Best The Chip On Board

ACEIRMC 3pcs ESP8266 Serial Wireless Module CH340 NodeMcu V3 Lua WiFi Internet of Things New Version Development Board Compatible with Arduino IDE/MicroPython (3pcs)

  • Power your developement in the fastest way combinating with NodeMcu Firmware.
  • Nodemcu Lua Lolin V3 ESP8266 development board is equipped with powerful ESP6266 microcontroller (ESP-12E) with 802.11 b / g / n WLAN and integrated 25dBm antenna. This development board consists of two more microcontroller: flash memory chip is 25Q32 4M (32mbit) and serial chip is upgraded CH340 chip..
  • Modern high level mature LUA based technology. It is an integrated unit with all available resources on board..
  • This wifi development board enables you comfortable prototyping by simple programming via Lua-Script or for Arduino code and breadboard-optimized construction (23 mm pin spacing)..
  • Modern Internet development tools such as Node.js can take advantage the NodeMCU with the built-in API to put your idea on the fast track immediately..
Check Stock

Ximimark 5Pcs 16CH Analog Digital Multiplexer Breakout Board Module CD74HC4067 CMOS Precise Module For Arduino

  • This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067. This chip is like a rotary switch - it internally routes the common pin (COM in the schematic, SIG on the board) to one of 16 channel pins (CHANxx)..
  • It works with both digital and analog signals (the voltage can’t be higher than VCC), and the connections function in either direction..
  • To control it, connect 4 digital outputs to the chip’s address select pins (S0-S3), and send it the binary address of the channel you want. This allows you to connect up to 16 sensors to your system using only 5 pins!.
  • Since the mux/demux also works with digital signals, you can use it to pipe TTL level serial data to or from multiple devices. For example, you could use it to connect the TX pins of 16 devices to one RX pin on your microcontroller. You can then select any one of those 16 devices to listen to. If you want two-way communications,you can add a second board to route your microcontroller's TX line to 16 device's RX lines. By using multiple boards, you can create similar arrangements for I2C,SPI,etc..
  • The internal switches are bidirectional, support voltages between ground and VCC, have low “on” resistance and low “off” leakage, and to prev....
Check Stock

ARCELI ESP-12E ESP8266 UART WiFi Wireless Shield Compatible with Arduino UNO R3

  • Standard pin interface to achieve full compatibility with the pitch Arduino Uno, Mega and so on. (Unless the standard size arduino, such as Nano, Mini).
  • 3.3V power supply using advanced chip (with the official expansion board power chip CC3000 same), so 3.3V Arduino board provided more accurate, so ESP8266 as official cc3000 chip work as normal, there is no gap..
  • It leads to a WiFi module power supply / service interface to facilitate developers to extend the power supply and maintenance..
  • Onboard ESP8266-12 stable industrial grade serial WiFi module, using an enhanced PCB antenna, signal better..
Check Stock

6pcs ESP8266 NodeMCU LUA CH340 ESP-12E WiFi Internet Development Board 4M Flash Serial Wireless Module for Arduino IDE/Micropython New Version

  • ESP8266 has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, and the entire solution, including front-end module, is designed to occupy minimal PCB area..
  • ESP8266 is a highly integrated chip designed for the needs of a new connected world.It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor..
  • This ESP8266 NodeMcu development board can be use for small temperature and humidity monitor in home automation project and works very well Compatible with Arduino development platform..
  • ESP8266 CH340 chip, power your development in the fastest way combinating with NodeMcu Firmware.
  • It's a IOT unit with all available resources on board, support smart link and smart networking..
Check Stock

FBHDZVV Audio Amplifier TPA3116D2 Dual Channel Digital Power Board XH-M543 DC12-26V 2x120W DIY Module High Power Stereo Amp Board for Car Vehicle Computer Speaker DIY Home Theater Audio System

