  • Thermal Pad is an upgraded version of the thermal grease Paste, good thermal conductivity, Soft a little sticky, super electrical insulation, it can be arbitrarily cut size..
  • it has good thermal conductivity and electrical insulation properties,good stability,wide use of temperature,in -40 ℃ -200 ℃ range does not melt.
  • You can according to the size of the gap between the heating element and the heat sink to select the appropriate thickness of the thermal silica Pad, the size of the self-cutting..
  • Thermal pad also has Insulation, Non-conductive, wear-resistant, fire-retardant, compression, buffering, no damage to metal materials, etc effect..
Check Stock

CS LABS Thermal Paste & pad Replacement Set K5 PRO K5-PRO & K4-PRO compatible with iPhone, iMac PS4 PS3 Xbox Asus Dell etc

  • ...GPUs of various computers including iPhone, PS4, PS3, Apple iMac video boards. This is the only commercially available product at the moment that can replace the gummy thermal paste that is originally used by Apple. K5-PRO can replace soft thermal pads that are used on computers (up to 3mm thick).
  • K5-PRO has thermal conductivity K>5,3 W/m.K * (at least 3 times higher than common thermal pads that are used on computers and commercial electronics) .K5-PRO is applied very easily directly on the component and has no electrical conductivity. It can be heated up to 250 degrees (Celsius) and has a long operational life time (practically infinite after the installation).
  • K4-PRO is a high quality thermal paste designed for use on computer BGA components (GPU, CPU, etc).K4-PRO is a very low viscosity thermal paste (especially when heated during the first use). It will cover all the invisible gaps between the component and the heatsink without creating a film of paste like most low cost thermal pastes..
  • K4-PRO has thermal conductivity K>4,6 W/m.K * (3 times higher than common thermal pastes that are used on computers and commercial electronics).K4-PRO is applied very easily directly on the component and has no electrical conductivity. It can be heated up to 220 de....
Check Stock

Thermopad Thermal Grizzly Minus Pad 8 - Silicone, Self-Adhesive, Thermally Conductive Thermal Pad - Conducts Heat and Cools The Heating Elements of The Computer or Console (100 × 100 × 2,0 mm)

  • ...ips and GPUs of various computers including PS4, PS3, Apple iMac video boards. This is the only commercially available product at the moment that can replace the gummy thermal paste that is originally used by Apple. K5-PRO can replace soft thermal pads that are used on computers (up to 3mm thick).
  • K5-PRO has thermal conductivity K>5,3 W/m.K * (at least 3 times higher than common thermal pads that are used on computers and commercial electronics) .K5-PRO is applied very easily directly on the component and has no electrical conductivity. It can be heated up to 250 degrees (Celsius) and has a long operational life time (practically infinite after the installation).
  • K4-PRO is a high quality thermal paste designed for use on computer BGA components (GPU, CPU, etc).K4-PRO is a very low viscosity thermal paste (especially when heated during the fist use). It will cover all the invisible gaps between the component and the heatsink without creating a film of paste like most low cost thermal pastes..
  • K4-PRO has thermal conductivity K>4,6 W/m.K * (3 times higher than common thermal pastes that are used on computers and commercial electronics).K4-PRO is applied very easily directly on the component and has no electrical conductivity. It can be heated up to 220 deg....
Check Stock

Nab Cooling Thermal Pad 15 W/mK 90x50 Heat Resistance Non-Conductive High-Temperature Resistance Silicone Thermal Pads for Laptop Heatsink GPU CPU LED & PS4 90x50x1.0

  • Extreme Thermal Conductivity: With a thermal conductive value of 15W/mK, Nab Cooling’s thermal pad promises extreme thermal conductivity and reduces....
  • Easy installation: Unlike other thermal adhesives, the NB Supermax cooling pad is super easy to use. Just remove the plastic film, paste it on the....
  • Non-electrical conductivity: This silicon thermal pad GPU contains no metal and hence, is non-electrical conductive, which makes it safe to use. It....
  • Wide operating temperature range: NB Supermax thermal adhesive pad has an operating temperature of -60℃ to +220℃, making it compatible with a wide....
  • Safe to use: This thermal gap filler comes in 5 different thicknesses and is non-corrosive, non-toxic, non-curing, and odorless, making it super safe....
Check Stock

ACEIRMC 5pcs MQ-3 MQ3 Alcohol Sensor Module Breath Gas Detector Ethanol Detection Module for Arduino Raspberry Pi ESP8266 MQ3 5V DC (MQ-3)

  • Sensitive material MQ-3 gas sensor is used in clean air low conductivity tin oxide (SnO2)..
  • When there is alcohol vapor in the environment sensor, conductivity sensor with increasing gas concentration of alcohol in the air increases.
  • Use simple circuit can convert the change in conductivity of the gas concentration corresponding to the output signal..
  • High MQ-3 gas sensor sensitivity to alcohol, can resist the interference of gasoline, smoke, water vapor..
  • The MQ-3 sensor can detect a variety of alcohol concentration in the atmosphere, is a low-cost sensor suitable for a variety of applications.
Check Stock

Inkbird Digital Temperature Probe Controller ITC608T Thermostat 120V 15A 1800W Pre Wired AC Dual Stage Outlet 12 Period Timer Stage

  • US ETL Certificate Listed and Warranty. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety. The unit itself has 2 years warranty. (The temperature and humidity sensor have 1 year warranty.).
  • Three in one Multifunctional Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment..
  • More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not..
  • Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off..
  • Multifunctional usage. Temperature and humi....
Check Stock