Best Tft Touch Panel

HiLetgo 2.4\ SPI TFT LCD Display 2.4 Inch ILI9341 Touch Panel LCD ILI9341 240x320 5V 3.3V

Check Stock

HiLetgo 2.4\ ILI9341 240x320 TFT LCD Display with Touch Panel LCD for Arduino UNO MEGA2560

  • 2.4" diagonal LCD TFT Touch Panel display.
  • Bright, 4 white-LED backlight, on by default but you can connect the transistor to a digital pin for backlight control.
  • Colorful, 18-bit 262,000 different shades.
  • 8 bit digital interface, plus 4 control lines.
Check Stock

BIGTREETECH TFT35 E3 V3.0.1 Touch Screen Display RepRap Smart Controller Panel Compatible with SKR Mini E3 SKR E3 DIP Board for Ender 3 CR10 3D Printer

  • ❤【Touch Screen for Ender 3 】Appearance size: 93*87mm, power input : 5V. This is a 3.5 inch full-color screen with ultra clear interface and responsive touch, it is designed for ender 3 3d printer especially, which can be a drop-in replacement for its original LCD screen..
  • ❤【Two Working Modes】TFT35 E3 V3.0.1 touch screen support UART serial port screen mode (touch screen mode) and 12864 screen mode, it can replace original display of Ender 3 3D printer. You can enjoy two printing modes: SD card and U disk..
  • ❤【More Extension Ports is Reserved】TFT35 E3 V3.0.1 display r eserve the extension port of filament breaking detection,automatic shutdown after printing,also WIFI function can be realized by external WIFI module through WIFI port..
  • ❤【Firmware Update】 TFT35 E3 V3.0.1 is easy and convenient to update firmware by SD card,download from our github, copy and save it to SD card.firmware must bed reserved ,then re-plug the SD card and wait to 10s.The firmware has been successfully updated..
  • ❤【Quality Warranty 】TFT35 E3 V3.0.1 touch screen is designed and....
Check Stock

Waveshare 7inch Capacitive Touch Display Compatible with Raspberry Pi 4B/3B+/3A+/3B/2B/B+/A+/CM3/3+/4 800×480 Resolution DSI Interface

  • Provide online user manual, please check the manual carefully before using!.
  • Supports Pi 4B/3B+/3A+/3B/2B/B+/A+, CM3/3+/4* (CM3/3+/4 requires extra adapter board).
  • 7inch TFT screen with a hardware resolution of 800x480. Capacitive touch panel supports 5-point touch..
  • As it directly drives LCD by the DSI interface of Raspberry Pi, the refreshing rate is up to 60Hz..
  • Supports Raspberry Pi OS / Ubuntu / Kali and Retropie. Support backlight adjusts by software..
Check Stock

Fafeicy 2.8\ ILI9341 SPI TFT LCD Touch Panel, 64k Serial Port Module, with PCB, 5V/3.3V 240x320, Integrated Circuit Ic

  • SPI TFT LCD Touch Panel is designed with one socket for sd card..
  • With PCB plate (including power supply IC, SD), compatible with 5110 interface.
  • 5V compatible, use with 3.3V or 5V logic..
  • This is a new 2.8 inch serial SPI color display module with touch function..
  • We strive to provide a product of the highest quality and the best customer experience, if you are not completely satisfied, do not hesitate to contact us at any time..
Check Stock

AUDIOTEK - AT-63BT- 6.5\ Double-Din AM/FM/MP3/MP4 Playable w/Bluetooth/USB/AUX/SD/DVD/CD Touchscreen Car Media Player Receiver System

  • HD Digital panel 800x480 High resolution TFT LCD Fix Panel | multimedia player - DISC/VCD/MP3/MP4/DIVX etc.
  • Preset car logo as power on display | Built in radio turner | One micro SD slot and USB 2.0 input on the front panel.
  • Built-in Bluetooth - Easy to connect to any electric devices like iphone, ipad, tablet, samsung galaxy etc | Built-in Internal microphone | Steering wheel connection | 4 x50W max power output.
  • Electronic Anti-Shock + Mechanical Anto-shock rear view camera input - Automactically switch to rearview when reverse gear is engaged.
  • Very sensitive touch screen for easy control - Screen background can be changed easily.
Check Stock

