Best Temperature And Pressure Relief Valve

American Standard CE-6-AS 6 gallon Point of Use Electric Water Heater

  • Inner Dura glas lined tank fired at 1,600°f for optimum protection from the effects of corrosion.
  • Factory installed Brass drain valve on all models allows for easy draining of the unit which reduces sediment deposits extending tank life.
  • Factory installed Brass temperature/pressure relief valve.
  • American standard point-of-use electric water heaters are all certified at 300 psi test pressure and 150 psi working pressure. All tanks are also 100% hydrostatically tested at the factory.
Check Stock

Acecare Charging Station Also Called Filling staion for Compressed air refilling

  • CONNECT. Connect compressor with valve to fill gases to tanks or pcp air guns..
  • WITH GAUGE. It is with gauge that shows the pressure in the tank or gun that receive the gases..
  • EASY TO INSTALL. It is easy to connect the valve and compressor, just very few steps..
  • WITH PRESSURE RELIEF KNOB. It is with pressure relief knob that will relief the rest pressure in hose to keep it safe when you take off it from valve..
  • WITH HOSE. The filling staion is with hose on it, and you do not need to prepare another hose when you fill gases..
Check Stock

MAREY 4 Gallon 1.44kW 120V corded Electric Mini Tank Water Heater White

  • Hot water on demand. 150 PSI Maximim Water Pressure. UL listed Temperature & Pressure relief valve included.
  • Under the sink hot water solution with a state of the art design, this unit stores 4 gallons of water.
  • Easy installation: Simply plumb into the waterline at the sink location..
  • Enhanced safety mechanisms: Thermostat Control allows adjustment of water temperature. Overheating protection device..
  • Comes with knob controls for temperature settings. Selectable temperature range between 77°F to 171°F.
Check Stock

MAREY 2.5 Gallon 1.44kW 120V Corded Electric Mini Tank Water Heater,White

  • Hot water on demand. 150 PSI Maximim Water Pressure. UL listed Temperature & Pressure relief valve included.
  • Under the sink hot water solution with a state of the art design, this unit stores 2.5 gallons of water.
  • Easy installation: Simply plumb into the waterline at the sink location..
  • Enhanced safety mechanisms: Thermostat Control allows adjustment of water temperature. Overheating protection device..
  • Comes with knob controls for temperature settings. Selectable temperature range between 77°F to 171°F.
Check Stock

3/4\ NPT 2PCS Lead Free Full Port Forged Brass Ball Valve, Full Port Heavy Duty Brass Ball Valve Shut Off Switch for Water and Oil

  • ...hut-off valves in the chemical and food industry or in the home or garden. The sides of the dispenser have female threads in accordance with ISO 7-1 (EN 10226-1) M-M..
  • The internal passage of the drain tap is straight for optimum and complete passage and therefore has a low flow resistance. The permissible operating temperature is -25°C + 180°C and the maximum working pressure is 40 bar.
  • The lever handle mounted on the top is used to close and open the ball valve, easy to use, pressure free or no pressure. The spherical seal is made of PTFE for maximum stability and durability even at very high temperatures..
  • Ball valves are widely used in mechanical equipment, industrial equipment, water supply and drainage equipment, for example in gardens, water pumps, corner rainwater tanks, external taps, rainwater connections with buckets, rainwater collectors, water pipes, etc..
  • This high pressure ball valve can be used as a rotary valve for steam, saturated steam, hot water, or as a plug valve for heating. The ball valve is suitable for pressures up to PN 40. The spindle is fixed in the relief area and the valve has an anti-static device..
Check Stock

The ROP Shop | 2400 PSI Power Pressure Washer Water Pump for Excell & Devilbiss VR2400, VR2500

  • ...ter Pump for Excell & Devilbiss VR2400, VR2500.
  • Specs - Maximum Pressure: 2400 PSI. Maximum Flow: 2.4 GPM. Maximum Pump Speed: 3400 RPM. Shaft Diameter: 7/8". 3 Bolt Pattern: 7 11/16” x 6 3/16” x 6 7/16” & 4" Center to Each Outer Hole. Maximum Water Temperature: 140° F. Inlet Connection Type: Standard Garden Hose. Outlet Tube Connection: 22mm Male. Refer to images 2 and 3 for more information.
  • Includes - (1) Vertical Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Outlet Tube (come installed).
  • This pump is for vertical gas engine driven units. In some instances, the pump may need to be removed to change engine oil. The mounting flange provides a convenient connection to most 7/8” diameter shaft vertical gas engines in 4.5-7 HP. The pump has a hole in the leg for draining the engine oil. The pump includes a built-in pressure control valve, downstream chemical injection system and thermal relief valve.
  • This has the outlet facing the front. Some specific pressure washers may require ....
Check Stock

Keg Regulator, Kegerator Regulator, Beer Regulator, Co2 Tank Regulator, Beer Keg Regulator, Co2 Regulator Gauge with CGA-320 Inlet, 0-60 PSI Working Pressure, 0-3000 PSI Tank Pressure By MRbrew

  • ????【No Leaks】The co2 regulator wears two tank washers to prevent leakage of the connection between the tank and the c02 regulator.
  • The relief valve on the keg regulator also has a food grade silicone washer to prevent leakage of the relief valve..
  • ????【Maintains Consistent Pressure】The lock ring can be quickly locked without re-adjustment, And maintains steady Co2 pressure with no leaks. Sturdy durable dual gauge beer regulator features a multi-stage body that gives you more precise control when making small adjustments to the output pressure..
  • ????【Easy to Adjust & Read】The kegerator regulator is easily adjustable by hand, Making adjustment effortless even at freezing temperatures. Whether it’s a bar, camping or family gathering, this beer keg regulator is your best choice..
  • ????【Relief Valve & Shut Off Valve】For added safety, The tap regulator has a manual pressure release valve that releases pressure at 55-65 PSI. There is also a shut off valve on the co2 pressure regulator that allows for instantly shutting off pressure to the keg without backing up your gas line and prevents backflow into the beer keg regulator..
  • ????【Care-free Warranty】Please feel free to contact us if any problem, we would try our best to h....
Check Stock

ATD Tools 3300 Cooling System Pressure Test Kit

  • Hand pressure pump with color coded 0-35 PSI gauge and push button pressure relief valve.
Check Stock

Shower System Faucet Set Wall Mounted Bathtub Spout Brushed Nickel 5 Function With 6 inches Powerful Rain Spray Shower Head (Matte Black)

  • ... brass body, presenting a quality shower system that is built to last. Made with craftsmanship, only to provide you more shower solutions. Also ,they are suitable for widely versatile with all kinds of decoration styles..
  • 【Pressure Balance Valve】:The Copper pressure valve is very flexible and adjusts the water temperature by turning the valve left or right. Spray hot and cold water as required with ease.It can effectively protect you from scalding injury caused by sudden changes in hot or cold water pressure, maintaining consistent water temperature..
  • 【Versatile Spray Function】:The 6 inches top shower head comes with 5 adjustable sprays. Full Body Spray, massage spray, power spray, and multiple settings for all your showering needs. Powerful water dispensing can effectively rinse the foam, stains on the body. The massage function, with moderate water output, provides comfort and relief from the day's fatigue..
  • 【Components】:The high-flow bathtub spout made of full-face zinc alloy has a powerful waterfall discharge that fills the bathtub in few time, making it easy for you to enjoy your time in the bath. The top spout is made of ABS plastic and can be easily removed for easy cleaning to prevent dirt buildup and calcification..
Check Stock