Best Technical Parameter

Fielect N.O 40℃ 5pcs Normally Open Temperature Switch, KSD-01F Thermal Switch Thermostat Temperature Controller

...probe where it is not accessible by the End User. The instrument must not be opened..
In case of failure or faulty operation send the instrument back to the distributor or to Dixell S.r.l.(see address) with a detailed description of the fault. Consider the maximum current which can be applied to each relay (see Technical Data). Ensure that the wires for probes, loads and the power supply are separated and far enough from each other, without crossing or intertwining..
The XR04CX, in 32x74x50 mm short format, is microprocessor based controller suitable for applications on normal or low temperature refrigerating units. It provides two relay output: one for compressor and the other one for defrost. It provides two NTC probe inputs, one for room temperature and other one to control defrost termination. The instrument is fully configurable through special parameters that can be easily programmed through the keyboard or by the HOTKEY..
Suitable for appliances including:suitable for applications on normal or low temperature refrigerating units.

[Technical Parameter] Shaft Usage: 8 mm / 0.31" to 10 mm / 0.39".
Total Size: 45mm x 34mm / 1.77" x 1.34" (LxD).
[High Quality] Made of high strength aluminum alloy, excellent bearing capacity, long service life.
Need no lubrication, convenient and quiet to use.
[Feature] Stable and reliable performance, with good vibration damping, buffering and electrical insulation performance.
[Application] Widely used in shafting transmission of various mechanical devices, such as pumps, fans, compressors, hydraulic machinery, petroleum machinery, printing machinery, textile machinery, chemical machinery, mining machinery, metallurgical machinery, aviation (helicopter), ship high-speed power transmission system, steam turbine, piston power mechanical transmission, etc.

The unite can automatically connect and shut the power of the equipment according to the fixed control process and time. It has advantages of wide use range, convenient installing, and working reliably, so it is used widely in sorts of lamps, lighting equipment, production equipment, TV equipment and home holder powers..
Technical Parameter: Voltage 12v Clock error: less than +/-2 sec/ day Voltage scope: 80%-110% Ambient Temperature: -10 - 50cel.degree Capacitance load Resistance 25A Relative humidity: less than 95% Consumed power: less than 5VA Installation type: Guide rail / wall hanging Timing range: 1 minute ¨C 168 hours Programmable number: 16 sets Size 120*72*50mm.
Package: 1 * Micro-computer timer switch (12v) 2 * English Manual.

PARAMETER - 20.5x8.0-10 trailer tire, Load Range E, Speed Rate J.
Recommended replacement for boat& motorcycle& cargo trailer, pop-up camper, etc.
MAX LOAD - 10 Ply construction tackles with all heavy-duty load missions easily. Max Single Tire Load: 1520lbs@50psi, Rim Size: 10x6 inch.
PERFORMANCE - Exquisite tread pattern provide exceptional stability and handling, low rolling resistance and side slipping show high performance, for all kinds of terrain use.
SAFETY - Advanced low profile tread design for better control, directional wide grooves expel water and mud, suitable for hard surface utility vehicle applications.
2 years' product warranty (DOT proved), 24h free technical service.

PARAMETER - 20.5x8.0-10 trailer tire, Load Range E, Speed Rate J.
Recommended replacement for boat& motorcycle& cargo trailer, pop-up camper, etc.
MAX LOAD - 10 Ply construction tackles with all heavy-duty load missions easily. Max Single Tire Load: [email protected], Rim Size: 10x6 inch.
PERFORMANCE - Exquisite tread pattern provide exceptional stability and handling, low rolling resistance and side slipping show high performance, for....
SAFETY - Advanced low profile tread design for better control, directional wide grooves expel water and mud, suitable for hard surface utility vehicle....
2 years' product warranty (DOT proved), 24h free technical service.

Full Water Reminder : Compared with the older, the new jewelry cleaner machine adds a full water reminder device. When adding more purified water than....
Purify Water : A water filter is added inside the jewelry steam cleaner machine. Note: Drain the remaining water in the pot before starting each....
Deep Jewelry Cleaner Machine : The 1300W power maintains the stable working pressure output of 4KG, can make the temperature of the injected saturated....
Wide Application : The jewelry cleaner is suitable for all kinds of gold & silver jewelry with elaborate designs, perfect for jewelry studios and....
Technical Parameter : Voltage: 110V, Power: 1300W, Steam pressure: 4KG, Equipment capacity: 2L, Material: SUS 304 stainless steel..

...probe where it is not accessible by the End User. The instrument must not be opened..
In case of failure or faulty operation send the instrument back to the distributor or to Dixell S.r.l.(see address) with a detailed description of the fault. Consider the maximum current which can be applied to each relay (see Technical Data). Ensure that the wires for probes, loads and the power supply are separated and far enough from each other, without crossing or intertwining..

【Parameter】-iSANMATE Wood PLA+ Filament Print Temperature：190℃-225℃. iSANMATE PLA+ filament dimensional: 1.75mm,accuracy +/- 0.03mm, 1KG (2.2LBS)..
【Wood PLA+】- iSANMATE Wood Filament is made up of 20% wood flour and 80% PLA+ with wood color and texture.Able to make products with woody touch.
【High Quality】- iSANMATE Wood PLA + filament has superb layer bonding, and strength and toughness are greater than conventional PLA filament. Easy to use.
【Spool Size】- Spool Diameter:197mm(7.76").
64mm( 2.52") - Spool Hub Hole Diameter: 57mm(2.24")..
【100% Satisfactory Service】-1 year warranty. Provide fast and efficient technical solutions when you have any printing problems. With 24 hours guaranteed reply..

Time setting switch: Will come with a English instruction for time setting switch guiding..
Package included:1x enlarger timer+1x power cable+1x foot switch+1x EN instruction+1x plug converter.
Technical Parameter:Input Voltage: 110V-220V, compatible with different enlarger.Max Power Loading: 600W.Timing Range: 0.1 second to 99 hours.Foot Switch Cable Length: 2M/78.74 inches..
Time Setting Switch:Press “Time Adjust” button’s “—”, and turn on the power switch at the same time. The screen shows “P00” means time range setting start, pressing the “time adjust” button “—” and “=” (represents up and down) to select the time program you want. After selection, please wait 2 seconds, then the setting complete..
Time program setting code as the following:P00: 1-999 seconds.P01: 1-999 minutes.P02: 1-99 hours.P03: 0.1-99.9 seconds.(Note: Program P03 will not present decimal point, e.g. 105 refers to 10.5 seconds.).