Best Tee Hose Barb Fittings

PVC Barbed Tee Fitting - 3/4 PVC Tee Barb Fitting - 3/4 Inch Barbed Insert Tee - Hose Barb Fittings for Tubing Hose Water Line - SCH 40 Barbed Hose Tee Fitting – Barbed Tee PVC Fitting

TOP QUALITY: The water line barbed fitting tees are carefully manufactured under strict quality guidelines and in full compliance with ASTM. Only the highest-grade PVC materials are used offering you the best durability.
MEASUREMENTS: 3/4 Inch barbed Insert x 3/4 Inch barbed Insert x 3/4 Inch barbed Insert barbed tee. Pipe Fitting Class is Sch 40 with Max. Temp of 140 F. Max Pressure 200 psi @ 72 Degrees F. Tee Fitting Connection Type is Insert x Insert x Insert.
WIDE APPLICATION: PVC Barb Tee Fitting can be used for running water lines as flexible tube and hose fittings at home, RV or any commercial plumbing systems.
EASY TO INSTALL: PVC tee hose fittings are lightweight and require no professional knowledge. The fitting process is simple and effortless. PVC can be cut, shaped, welded and joined easily.
MADE IN USA: Our PVC hose connectors are produced in US and have clear environmental advantages over traditional materials - 100% recyclable with increased wear resistance.

Check Stock

LIONMAX Barb Splicer Mender 4 PCS, Brass Barb Union Hose Fittings, 5/16 Inch to 5/16 Inch Barb Hose ID, with 8 Hose Clamps, for Air/Water/Fuel/Oil

【SOLID BRASS MATERIAL】Barb fitting is made of brass. Strong and durable, not easy to rust and corrode. Has a long service life. NOTE: Brass barb hose fitting is not suitable for potable water..
【-65~250°F 150PSI】Hose barb fitting has strong temperature resistance and good pressure resistance. So barb union splicer fitting is often used for water, fuel, oil delivery..
【PACKAGE CONTAINS】5/16'' hose ID barb fitting (4 PCS) + 304 stainless steel hose clamp (8 PCS). You don't need to buy additional accessories..
【TIGHT CONNECTION】5/16 inch ID hose barb fitting is smooth overall without burrs. Size meets the standard. The strong barb and hose clamps make the barbed hose splicer not easy to leak during the connection process..
【WIDE APPLICATION】Brass barb hose fitting is suitable for pipe repair. Various hoses can be connected to 5/16'' hose ID hose barb fittings. Meet your multiple needs..

Check Stock

Brass Barb Union Fittings LIONMAX Barb Splicer Mender Hose Fittings 4 PCS 1/4 Inch to 1/4 Inch Barb Hose ID with 8 Hose Clamps for Air/Water/Fuel/Oil

【SOLID BRASS MATERIAL】Barb fitting is made of brass. Strong and durable, not easy to rust and corrode. Has a long service life. NOTE: Brass barb hose fitting is not suitable for potable water..
【-65~250°F 150PSI】Hose barb fitting has strong temperature resistance and good pressure resistance. So barb union splicer fitting is often used for water, fuel, oil delivery..
【PACKAGE CONTAINS】1/4'' hose ID barb fitting (4 PCS) + 304 stainless steel hose clamp (8 PCS). You don't need to buy additional accessories..
【TIGHT CONNECTION】1/4 inch ID hose barb fitting is smooth overall without burrs. Size meets the standard. The strong barb and hose clamps make the barbed hose splicer not easy to leak during the connection process..
【WIDE APPLICATION】Brass barb hose fitting is suitable for pipe repair. Various hoses can be connected to 1/4'' hose ID hose barb fittings. Meet your multiple needs..

Check Stock

Beduan Stainless Steel 1/2\ Hose Barb, 3 Way Tee T Shape Barbed Co2 Splitter Fitting

Material: Made of 304 stainless steel, corrosion resistant ductility at high temperatures, and low magnetic permeability..
Size: 1/2”Barb x 1/2”Barb x 1/2”Barb – 12mm Barb x 12mm Barb x 12mm Barb..
Barbed fitting creates a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (sold separately)..
Hose fittings are used in systems such as beer brewing, air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation..

