Best Tft Touch Screen

5 inch Touchscreen Monitor for Raspberry Pi DSI LCD Screen 800×480 Display for Raspberry Pi 4B 3B+ 3A+ 3B 2B B+ A+ CM3/3+ Compatible with Raspbian Ubuntu Kali WIN10 IoT RetroPie

  • 5 inch capacitive touch display for Raspberry Pi, 800×480 resolution,TFT wide angle, toughened glass touch panel.
  • 5 inch TFT screen capacitive touch control, support up to 5-points touch.
  • Supports Pi 4B/3B+/3A+/3B/2B/B+/A+, another adapter board is required for CM3/3+, supports Raspbian/Ubuntu/Kali and WIN 10 IoT, driver-free.
  • Mipi DSI interface, refresh rate up to 60Hz.
Check Stock

DIYmalls ILI9341 3.2 inch TFT LCD Display Screen Module 3.3V Resistive Touch Panel 320x240 w/SD Card Slot for Mega 2560 only

  • ILI9341 tft display has 40 pins, so it is not compatible with uno r3 and nano..
  • ILI9341 display works at 3.3V. If you use it with mega 2560, please insert TFT 3.2 shield, not directly connect board with tft lcd module..
  • You may need to set a suitable parameter in sketches to use this 3.2" touch screen, but it is not a difficult task..
  • If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page, click "Ask a question"..
  • ili9341 3.2 inch tft lcd can not work with esp32 board due to no SPI interface..
Check Stock

BIGTREETECH SKR Mini E3 V3.0 Control Board +TFT35 E3 V3.0.1 Touch Screen 32-Bit Silent Motherboard Integrated with TMC2209 UART Stepper Driver Compatible with Ender 3 Pro/5 3D Printer

  • ⭐【BIGTREETECH Combo Set】Comes with Bigtreetech SKR Mini E3 V3.0 control board and TFT35 E3 V3.0.1 touchscreen with dual modes as a set. Adopted the latest G0 series MCU-STM32G0B0RET6 main control chip packing excellent performances..
  • ⭐【Upgraded More Capabilities】Intergrated with TMC2209 mute stepper driver, BIGTREETECH SKR Mini E3 V3.0 control board offers silent performance as default, and supports dual Z steppers for linear rail and belt upgrades, filament runout support, automatic shutdown (UPS support), power-off resume, sensorless homing and so on..
  • ⭐【Impressive Heat Dissipation】The SKR MINI E3 V3.0 also looks aesthetic with upgraded designs.New heatsink and 3 PWM controlled fans serve to cool down the machine during printing, effectively improving performances on heat dissipation. A direct 3D printer control board replacement for Ender 3, Ender 3 Pro, and Ender 5 motherboards..
  • ⭐【Supports Touch/Graphic Display】TFT35 E3 V3.0.1 touch screen enables you to easily switch between the Marlin LCD emulator and touch screen with menu interface, simply by pressing and holding the selector wheel. It’s a plug and play on Ender series printers with BTT SKR MINI E3 V3.0 control board..
  • ⭐【Satisfying After-Sales Support】If you have ....
Check Stock

Ili9341 LCD Display Module, ILI9341 5V/3.3V 2.8\ TFT SPI Serial Port LCD Touch Panel Display Module, 240x320[with Touch(9 IO Drive)](Without Touch)

  • With PCB board (including power supply IC, touch IC, SD card cage) compatible 5110 interface. At least 4 IO driver are needed (without touch) , at least 9 IO driver are needed( with touch). 2.8 inch TFT LCD color screen, support 65K color display, and the display is colorful, high quality image display and wide viewing angle..
  • This 2.8-inch LCD module uses ILI9341 drive chip to drive 240*320 dot , with 240*320 resolution..
  • On-board level translation programs truly perfectly compatible 5V / 3.3V IO level, supports a variety of single-chip IO connection, professional and practical..
  • We strive to provide you with the highest quality product and the best customer experience, if you're not entirely satisfied, please just feel free to contact us at any time..
  • Buy it Confidence: Let you feel safe using, so you have a better using experience. Great value for money. If you have any problems, please fell free to contact us anytime. Our team w....
Check Stock

BIGTREETECH SKR Mini E3 V3.0 Control Board Integrated TMC2209 UART Stepper Driver Supports Marlin/Klipper Compatible Ender 3/Ender 3 Pro/Ender 3 V2 3D Printer Motherboard ZZB000590 Black

