Best Tablets With Ir Blaster

Harmony IR Adapters, Ancable 2-Pack 2.5mm Mono Plug to 3.5mm Mono Jack Connector for Logitech Harmony Hub and IR Blaster, IR Emitter Extenders, IR Repeaters, IR Receivers

One ring mono adapter, 2.5 mm male to 3.5 mm female adapter. Caution, before you buy make sure you check the number of rings on the plug you are adapting.
This 3.5mm to 2.5mm adapter work perfectly to adapt a standard sized 3.5mm IR blaster, IR Emitter Extenders, IR Repeaters or IR Receivers to fit into new logitech harmony hub (which has 2.5mm port).
If your IR blaster is 3.5mm (like iphone or android aux port size)and you want to use it on new logitech harmony hub, 2.5 to 3.5 adapter is the right choice for you.
Package include: 2PCS 2.5mm mono plug makes you always have a backup at home or office.
100% GUARANTEE, all Ancable products come with 12 months warranty, you are protected with our 100% No Questions Asked Guarantee for either a replacement or refund.We care about only putting out high quality products that satisfy your needs..

Check Stock

Cable Matters Infrared Remote Extender Cable, IR Repeater Cable - 10 Feet

IR remote control cable extends the signal to a video source like a Blu-ray player so it can be controlled from your TV.
Blue LED in IR Receiver bulb verifies the signal transmission.
Home theater accessory repeats the IR signal to a DVD player, STB box, Receiver or other A/V source with an IR sensor.
Route the infrared remote control extender cable out of sight with a wall mounted TV.
Install the IR Transmitter end in a concealed equipment closet to hide a CATV box and control it remotely.
Simple installation of this lightweight IR cable.
Locate the IR Blaster near the source sensor to repeat the signal to the source.
Place the IR Receiver in a convenient location with line of sight of your hand-held remote.
IR Tx and Rx cables have adhesive circles on the back for mounting.
USB powered IR extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
USB cable on the IR remote extender cable connects to a TV USB power port or to a USB wall charger.
Universal compatibility of IR extender cable with most A/V equipment with infrared sensors (not RF).
30 degree IR Receiver angle provides plenty of leeway to get the right angle with your remote.

Check Stock

Infrared Remote Extender Cable -ir Extender for Cable Box Hidden IR Repeater System with 1 Emitters 1 Receiver 10FT

{IR REMOTE CONTROL} cable extends the signal to a video source like a Blu-ray player so it can be controlled from your HDTV.
{HOME THEATER ACCESSORY} repeats the IR signal to a DVD player, STB box, Receiver or other A/V source with an infrared sensor.
{SIMPLE INSTALLATION} of this lightweight IR cable.
Locate the IR Blaster near the source sensor to repeat the signal to the source.
{UNIVERSAL COMPATIBILITY} with most A/V equipment with infrared sensors (not RF).
180 degree IR Receiver angle provides plenty of leeway to get the....
{USB POWERED IR }extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
Connect to an HDTV USB port or to a USB wall charger(Tip:....

Check Stock

3ft 20KHz - 60KHz Universal IR Blaster and Receiver Cable kit, 3.5mm Jack Cable Compatible with DVR HDMI Extender, DVD Player, Blu-ray Player etc.

【Passes IR Communication】-- Used with an IR Repeater kit to control a device by the existing IR controller, control the IR devices between two rooms such as adjusting the volume or changing TV Channels.
【20-60KHz Range】-- Wider frequency range than the similar infrared receiver cable in the market, which make the cable stronger and provide you better experience..
【High Sensitivity Sensor】-- Easily control DVD player or other HDMI source from remote position up to 10 ft(3m).
【Plug and Play】-- Comes with adhesive backing sticks directly onto different devices,applied to HDMI Extender.
IR blaster plugs directly into the IR out port of HDMI Extender, IR receiver directly into the IR in port of HDMI Extender.
【Great Compatibility】-- With 3.5 mm jack connector, the universal IR cable is supportive for most of audio/video devices such as HDMI Extender ,amplifier, cable box, stereo receiver, satellite TV receiver, CD player, DVD player, Blu-ray player or any other components which is controlled by IR signal(NOTE: Please stick the IR Emitters on the IR interface of devices you want to control remotely).

Check Stock

Smart IR RF Universal Remote: Infrared WiFi Remote Controller, IR/RF Smart Home Hub, IR Emitter and RF Blaster for Fan AC TV DVD, Tuya/Smart Life App Control, Compatible with Alexa Google Assistant

...with 2.4 GHz WiFi, you can remotely control control appliances via the Smart Life/Tuya app even away from home.
and turn your smartphone into a universal remote. You can also share the device with your family. (NOTE: Does not support 5GHz Wifi).
VOICE CONTROL & INTELLIGENT LINKAGE FUNCTION: Infrared Universal Remote Blaster compatible with Alexa and Google Home for simple, hands-free voice control, such as “Alexa, next channel on TV” … Set your smart routine in the app.
For instance, When motion is detected, turn on your lights via remote control..
DIY FUNCTION: Support DIY function to manual learning of the original controller as needed, Copy same function from original IR/RF remote to control Devices such as fireplaces, heater, ceiling fans, solve your problem of finding a remote controller or the appliance model is not available on the app..
SIMPLE OPERATION & AFTER SALES: No hub required and no monthly fee. Easily add devices in the App. IR blaster comes with a USB cable, you may plug wherever there is a socket or USB port. Hidden back USB power supply, long-term power supply, say goodbye to power outages. Gaoducash provide 24-months warranty for Wi-Fi Remote Control..

