Best Tap And Reamer Wrench Set

110 Piece Combination Tap and Die Set Alloy Steel 55°- 60° Metric Tools with Carrying Case + Free Glove Amazing Tour

  • 110 Piece Combination Tap and Die Set Alloy Steel Metric Tools with Carrying Case + Free Glove Amazing Tour.
  • Size:18 x 13 x 2.5"inch / 45 x33.5 x 6.5cm. Weight:14.3lb / 6.5kg. Material upgrading:Alloy Steel 55°- 60°, Sizes Stamped Engraved-etched On the Metal.
  • 35 Taper Taps + 35 Plug Taps + 35 Dies + 2 Tap Wrench M3-M12,M6-M20 + Die Wrench 25mm,38mm O/D + 1 T-Type Tap Wrench M3-M6 + 2 Antiskid Gloves.
  • Known for their ability to start easily, these taps and dies are the most commonly used style and are perfect for most hand threading applications.
  • Ideal for rethreading fasteners and fastener holes for auto and machinery repair. Perfect set for the professional craftsman Tap and die set is designed to thread cutting: tap is used to process internal thread, while the die is for external thread.
Check Stock

Happybuy 110Pcs Tap & Die Set Tungsten Steel Titanium Tap & Die Metric Tool Tap & Die Combination Set For Cutting External & Internal Threads

  • Premium Quality: High-duty heat-treated Tungsten steel construction,  high-hardness, wear-resistant, and its service life is 5-10 times longer than that of non-tungsten taps, durable and reliable for your long-lasting use..
  • Excellent Performance: Fully ground & high-precision tap is super-sharp for your tapping and chip removing operation, running smooth and efficient, offering you excellent performance..
  • Reinforced Stability: Each dies is designed with a lock hole, it can be locked tightly after the screw is aligned and locked, ensures double stability during your operation..
  • Adjustable Tap Wrench: Tap wrench is adjustable: you can set the adjustable basin wrench to either its position for turning clockwise (tightening) or turning anti-clockwise (loosening). You can do this by flipping the jaws 180 degrees over its pivot..
  • Most Popular Sizes Included: This tap and die set comes with 110 pieces in total: 35 pcs plug taps, 35 pieces taper taps, 35 pcs dies, 2 tap holders(M2 - M12 (1/16" - 1/2"& M6 - M20 (1/4" - 3/4")), 2 die holders (200mm (1" diameter bore)& 270 mm (1 1/2" diameter bore) and 1 T-bar tap wrench, most popular sizes included.
Check Stock

Muzerdo 110PCS Standard Sae and Metric Bearing Steel Tap and Die Rethreading Kit

  • CUT & RENEW THREADS: The ABN | Metric Tap and Dies Set 110-Piece Metal Threading Kit cuts and renews external and internal threads to exact standards.
  • Ideal for professional machinists and DIY weekend warriors alike to rethread existing auto and machinery fasteners, remove screws/bolts, cut raw material.
  • Tap wrench fits the different sizes of taps, thread taps are used to process internal thread, thread die set is for external thread, plug taps suitable for cleaning and rethreading.
  • FITS YOUR APPLICATION: Metric – Taper taps (2x0.4, 3x0.5, 4x0.7, 5x0.8, 6x7.5, 6x1, 7x0.75, 7x1, 8x0.75, 8x1, 8x1.25, 9x0.75, 9x1, 9x1.25, 10x0.75, 10x1, 10x1.25, 10x1.5, 11x0.75, 11x1, 11x1.25, 11x1.5, 12x0.75, 12x1, 12x1.25, 12x1.5, 12x1.75, 14x1, 14x1.25, 14x1.5, 14x2, 16x1, 16x1.5, 16x2, 18x1.5,).
  • Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
  • Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
  • BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
  • Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carb....
Check Stock

Drillco 4570E Series High-Speed Steel Taper Pin Reamer, Helical Flute, Round Shank, Uncoated (Bright)/Black Oxide Finish, 1 Size, 2-15/16\ Length

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
  • Available in uncoated (bright) and black oxide finish.
  • Round shanks allow use with a wide variety of toolholding systems.
  • Square shank allows hand (straight and spiral flute) reamers to be held in a tap wrench or vise, depending on whether the reamer of the part is rotated.
Check Stock

Happybuy 86PC Tap and Die Set Combination Metric Tap and Die Sae Tap and Die Set Tungsten Steel Titanium SAE and Metric Tool (86PC Tap and Die)