  • ⭐【Main Control Chip】BIGTREETECH SKR Mini E3 V3.0 control board adoptes the G0 series MCU-STM32G0B1RET6 or STM32G0B0RET6 ARM Coretex. integrated TMC2209 Silent stepper motor drive,Support runing Klipper&Marlin..
  • ⭐【Heat Sink Design Upgrade】New upgraded to integrated large stepping motor driver aluminum heat sink,strengthen the drive heat dissipation capacity, and greatly improve the motherboardc heat dissipation performance..
  • ⭐【Multiple Functions】It Supports BLTouch, RGB lights,Filament detection, Automatic shutdown,power-off reesume, Display supports TFT35 E3 V3.0.1/TFT35 V3.0.1/TFT28/TFT43/TFT50/TFT70 V3.0 touch screen as well as original 12864 LCD of Ender 3 printer..
  • ⭐【Fan Upgraded】Increase Three CNC heat dissipation controllable fan interface to reduce the printer temperature when the device is working..
  • ⭐【Multiple Compatibile】BIGTREETECH SKR MINI E3 V3.0 Control board is design for Ender 3,plug and play,compatible with Ender V2 Ender 3/ende 3 pro/ender 5/ender 5 pro/CR-10 3D printer, the firmware is pre-install well before we ship out, you can select the firmware base on your needs..
Check Stock

Ciyoo N1 IP67Waterproof Fitness Smartwatch for Women ,Fitness Tracker Watch with Heart Rate Monitor Step Sleep Tracker Jewelry Watch White

  • Fashion Design -Fashion women appearance design, low-key and simple watch strap and flip the wrist screen switch, show a unique charm design.Finally,....
  • The intelligent LED display design allows you to quickly and easily adjust the pattern with your fingertips. The bracelet will vibrate to remind you....
  • Large screen full touch, TFT true color screen.
  • High Sensitivity Touch Screen - The 0.66 inch white light level screen allows information to be clear on the screen.With the round screen operation,....
  • Convenient Health Count —This journey smart watches, by scanning or code, “Droihealth " in the app store market search in real-time records your....
Check Stock

Adafruit Power Relay FeatherWing [ADA3191]

  • High speed SPI display with digital I2C touchscreen driver.
  • Single-touch capacitive touch bonded on top.
  • 240x320 resolution, 18-bit GPU, 262, 000 color - our library uses 16 bit color mode. Ili9341 (data sheet) controller with built in video ram buffer.
  • We also have a touch screen library that detects x, Y and Z (pressure) and example Code to demonstrate all of it. The Code is written for arduino but can be easily ported to your favorite controller.
  • Works with any classic arduino '328. Solder closed three jumpers to use the icsp header for use with leonardo or Mega! 2.8" diagonal color touchscreen TFT.
  • Touchscreen controller requires I2C pins sda and Sca. Microsd pin requires digital #4.
  • That means you can use digital pins 2, 3, 5, 6, 7, 8 and analog 0-5. Pin 4 is available If not using the MicroSD.
Check Stock

GeeekPi Raspberry Pi 4 TFT 3.5 inch Touch Screen with Case, Raspberry Pi Fan and Heatsinks, 320x480 Resolution LCD Display for Raspberry Pi 4 Model B (Raspberry Pi Board NOT Included)

  • This kit contains an ABS case and a 3.5 inch resistive touch screen. It’s fully compatible with Raspberry Pi 4 Model B. NOTE: Raspberry Pi Board NOT Included! The fan and screen can not be installed at the same time..
  • The 3.5 inch resistive touch screen can be directly inserted into any version of the Raspberry Pi boards, but the ABS case is only compatible with Raspberry Pi 4B.
  • The resolution of 3.5 inch touch screen can be adjusted by software.
  • The screen support 125MHz SPI signal input, the refresh rate is about 50fps which is enough to play the videos or games and display stable without flicker.
  • It supports Raspbian, Ubuntu, and Kali system, the drivers and image are provided freely..
  • Package includes: 1x ABS Case for Raspberry Pi 4B, 1x 3.5 inch TFT resistive touch screen, 1x Aluminum heatsinks, 1x Touch Pen, 1x 30x30x7mm cooling fan (NOTE: this fan can not be installed with 3.5 inch screen at the same time).
Check Stock

3.5 inch TFT LCD Display Screen, 320x240 Resolution Compatible Display Module, LCD Display Screen 54pin

  • 【HIGH QUALITY】▶RGB LCD Display Screen is 100% brand new and high quality..
  • 【DISPLAY SCREEN】▶This product is 3.5inch TFT LCD display screen, with resolution of 320RGB x 240..
  • 【COMPATIBLE】▶This TFT LCD display is compatible with LQ035NC111 54pin LCD..
  • 【THREE MODES】▶The TFT LCD screen has 3 kinds display mode: TN, Normally White, and Transmissive..
  • 【INTERFACE】▶Signal interface digital RGB (8/24-bit) + Serial Peripheral Interface, CCIR601/656 , 54 pins , FPC..
Check Stock