Check Stock

YuanTenhwy 3 PCS 3/8 10mm Brass Hose Barb Tee Fittings With 9 PCS Stainless Steel Clamps For Air/Water Hose Splicer 3-Way-T…

【Size】: The outer diameter of Hose barb fitting is 3/8 inch (10mm).
【Packing list】: 3 PCS of 3-way(Type T) Hose barbs fitting with 9 PCS of stainless steel hose clamp.
【Material】: The hose barbs fitting is made of brass, and the hose clamp is made of stainless steel.
【Features】: corrosion resistance, dimensions in line with standards, and overall smooth without burrs.
The solid barb and hose clamp ensure that the hose and the Hose barb fittings are well sealed during connection, and are not easy to leak.
【Application Scenarios】：It is applicable to pipeline installation and maintenance, and is often used to assist in the transportation of gas, water or oil. However, federal laws do not allow the installation of these fittings for drinking water in the United States and its territories..

Check Stock

Soaker Hose 100 FT,Heavy Duty 1/2 inch Rubber Soaker Hoses for Garden Beds Save 70% of Water Drip Irrigation Kit with Connector Set for Lawn&yard,Landscaping

...ange of accessories for a variety of uses,help you make custom length soaker hoses cheap & easy..
Easy to Install: Easy to unfold in garden, raise/flower bed, ground cover or other landscaped areas.Installing the hose system above or below in your garden is simple enough for just about anyone to do.These soaker hose fittings are easier to connect and disconnect.You can screw the end of the soaker hose fittings into the end of either another hose or the exterior faucet on your house.Hoses can easily be moved whenever necessary..
7 YEARS WARRANTY: Customer Satisfaction is our top priority,We Promise our customers 7 years warranty. If your soaker hoses are broken in use, please contact us to get a replacement one or apply a refund. We are glad to resolve customers questions within 24 hours.NOTE: Water Pressure At Regular 60psi Or Lower. Higher Water Pressure Maybe Damage The Hose..
Package Include: 1/2''in X100ft Soaker Hose(with connectors),Clamps X4,3/4" plastic garden hose Shut off valve X 1,3/4" male hose end adapter X1,3/4" end cap * 2,3/4" Washer*2,5/8" end cap *4,5/8" Tee *2,5/8" Coupling*4,5/8" Elbow*2,5/8" barb X 3/4" femaleX1,5/8" barb X 3/4" maleX1,7.5" hose support stakes X10,zip tie.
SAVE UP WATER: Save up to 70% water!Use less water to keep yo....

Check Stock

Beduan Stainless Steel 1/4 Hose Barb 3 Way Tee T Shape Barbed Co2 Splitter Fitting Pack of 2

Material: Made of 304 stainless steel, corrosion resistant ductility at high temperatures, and low magnetic permeability..
Size: 1/4”Barb x 1/4”Barb x 1/4”Barb – 6mm Barb x 6mm Barb x 6mm Barb..
Barbed fitting creates a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (sold separately)..
Hose fittings are used in systems such as beer brewing, air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation..

Check Stock

Bonsicoky 5Pcs Plastic Hose Barb Reducer Fitting 1/2 to 1/4 Hose Barb Union Adapter Connector Pipe Hose Fitting

WHAT CAN YOU GET - 5 x Plastic Hose Barb Reducer Fittings. It can be connected with 1/2" Hose ID & 1/4" Hose ID..
DURABLE MATERIAL - The hose barb reducer fitting is made of durable plastic which is no crack and longer lasting service. The hose barb reducer has a smooth surface and inner wall, which is lightweight and durable..
NICE PERFORMANCE - The barbed edge of the hose barb connector adopts exquisite craftsmanship, which makes it more tightly connected with the hose, stronger sealing, safe and reliable. The deep and smooth barb edge design of the hose barb connector makes work easier and more effective..
WIDE RANGE OF USE - The hose barb reducer fitting can connect hoses quickly and easily. It is suitable for applications in pharmaceutical, food, laboratory, chemical processing and handing, printing, labeling and others..
90 DAYS MONEY BACK GUARANTEE - We believe that Bonsicoky wins your trust with quality and service. If you are not satisfied with the product, please contact us and we will refund the full amount. Now click ‘Add to Cart’ , this will be your most reliable choice and bring you a 100% worry-free shopping experience!.

Check Stock

Joywayus 1/4'(6mm) ID Hose Barb 4 Way Union Fitting Pipe Cross Intersection/Split Brass Water/Fuel/Air

1/4" barb tee to connect 1/4" I.D. hose,we can provide customized orders,including oem..
These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Barbed fitting creates a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (sold separately).For use with plastic or rubber hose.
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.

Check Stock