Screen Replacement for Samsung Galaxy S3 i9300 i9301 i535 TFT (Not Original) with Frame LCD Display Touch Digiziter Panel Repair Parts Kit,with Screen Protector + Tools (Black)

  • ✅Compatible Models ------ 【TFT】For Samsung Galaxy S3 i9300 i9301 i535 4.8inch LCD touch assembly. Please compare the model number. The picture quality of TFT screen may be lower than the original screen,please consider carefully which one is suitable before buying.Also, the failure of the phone due to reasons other than the LCD & touch will not be resolved by replacing this accessory. Please check the specific cause of the malfunction before purchasing..
  • ✅Strict Quality Control ------ All A-MIND products undergo strict quality inspection before shipment, make sure no scratches and dead areas in LCD. Pls connect the flex cable to test if it is in normal operation before installation. We reject any scratches and offer only A + quality products..
  • ✅Applications ------ Repair broken screens, heal liquid crystal ruptures, dead point pixels, touch inactivity, touch response problems, display problems, false color problems, non-functional screens, etc. Note: If your phone can no longer be used for any reason other than the LCD panel, replacing the LCD will not solve the problem, so please check the cause of the problem before purchasing..
  • ✅Installation suggestion ------ Not included Installation tutorials, If you are experienced in maintenance and h....
Check Stock

BIGTREETECH TFT35 V3.0 Touch Screen Display RepRap Smart Controller Panel Compatible with SKR V1.3 SKR PRO Board for 3D Printer Part

  • ❤【32 Bit High Performance Microprocessor】TFT35 V3.0 touch screen uses 32 bit ARM level Cortex-M3 series STM32F207VCT6,120MHz frequency....
  • ❤【Two Working Modes】TFT35 V3.0 Touch screen support UART serial port screen mode(touch screen mode) and 12864 screen mode,serial screen mode....
  • ❤【12864LCD Mode】The 12864LCD mode includes EXP1, EXP2, EXP3, where EXP1 and EXP2 are general motherboards LCD screen interface, while EXP3 is....
  • ❤【More Extension Ports is Reserved】 TFT35 V3.0 display reserve the extension port of filament break detection ,automatic shutdown after....
  • ❤【Firmware Update】 It is easy and convenient to update firmware by SD card,download from our github, copy and save it to SD card.firmware must....
Check Stock

LCD Touch Panels Touchpanel Analog for DOGM128-6 (EA TOUCH128-1)

  • Easy to Program - Includes complimentary GUI Software that makes programming fast and easy for engineers. This can reduce your project's time and expense. The LCD touch screen can easily create an intuitive touch interface by adding png/jpg/bmp/svg/gif image files as your background and defining functions by components. It's easy even for beginners..
  • Lots of Powerful Upgrades - New Launch Intelligent Series 7.0" TFT LCD monitor can be controlled by any MCU. This offers 1 G Hz Cortex A8 CPU driving device and 256 Flash memory for HMI projects. You also get RS232/TTL UART Interface and USB port. The module is compatible with 7/28V wide operation voltage. (This is an excellent choice for your Arduino and Raspberry Pi projects.).
  • Clear, Detailed, Hi Res HD - Our Smart HMI TFT LCD display offers excellent 800x480 high resolution with 4-wire resistance touch screen. Rich 262K (18bit) color for high color restore. Rectangular ratio 16:9 display format conversion. 70°/70°/50°/70° wide viewing angle, adjustable brightness(300 cd/m²) , TTF Font and contrast (500:1) offers you the ultimate project experience to accomplish more with improved results..
  • Ultimate TFT LCD Display Module for Industry - SCBRHMI Intelligent TFT-LCD Module Model STWI070WT-01 is....
Check Stock