  • Strong TPA3116D2 chip is a digital power amplifier chip, with low idle loss characteristics,makes it work well and quickly..
  • On board front-facing IC to improve the input sensitivity, high-definition sound quality..
  • It can be used for for car vehicle computer speaker, family audio and video, and empty square..
  • This product has the characteristics of loud sound ,the capacitance are large, ,excellent sound quality..
  • There is no solder joint on the back of the circuit board,the chip capacitors and the solder solder board together, so there is no possibility of short circuit..
Check Stock

SunFounder R3 BoardBundled with Mega 2560 R3 ATmega2560-16AU Board for Arduin

  • R3 board compatible with Arduino. The board for Arduino use ATMEGA16U2 chip, Faster transfer rates and more memory..
  • R3 board control using r3 ATmega328P chip. Includes new pin configuration (SCL, SDA, IOREF).Clearly print on the female header connector, more precise and easier to use the wire..
  • The mega 2560 R3 Board is 100% compatible with Arduino. Powered via the USB connection or with an external power supply. The power source is selected automatically..
  • The ATmega2560-16au has 256 KB of flash memory for storing code (of which 8 KB is used for the bootloader), 8 KB of SRAM and 4 KB of EEPROM (which can be read and written with the EEPROM library). Comes preburned with a bootloader that allows you to upload new code to it without the use of an external hardware programmer. It communicates using the original STK500 protocol (reference, C header files)..
  • This version is optimized in the original version, both to ensure consistent and compatible with the original, but also easy to use..
Check Stock

2 PCS Flip Folding Keyless Entry Replacement Key Fob Cover fit for 2010-2013 Kia Soul 2012-2014 Kia Rio Sportage Key Fob Case Shell

  • High Quality Material replacement case for 2010-2013 Kia Soul 2012-2014 Kia Rio ,without cricuit board and chip..
  • Include the Sticker on back in case. Pls check your key and the item image carefully.
  • Easy to assemble,just remove the fob blade to this new case and remove the cricuit board and chip to new case..
  • No program requried: use your fob cricuit board, it was programed before you bought it..
  • Comes with badge and screwdriver. Cut the new blade..
Check Stock

Bluetooth Amplifier Board 25W+25W HF63 Dual Channel Audio Amplifier DC 10-25V Digital Amplifier Module with TDA7492P Chip

  • High Quality : The amplifier board adopts TDA7492P power amplifier chip, high quality electronic components and military grade PCB board, durable in use..
  • 2 Channel : This board is designed with dual channel output, 25W left channel and 25W right channel, high transmission rate and good sound quality..
  • Bluetooth Connection : The amplifier board is designed with Bluetooth V2.1 module and power supply reverse connection protection, convenient and safe to use..
  • Application : This digital amplifier board is suitable for upgrading and refitting the idle sound box and DIY production. It is suitable for speaker of 4Ω, 6Ω, 8Ω, 16Ω (8Ω is the best)..
Check Stock

SunFounder Mega 2560 R3 ATmega2560-16AU Board Bundled with R3 Board and Ethernet Shield W5100 for Arduino

  • The mega 2560 R3 Board is 100% compatible with Arduino. Powered via the USB connection or with an external power supply. The power source is selected automatically..
  • The ATmega2560-16au has 256 KB of flash memory for storing code (of which 8 KB is used for the bootloader), 8 KB of SRAM and 4 KB of EEPROM (which can be read and written with the EEPROM library). Comes preburned with a bootloader that allows you to upload new code to it without the use of an external hardware programmer. It communicates using the original STK500 protocol (reference, C header files)..
  • This version is optimized in the original version, both to ensure consistent and compatible with the original, but also easy to use..
  • R3 board compatible with Arduino. The board for Arduino use ATMEGA16U2 chip, Faster transfer rates and more memory.R3 board control using r3 ATmega328P chip. Includes new pin configuration (SCL, SDA, IOREF).Clearly print on the female header connector, more precise and easier to use the wire..
  • With this Ethernet Shield, for Arduino board can be used to connect to internet. Can be used as server or client. Directly plug puzzle board, no soldering required. It is directly compatible with Arduino official Ethernet Library. It adds a micro-SD card slot, which can be ....
Check Stock