  • Premium Quality: High-duty heat-treated Tungsten steel construction, high-hardness, wear-resistant, and its service life is 5-10 times longer than that of non-tungsten taps, durable and reliable for your long-lasting use..
  • Excellent Performance: Fully ground & high-precision tap is super-sharp for your tapping and chip removing operation, running smooth and efficient, offering you excellent performance..
  • Reinforced Stability: Each dies is designed with a lock hole, it can be locked tightly after the screw is aligned and locked, ensures double stability during your operation..
  • Adjustable Tap Wrench: Ta wrench is adjustable: you can set the adjustable basin wrench to either its position for turning clockwise (tightening) or turning anti-clockwise (loosening). You can do this by flipping the jaws 180 degrees over its pivot..
  • Most Popular Sizes Included: This tap and die set comes with 86 pieces in total: 39 pcstaps,39 pcs dies, 2 tap holders (M6 to M20 - 1/4" to 3/4"& M3 to M12 - 1/16" to 1/2"), 2 die holders (M25 - 1") & (M38 - 1-1/2")and 1 T-bar tap wrench, most popular sizes included..
Check Stock

Azuno 40PCS Metric Tap and Die Set Professional Hand Tapping Threading Chasing Kit for Home Garage DIY

  • 【40 Piece Tap and Die】: Set in cludes 34 taps & dies, 1 die handle, 1 T-tap wrench, 2 screw-pitch Gauge, 1 screwdriver, 1 tap wrench. Contructed....
  • 【Most Common Sizes in Metric】: 16 Dies & Taps:....
  • 【Performance and Durability】: CNC machined Tap and Dies made by industry-grade GCr15 bearing steel with pronounced hardness and balanced....
  • 【Easy for Storage】: Comes with a heavy-duty delux case, convinient for storage and carrying. It has identified slot for each piece so that to keep....
  • 【Versitile Threading Tool Set】： This professional set is perfect for cutting and renewing external and internal threads to exact standards.....
Check Stock

IRWIN Tools Metric Tap and Hex Die Set, 41-Piece (26317)

  • We're working with a variety of tradesmen to solve endless fastening challenges: Irwin Hanson Taps and Dies are the answer. Whether creating new tools from raw steel or repairing damaged and worn threads, achieving a precise fit is essential.
  • Irwin Industrial Tools sets the standard for delivering quality every step of the way in your threading applications.
  • TR-88 adjustable handle tap wrench, TR-73 two-in-one tap wrench, TR-50 2-in-1 tap wrench.
  • 18 leaf standard thread pitch gauge and screwdriver.
Check Stock

IRWIN Tap And Die Set with Drill Bits Machine Screw/SAE/Metric 117-Piece 26377

  • Ideal for rethreading fasteners and fastener holes for auto and machinery repair.
  • Constructed of high carbon steel for durability.
  • Puts commonly needed taps, dies, drill bits, and extractors at your fingertips.
  • Perfect set for the professional craftsman.
  • Contains 117 of the most commonly needed machine screw plug tap and hex die sizes, drill bits, spiral screw extractors, an adjustable handle tap wrench, 2-in-1 tap wrench, t-handle wrench, pitch gauges, and a plastic case.
Check Stock

Machine Tap 1/2\-13 UNC Thread Pitch 4 Flutes, High Speed Steel Thread Forming Tap, Uncoated (Bright) Finish, Round Shank with Square End, Plug Chamfer, HSS Machine Screw Plug Tap

  • CUT & RENEW THREADS: The ABN | Metric Tap and Dies Set 110-Piece Metal Threading Kit cuts and renews external and internal threads to exact standards.
  • Ideal for professional machinists and DIY weekend warriors alike to rethread existing auto and machinery fasteners, remove screws/bolts, cut raw material.
  • Tap wrench fits the different sizes of taps, thread taps are used to process internal thread, thread die set is for external thread, plug taps suitable for cleaning and rethreading.
  • FITS YOUR APPLICATION: Metric – Taper taps (2x0.4, 3x0.5, 4x0.7, 5x0.8, 6x7.5, 6x1, 7x0.75, 7x1, 8x0.75, 8x1, 8x1.25, 9x0.75, 9x1, 9x1.25, 10x0.75, 10x1, 10x1.25, 10x1.5, 11x0.75, 11x1, 11x1.25, 11x1.5, 12x0.75, 12x1, 12x1.25, 12x1.5, 12x1.75, 14x1, 14x1.25, 14x1.5, 14x2, 16x1, 16x1.5, 16x2, 18x1.5,).
  • Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
  • Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
  • BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
  • Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carb....
Check Stock