Best Telescopic Transmission Jacks

MEIRIYFA 6.35mm to Banana Plug Speaker Cable, 1/4 TS Speaker Wire Cord to Dual Banana 4mm Plugs Audio Cable OFC HiFi Speaker Wire for DJ Application, Mixer -2m

This 6.35mm TS to banana plug speaker cable is used to connect microphones and high-end guitars with TS jacks to speakers with banana head jacks, A / V receivers, amplifiers, mixers, post wall panels and surround sound receiver performs mono signal transmission..
This 1/4 ts mono to banana speaker cable uses 100% oxygen-free cable to achieve excellent signal transmission. Pure copper conductors improve fidelity. The outer diameter of the wire is 8mm. The anti-oxidation structure increases the service life of the wire..
The dual banana plug to 1/4 ts mono cable is gold-plated plug,sturdy and durable to plugging, and the plug is protected by a non-magnetic shell,and the transmission performance is stable. ensure natural sound accuracy and minimal signal distortion, sturdy and durable..
The OFC Speaker Wire is good improvement to your speakers sound,its fit you.After adding these wires, the change in sound quality was amazing.Suitable for high-power speaker equipment,No need to worry about cutting cables,improvement in the speaker's sound..
High Quality HIFI Speaker Cable,Each cable is hand made by professionals. Top quality and made by environment-friendly material good anti-aging, anti-cracking and other characteristics. The cable length is 2 meter..

Version 2.0, functional upgraded with dual springs, higher pressure, increased the stability and the lift speed.
This is our newest 1300LBS / 0.6T Upgraded Hydraulic Pressure Transmission Jack, with which you can easily guide a transmission safely and securely. It is features fully adjustable saddle with corner brackets. Comes with foot operated pump and lowering pedal, great lift range by telescopic two-stage hydraulic ram, wide 4-leg base with swivel casters for stability and easy movement. It's ideal for any automotive or light truck transmission installation or removal..

[2 STAGES] - The 2 Stage Transmission Jack can be lowered through its second stage which is a much lower height than the lowest height of the single stage transmission jack. The lower position of the two stage jack allows the operator to safely roll the transmission throughout the shop when mounted on the transmission jack.
[HANDS FREE] - Foot pump and release pedals provide hands free operation to align saddle with transmission.
[QUICK USE] - Speedy pump foot pedal raises telescopic rams to load quickly.
[OVERLOAD PREVENTION] - Built-in safety valve protects against jack over-loading.
[WARRANTY] - Covered by a 2 year warranty and complies with ASME PASE/2014 Safety Standards.

Pro-Lift Telescopic Transmission Floor Jack with 700 lbs capacity is designed to be used as an aid in the removal and installation of automotive and light truck transmissions, transfer cases and transaxles..
This telescopic style transmission jack is for use under an overhead lift or in a garage pit. The chrome-plated rams maximize its high reach operated by a user-friendly handle at your finger tip..
It has the extra wide base with the jack size of 36-1/8 x 32-5/8 inches and lowers center of gravity and promotes stability. Also, the ultra high lift, from 57 1/4" to 76 3/8", to help you better position the load and get the job done with ease..
Rugged steel wheels and swivel full 360 degrees ball bearing casters, it provides smooth maneuvering and positioning for all transmission needs. In addition, the adjustable saddle, which extended from 9 7/8" x 9 7/8" to 18 7/8" x 18 7/8", gives you the ease of alignment..
Unique handle release pedal provides the extra safety and gives you the ability to easier control the speed of in lowering the load. In addition, it has one year warranty from the manufacture. You may contact us for any defects, repairs or questions..

This is our 1100LBS Hydraulic Pressure Transmission Jack, with which you can easily guide a transmission safely and securely. It is features fully adjustable saddle with corner brackets. Comes with foot operated pump and lowering pedal, great lift range by telescopic two-stage hydraulic ram, wide 4-leg base with swivel casters for stability and easy movement. It's ideal for any automotive or light truck transmission installation or removal..
Suitable for Any automotive or light truck transmission installation or removal.

Features: A quick and easy pull pin that makes it easy to adjust the height of the jack.
Durable Construction: Constructed of durable steel.
Powder Coated: Provides maximum rust protection.

This is our 1100LBS Hydraulic Pressure Transmission Jack, with which you can easily guide a transmission safely and securely. It is features fully adjustable saddle with corner brackets. Comes with foot operated pump and lowering pedal, great lift range by telescopic two-stage hydraulic ram, wide 4-leg base with swivel casters for stability and easy movement. It's ideal for any automotive or light truck transmission installation or removal..
Suitable for Any automotive or light truck transmission installation or removal.

Foot-operated pedal instead of hand-operation, for more security and labor-saving manipulation, and lifting pump allow mechanic to position and align the transmission. Suitable for installation or removal of most transmissions from car or light truck..
Raised Height: 68" (+/-2"). Adjustable lift height range from 34" to 68" for different occasions..
Comes with great lift range telescopic two-stage hydraulic ram. Telescopic dual stage hydraulic ram for improving lift range. 2-way tilt transmission carriage complete with safety chains..
Wide heavy duty 4-leg base and 4 cast iron swivel full 360 degrees casters for stability, easy movement and greater manuverability. An auxiliary ring can facilitate you to move and transfer the the jack..
Fully adjustable saddle with corner brackets, provides a max. 30° tilt range and features adjustment knobs for controlling tilt angle to get the load in the perfect position. Strong heavy duty steel construction and paint coat finish for maximum durability..

This cable is designed to reduce interference, connect your portable CD player, mobile phone, iPod and more with 3.5mm earphone jack with your....
Simply connect one set of plugs to the RCA output jacks of the video source, and the other to the input jacks of your component.
High quality corrosion-resistant gold-plated connectors provide superior stereo audio transmission without signal loss and noise.
Compatible with most Mini DV and Digital camcorders made by Sony, Canon, JVC, Samsung, Panasonic, Sharp and other brand camcorders that use a single....
What You Get: 1x HTTX 3.5 mm to 3 RCA Audio Cable (5 FT).
HTTX 12-month warranty and friendly customer service..