Check Stock

SZBJ IR Remote Control Extender Cable,IR Repeater Kit Cable,IR Repeater Cable 4 Emitter

...IR signal to a DVD player, STB box, Receiver or other A/V source with an infrared sensor.
Route the cable out of sight with a wall mounted HDTV.
Install the IR Transmitter end in a concealed equipment closet to hide a CATV box and control it remotely.
{SIMPLE INSTALLATION} of this lightweight IR cable.
Locate the IR Blaster near the source sensor to repeat the signal to the source.
Place the IR Receiver in a convenient location with line of sight of your hand-held remote.
IR Tx and Rx cables have adhesive circles on the back for mounting.
{UNIVERSAL COMPATIBILITY} with most A/V equipment with infrared sensors (not RF).
180 degree IR Receiver angle provides plenty of leeway to get the right angle with your remote.Remote control signal receiving real-time response to fast forward without delay.
{USB POWERED IR }extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
Connect to an HDTV USB port or to a USB wall charger(Tip: Devices that need remote control must be placed in a place where your remote control cannot be directly remotely controlled. Otherwise, the signal from the remote control and the remote control signal after forwarding will be sent to the set-top box at the same time. The signals are not synchronized and will inter....

Check Stock

OREI 1x4 HDMI Extender Splitter Over Single Cable CAT6/7 1080P With IR Remote EDID Management - Up to 132 Ft - Loop Out - Low Latency Black

Distribute 1 HDMI source to 4 HDMI displays over Network Cable Simultaneously..
HDMI Transmitter is equipped with 4 Port CAT6 Output. And 1 Additional HDMI Output to connect to a local display or monitor..
IR Remote Control. Supports 20~60Hz IR Pass Back, Control a DVD Player or Other HDMI Video Source from a Remote Location with the included IR cables....
Plug & Play Setup without any Software Installation. Compatible with CAT6/6a/7 Network Cables. The highest Resolution Supported is 1920×[email protected],....
Includes: 1 x Transmitter, 4 x Receivers, 4 x Power Adapter, 1 x IR Blaster Cable, 4 x IR Receiver Cables, 1 x User Manual. 1 Year OREI Manufacturer's....

Check Stock

TNP IR Infrared Remote Control Extender Repeater Cable (8.2 Feet) - IR Signal Receiver & IR Emitter Blaster Extension Cable Wire Cord USB Powered System Kit

IR remote control cable extends the signal to a video source like a Blu-ray player, DVD player, STB box, AV receiver or other A/V source with an infrared sensor so it can be controlled from your HDTV.
Simple installation IR Repeater cable allows you to control home theater components located behind closet cabinet doors.
Place the IR emitter blaster near the source sensor to repeat the signal to the source.
Place the IR Receiver in a convenient location with line of sight of your hand-held remote.
IR Tx and Rx cables have adhesive circles on the back for mounting.
USB powered IR extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
Connect to an HDTV USB port or to a USB wall charger power supply (sold separately).
Compatible with most A/V equipment with infrared sensors (not RF).

Check Stock

Infrared Remote Extender Cable -ir Extender for Cable Box Hidden IR Repeater System with 1 Emitters 1 Receiver (20FT)

...IR signal to a DVD player, STB box, Receiver or other A/V source with an infrared sensor.
Route the cable out of sight with a wall mounted HDTV.
Install the IR Transmitter end in a concealed equipment closet to hide a CATV box and control it remotely.
{SIMPLE INSTALLATION} of this lightweight IR cable.
Locate the IR Blaster near the source sensor to repeat the signal to the source.
Place the IR Receiver in a convenient location with line of sight of your hand-held remote.
IR Tx and Rx cables have adhesive circles on the back for mounting.
{UNIVERSAL COMPATIBILITY} with most A/V equipment with infrared sensors (not RF).
180 degree IR Receiver angle provides plenty of leeway to get the right angle with your remote.Remote control signal receiving real-time response to fast forward without delay.
{USB POWERED IR }extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
Connect to an HDTV USB port or to a USB wall charger(Tip: Devices that need remote control must be placed in a place where your remote control cannot be directly remotely controlled. Otherwise, the signal from the remote control and the remote control signal after forwarding will be sent to the set-top box at the same time. The signals are not synchronized and will inter....

Check Stock